Hardware Switch Lite Not Charging - draws only 0.10A [Solved]

Dokuta

New Member
OP
Newbie
Joined
Apr 14, 2021
Messages
1
Trophies
0
Age
34
XP
51
Country
France
Hello !

A customer brought me 2 Nintendo Switch Lite with the exact same problem. The customer asked me to replace both Type-C ports because his kids damaged them.

After the USB replacement, both consoles didn't charge, drawing only 0.10A on the ampmeter. I thought BQ24193 was damaged as usual. The capacitor highlighted was indeed shorted so I removed the BQ24193 and the "shorted" cap from the board but even after this the short was still present.

After some testing I found that all pins on the battery connector were shorted to ground. At the back of the motherbord I found another capacitor shorted near a component with this label : +17050

I removed this component and all shorts on the motherboard disappeared. I was able to find the same component on a gen 1 Nintendo Switch board and after the replacement, the battery charged normally.

Since then I had this exact same problem on another Switch Lite and the same chip was damaged. I hope this could help someone !
 

Attachments

  • BQ24193 + Shorted Capa.jpg
    BQ24193 + Shorted Capa.jpg
    1.1 MB · Views: 381
  • +17050 + Shorted Capa.jpg
    +17050 + Shorted Capa.jpg
    1,015 KB · Views: 323
  • Like
Reactions: eyeliner and de9ed

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: Lol rappers still promoting crypto