Switch is too slow CFW

[Litrik]

Let's see if someone can help me since I update my switch, after a day or when I do a reboot it gets slow, let's go it's almost impossible to play ... thinking it was the Micro SD I bought a new Samsung Select, but it's still the same. It puts the console slow (it costs you to enter spends the hbmenu) I take out the card I format it, and everything goes well again. Yesterday I was playing zelda and it was perfect and now every time I walk 2 steps I start to load ... I don't know why it could be... I understand that there is some problem with the atmosphere. But of course I don't know what it can be. I clean up the installation by removing the files from github. Greetings

 

[Waicol]

I would first backup everything and try a clean installation of atmosphere + patches. If that still gives you issues you should run hekate and see if you get a 1-bit mode message, that could mean that your sd card module and/or connector has broken pins.

If you don't get a 1-bit message you still should go to tools, then sdcard and do a test, that will show if the card has any reading errors and if the same happens with different cards then your module or connector are damaged.

 

[Waicol]

Then you should check if the fan starts spinning when running games, your issue might be related to heat throttle. Try running a game with and without the joycons connected, there's a known issue of shorting of the fan when the left joycon is connected.

 

[Litrik]

Then you should check if the fan starts spinning when running games, your issue might be related to heat throttle. Try running a game with and without the joycons connected, there's a known issue of shorting of the fan when the left joycon is connected.

I have tried what you tell me and the fan works. hekate does not give any error. and fan its working

Post automatically merged: May 5, 2023

I just discovered that by deleting the erpt_reports folder it works as normal again

 

[marcomavil]

I have tried what you tell me and the fan works. hekate does not give any error. and fan its working

Post automatically merged: May 5, 2023

I just discovered that by deleting the erpt_reports folder it works as normal again

Dude, I deleted the erpt_reports and finally the issue solved!!!! Tankyou!!!! I've been struggling with this for weeks!!!

Thanks a lot man!!!