Switch issue?

[NuadaXXX]

Hi!

My problem is, if I start the switch without SXcore, then I get only black screen but with chip i can start the stock OFW over hekate but only with the hekate_ipl.ini config, if i use the option right down "OFW" I get thus black screen.


I use OFW for online and emuNAND for the other stuff

How can I fix that problem. ?

 

[Hayato213]

Hi!

My problem is, if I start the switch without SXcore, then I get only black screen but with chip i can start the stock OFW over hekate but only with the hekate_ipl.ini config, if i use the option right down "OFW" I get thus black screen.


I use OFW for online and emuNAND for the other stuff

How can I fix that problem. ?

Just use hekate ipl option to boot into stock

 

[NuadaXXX]

Just use hekate ipl option to boot into stock

True, but that doesn't answer the question of why the switch without a chip is just a toaster?

 

[Hayato213]

True, but that doesn't answer the question of why the switch without a chip is just a toaster

Probably have to do with the SX Core

 

[SylverReZ]

It maybe possible that there's a problem with the chip itself.

 

[NuadaXXX]

It maybe possible that there's a problem with the chip itself.

U mean the SX Core has something broke that the switch now not more without a chip starts, because I have plugged out the chip and then the switch won't start ?

 

[SylverReZ]

U mean the SX Core has something broke that the switch now not more without a chip starts, because I have plugged out the chip and then the switch won't start ?

That maybe possible. But have you tried injecting a payload using TegraRCMGUI on the PC side? If it doesn't work, then the Switch could be the problem.

 

[NuadaXXX]

That maybe possible. But have you tried injecting a payload using TegraRCMGUI on the PC side? If it doesn't work, then the Switch could be the problem.

Not on this ipatched console.

 

[SylverReZ]

Not on this ipatched console.

You tried desoldering the SX Core from your console? If it powers on just fine, then its the chip not the console.

Post automatically merged: Nov 20, 2022

U mean the SX Core has something broke that the switch now not more without a chip starts, because I have plugged out the chip and then the switch won't start ?

What did you previously do last on this console that has made it not work?

 

[NuadaXXX]

You tried desoldering the SX Core from your console? If it powers on just fine, then its the chip not the console.

Post automatically merged: Nov 20, 2022

What did you previously do last on this console that has made it not work?

yes.. And then the switch won't turn on, only blackscreen.

 

[SylverReZ]

yes.. And then the switch won't turn on, only blackscreen.

Did it work the last time the chip was in?

 

[NuadaXXX]

i wanted to update the chip from spacecraft to HWfly, and i have startet with "sdloader.enc" and after that update the switch had only a blackscreen.

Then i have flashed with usb the other stuff from HWfly, but the chip has only pulsing green and was not starting the console also after a whole night of green pulsing.

Then i have back flashed to spacecraft... also Blackscreen.

Then i have flashed to the sx firmware... also blackscreen.

Then i have plugged out the chip from the MB. and the switch has also not startet. (i was thinking the switch is broken)

Then I have flashed again the chip to spacecraft not sure 10 times or so again and again.


And now it starts again to Hekate but only with a chip, without SX Core = blackscreens.

Post automatically merged: Nov 20, 2022

Did it work the last time the chip was in?

The problem starts with flashing "sdloader.enc" V071 over the toolbox.

I have a "dumped_sdloader.enc" (backup) but not sure if it's a good idea to flash that.