Switch TX Core chip - BOOT.DAT missing

[SlavaX]

Hello,
I have a question
I have TX Core chip, but still not installed in a console.
If I do it, will the chip download his licence (BOOT.DAT) or not ? If not, is there a chance to get the BOOT.DAT for it?
I search a lot, bot no answer

Thanks

 

[fatherjack]

have a look here:
https://gbatemp.net/threads/hack-sxos.582831/
YOU put the boot.dat on SD yourself - but you will need a license.dat to run SX OS

better still, go straight to Atmosphere and avoid the headache above

 

[SlavaX]

have a look here:
https://gbatemp.net/threads/hack-sxos.582831/
YOU put the boot.dat on SD yourself - but you will need a license.dat to run SX OS

better still, go straight to Atmosphere and avoid the headache above

Hello,
I am not sure You understood.

Have: N Switch - original, V2 -- PATCHED
TX CHIP -- not installed now

What is Your advise to get SX OS working on PATCHED V2 with or without TX CHIP?

 

[CompSciOrBust]

Hello,
I am not sure You understood.

Have: N Switch - original, V2 -- PATCHED
TX CHIP -- not installed now

What is Your advise to get SX OS working on PATCHED V2 with or without TX CHIP?

You can only hack patched consoles with a chip.
Since the license servers are dead you will not be able to activate SXOS. Your only option is to use Atmosphere.
You can run Atmosphere by putting the SX Gear (NOT SXOS) boot.dat on your SD Card and naming the Atmosphere payload payload.bin

 

[binkinator]

Hello,
I am not sure You understood.

Have: N Switch - original, V2 -- PATCHED
TX CHIP -- not installed now

What is Your advise to get SX OS working on PATCHED V2 with or without TX CHIP?

@fatherjack gave you a link to hacking the license.dat file so you can run SXOS as per your request. I assure you he understands your question and his answer is correct.

@CompSciOrBust is telling you that many folks are migrating to Atmosphere because the last switch Firmware supported by SXOS is 11.0.0. Atmosphere is the only modern option. This is one way, as mentioned, to get SX Gear to boot a Hekate/Atmosphere payload: https://sx-boot-dat-creator.herokuapp.com/

Either way you must install a mod chip to hack a V2 (patched) Switch.

Here‘s some reading to get you started: https://rentry.org/SwitchHackingIsEasy

 

[CompSciOrBust]

@fatherjack gave you a link to hacking the license.dat file so you can run SXOS as per your request. I assure you he understands your question and his answer is correct.

@CompSciOrBust is telling you that many folks are migrating to Atmosphere because the last switch Firmware supported by SXOS is 11.0.0. Atmosphere is the only modern option. This is one way, as mentioned, to get SX Gear to boot a Hekate/Atmosphere payload: https://sx-boot-dat-creator.herokuapp.com/

Either way you must install a mod chip to hack a V2 (patched) Switch.

Here‘s some reading to get you started: https://rentry.org/SwitchHackingIsEasy

The SXOS crack doesn't work on Mariko consoles (unless OP means they have a patched V1?) so he won't be able to use it.

 

[binkinator]

The SXOS crack doesn't work on Mariko consoles (unless OP means they have a patched V1?) so he won't be able to use it.

Case closed.

Atmosphere is the only option.

 

[fragged]

Case closed.

Atmosphere is the only option.

Yes, OP needs to flash Spacecraft-NX to their SX Core to be able to do that:
https://github.com/Spacecraft-NX/firmware

 

[0x3000027E]

Yes, OP needs to flash Spacecraft-NX to their SX Core to be able to do that:
https://github.com/Spacecraft-NX/firmware

Nah, he can still use SX firmware on the chip, using SX Gear v1.1 for boot.dat, Hekate as payload.bin, and go from there. No reason to flash Spacecraft on a Core/Lite unless it is an OLED install.

 

[SlavaX]

Thanks so much for the advice friends. I'm going to read it all.