Super Smash Bros. Brawl Dual Layer

Discussion in 'Wii - Hacking' started by Unfortune, Oct 14, 2010.

Oct 14, 2010
  1. Unfortune
    OP

    Member Unfortune GBAtemp Fan

    Joined:
    May 10, 2009
    Messages:
    342
    Location:
    Alberta, Canada
    Country:
    Pakistan
    As I mentioned in my old thread, my Super Smash Bros. wasn't working.

    Now I have found out that it`s not my Wii's fault. 2 other Wii's have the same problem, with the same discs.

    I wasted 4 Memorex DVD+R DL discs [​IMG]

    (I used the same .iso on all of them....)

    The thing is...
    When I try to verify my burn on ImgBurn, halfway through it says it wasn't burned properly! This is verifying the disc, not burning. And when I try it on my Wii, I can`t play online, and single player goes to the green error screen after the 2nd movie. (as I said in my old thread)

    I have used the same .ISO file that I used for burning on my friend`s USB stick, and it has worked fine.


    So I`m guessing it is either the .ISO`s fault, or the Dual Layer Media`s fault.
    But I don`t see why it could be either, since:

    1. The same iso worked perfectly fine on a USB Stick with Wiiflow.
    2. The Memorex DVD+R DL's worked for my friend's XBOX 360 games.

    Please help, thanks.
     
  2. _Chaz_

    Member _Chaz_ GBAtemp's Official Mook™

    Joined:
    Sep 12, 2009
    Messages:
    5,624
    Country:
    United States
    Why not just use an external HDD or a flash stick?

    I'm not sure what the problem is with the burning process, but if you know of a method that works, why not use it?
     
  3. Fudge

    Banned Fudge Remember that death is not the end, but only a tra

    Joined:
    Aug 26, 2009
    Messages:
    2,655
    Location:
    New York
    Country:
    United States
    Memorex media is shit. Use Verbatim. Anyway, did you set the layer break? The layer break is 2084960.
     
  4. Unfortune
    OP

    Member Unfortune GBAtemp Fan

    Joined:
    May 10, 2009
    Messages:
    342
    Location:
    Alberta, Canada
    Country:
    Pakistan
    Yeah, thats what I set it to.

    And @_Chaz_ Because I don't have a USB HD. That was my friend's.
     
  5. person66

    Member person66 If it isn't edited, it isn't a true person66 post

    Joined:
    Jun 16, 2009
    Messages:
    1,110
    Location:
    Canada
    Country:
    Canada
    I thought DVD+R disks didn't work well with the wii.
    Then again, if the game starts I guess that probably isn't the problem
    What speed are the disks burned at?
     
  6. GrEvilKin

    Newcomer GrEvilKin Advanced Member

    Joined:
    Jul 27, 2010
    Messages:
    57
    Country:
    Canada
    I've got Memorex media, and SSBB is the only game I burned on them. I didn't play much with it, all I did was start a game and play like a minute. No errors. IMGBurn said it was RITEK media and that's the best brand as far as I know. And It didn't give a verify error for me. Check what media code your Memorex's are with IMGBurn, if it's RITEK the medias are fine. Second, you should burn with a Pioneer burner, those were the best in the Gamecube days because the drive was very picky / didn't give much room for non 100% perfect burns. I assume the Wii is the same way.

    I don't know about the Xbox but it has nothing to do with Nintendo hardware, probably the drive in those consoles is more normal and can read more medias.

    It's either your medias or your burner.
     
  7. ocdetective

    Member ocdetective GBAtemp Advanced Fan

    Joined:
    Mar 19, 2008
    Messages:
    601
    Country:
    Malaysia
    Where did you get the idea that Ritek is the best media? It is considered second class in comparison to media from Mitsubishi/Verbatim plus the dual layer is reported to have had layer break issues.
    http://www.digitalfaq.com/reviews/dvd-media.htm
    I agree though its definitely a media or burn problem (either the burner itself - make sure you have up to date firmware on it or the speed used) or possibly a combination of the two given that it will not verify the disc!
     
  8. CarbonX13

    Member CarbonX13 GBAtemp 台灣人

    Joined:
    Aug 27, 2010
    Messages:
    1,399
    Location:
    Vancouver, B.C.
    Country:
    Taiwan
    Go get yourself some DVD-R, as some Wiis have trouble running DVD+R despite being able to run backups. Mine struggled to read DVD+R, but once I swapped over to DVD-R, everything worked perfectly.
     
  9. jan777

    Member jan777 motion control..? srsly? so 2008. 3DS is teh bombz

    Joined:
    Jan 4, 2008
    Messages:
    2,829
    Country:
    Philippines
    I find memorex media to have problems with certain burners. One time, i wasted 2 dvd on our PC's burner, but when i used our laptop's burner, every game worked so far. keep in mind I am Burning 360 games.)

    in that case, its prolly your iso.

    Id recommend just buying a flash stick as it is practical, you can reuse it everytime and not have to buy more DVDs.
     
  10. Gangboy

    Newcomer Gangboy Advanced Member

    Joined:
    Sep 21, 2007
    Messages:
    88
    Country:
    Netherlands
    Nahh forget about Memorex.

    The media I used before my USB drive, was a Arita DVD+DL 4x, also burn my Xbox360 games with the same discs and never had any problems. Don't use the 8x cause they were a pain... [​IMG]
     
  11. GrEvilKin

    Newcomer GrEvilKin Advanced Member

    Joined:
    Jul 27, 2010
    Messages:
    57
    Country:
    Canada
    If you use only a chip, DVD-R DL won't work, you can't set layer break on those.
     
  12. GrEvilKin

    Newcomer GrEvilKin Advanced Member

    Joined:
    Jul 27, 2010
    Messages:
    57
    Country:
    Canada
    Great link! But mine work just fine and no layer break issues. Ritek G04-05 were the best for Gamecube games, I assumed Ritek media still was the best. I'll buy Verbatim from now on, but they're hard to find where I live. The +R DL I mean.
     

Share This Page