Switch OLED missing the CMD capacitor

[leerz]

Don't mean to Necro, but thought i'd share this, if you do not have a booklet but have a bunch of donor boards around, these resistors are the same as the resistor on the CMD point,
MB is a HAC-CPU-21

 

[lehason15069]

Meanwhile I received another OLED and while I was doing the mod I measured the resistor.
Found a similar value on an old 3DS board and harvested it

Thx for the information, though!

Cheers!

your resistor is 3.5k or 4.7k ? i lost one but i dont know which one

Post automatically merged: Apr 20, 2023

Meanwhile I received another OLED and while I was doing the mod I measured the resistor.
Found a similar value on an old 3DS board and harvested it

Thx for the information, though!

Cheers!

your resistor is 3.5k or 4.7k ? i lost one but i dont know which one

Post automatically merged: Apr 20, 2023

Nice!

i saw you said it is 3.5kohm but in the post they said it is 4.7Kohm which one is correct

 

[mvmiranda]

your resistor is 3.5k or 4.7k ? i lost one but i dont know which one

Post automatically merged: Apr 20, 2023

your resistor is 3.5k or 4.7k ? i lost one but i dont know which one

Post automatically merged: Apr 20, 2023

i saw you said it is 3.5kohm but in the post they said it is 4.7Kohm which one is correct

The CMD is 4.7k for sure!
Cheers!

 

[lehason15069]

The CMD is 4.7k for sure!
Cheers!

thank you so much

 

[Gazzza]

[oled]
hey guys, i was doing the mod but i got some troubles with the capacitors ..
flipping the motherboard 2 capacitors fell off, one was found but the other one is lost
can you tell me the value of this ? (the red one)
also if you have some suggestions on how i should solder it to the motherboard it would be perfect
THX for the support

 

[Gazzza]

[oled]
hey guys, i was doing the mod but i got some troubles with the capacitors ..
flipping the motherboard 2 capacitors fell off, one was found but the other one is lost
can you tell me the value of this ? (the red one)
also if you have some suggestions on how i should solder it to the motherboard it would be perfect
THX for the support

i think i found out the capacity of this one should be 0.1nF or 100pF

 

[dewolf]

Hello! I need help to identify the missing capacitor near emmc. Switch Oled. Would somebody be so kind to measure the capacitor from their own switch if possible.

hello, did you find the value? i miss that capacitor too

 

[lehason15069]

The CMD is 4.7k for sure!
Cheers!

i have replace it and it word fine now. Thank you very much.

 

[Deleted member 664326]

Can someone confirm the capacity of this resistor next to the emmc.

 

[heinrich_frei]

Can someone confirm the capacity of this resistor next to the emmc.

2.2 uF 0402

 

[Blakejansen]

That resistor is 3.5Kohm. I knocked it off myself and lost it. sthetix got the value for me from his working board.

You sure it is 3.5k? People here are saying 4.5k and I just soldered a 3.5k resistor because of your comment.

 

[sean222]

You sure it is 3.5k? People here are saying 4.5k and I just soldered a 3.5k resistor because of your comment.

I can't remember this...you quoted my post from 2 years ago, lol. But yes, whatever resistor I soldered on worked just fine. Hope you didn't break something else...
Might as well buy the 4.5k and try that too...

I updated my post from 2 years ago adding this:
These people seem certain it's 4.7Kohm.

 

[DaszkaBuba]

Hello!
I have a Switch OLED someone else tried to perform a modchip install and knocked off the CMD resistor in the process.

View attachment 286972

He didn't try to turn the board on when he noticed he removed the res.
Does anyone happen to know the resistor value?

Thanks!

Resistor 10k I repaired an OLED with a damaged resistor, it gave a raspberry screen, bootloader error with error codes.
It turned out to be a resistor and it's a big problem.
CMD resistors can be damaged during soldering, flex lose their value when touched with a tip, where the new ones I replaced don't have such problems.
I can write that selectively the resistors are so weak that they are easy to damage.

 

[tsukimaru]

Meanwhile I received another OLED and while I was doing the mod I measured the resistor.
Found a similar value on an old 3DS board and harvested it

Thx for the information, though!

Cheers!

Whats the resistor you used on the 3ds? I have a bunch of donor boards and I'm in a pinch trying to get a replacement