Hacking SNEEK+DI quick guide

[scooby74029]

UNEEK+DI works .. :

1) only with 4.2/4.3 NAND or earlier too ? ModMii mentions 4.2/4.3 I think
2) only FAT32 HDD or NTFS too ?



thanks

I got a hdd partitioned as fat32 primary and active with 4.2 virgin nand on it

Would my second partition which is wbfs effect anything?

no it shouldnt i am running a verbitum 250gig part#1 fat32 200gig part#2 wbfs 20gig (just approx.)

my runs fine

What rev is your uneek and whats your file structure. i have the same hdd and i have been trying for days to get this thing to work but i keep getting black screens.

i am running my original nand dump of 4.2u uneekr140

file struct is

sd bootmii\armboot.bin
sd sneek\kernel.bin ( boot2.bin renamed kernel.bin)
usb sneek\font.bin
'' \dimodule.elf
'' \esmodule.elf
'' \fsmodule-sd.elf
'' \fsmodule-usb.elf
'' \diconfig.bin(uneek makes this)
if you want sneekycompiler3.4 will do this for you automatically if you want it to all you have to do is copy the folder it makes

 

[Dispel]

UNEEK+DI works .. :

1) only with 4.2/4.3 NAND or earlier too ? ModMii mentions 4.2/4.3 I think
2) only FAT32 HDD or NTFS too ?



thanks

hmm any ideas ? I assume 4.0 works for UNEEK+DI as well, but is there any difference between it & 4.2/4.3 ?


also, only FAT32 is supported as i understand, correct ? not NTFS ?

 

[OverjoY]

UNEEK+DI works .. :

1) only with 4.2/4.3 NAND or earlier too ? ModMii mentions 4.2/4.3 I think
2) only FAT32 HDD or NTFS too ?



thanks

hmm any ideas ? I assume 4.0 works for UNEEK+DI as well, but is there any difference between it & 4.2/4.3 ?


also, only FAT32 is supported as i understand, correct ? not NTFS ?

1. UNEEK+DI only works with 4.2e, 4.3e, 4.2u and 4.3u. It's possible to make it work with 4.0 and other regions if u add the right menupatches.

2. Yep, only FAT32 is supported.

 

[data1880]

UNEEK+DI works .. :

1) only with 4.2/4.3 NAND or earlier too ? ModMii mentions 4.2/4.3 I think
2) only FAT32 HDD or NTFS too ?



thanks

I got a hdd partitioned as fat32 primary and active with 4.2 virgin nand on it

Would my second partition which is wbfs effect anything?

no it shouldnt i am running a verbitum 250gig part#1 fat32 200gig part#2 wbfs 20gig (just approx.)

my runs fine

What rev is your uneek and whats your file structure. i have the same hdd and i have been trying for days to get this thing to work but i keep getting black screens.

i am running my original nand dump of 4.2u uneekr140

file struct is

sd bootmii\armboot.bin
sd sneek\kernel.bin ( boot2.bin renamed kernel.bin)
usb sneek\font.bin
'' \dimodule.elf
'' \esmodule.elf
'' \fsmodule-sd.elf
'' \fsmodule-usb.elf
'' \diconfig.bin(uneek makes this)
if you want sneekycompiler3.4 will do this for you automatically if you want it to all you have to do is copy the folder it makes

I google'd and I think v3.3 is the highest out right now. I used it for UNEEK and UNEEK+DI, with a virgin NAND then my original NAND on each, and I still got either a black screen or a complete no-signal screen. I also tried using the original Sneek Installer v0.1.5b, compiling my own sneek, using ModMii, trying r140 r125 and 123, but I always end up with a blank screen.
Tried so many different combinations of installers, file structures, nands, and even booting methods but nothing works, been at it for 3 obessively driven days.
I'm on a red wii with the d3-2 drive (probably) running 4.1U with a Verbatim 250gb portable hard drive and 2gb Sandisk SD card.

Any ideas? I'm all out of them :/

 

[cobleman]

Hi i need to know if i can bypass my Boot2 to start system menu like normal and just use a Bootmii loader to boot from cios instead of having to change the SD card every time i want to use Uneek + Di.
I know there is Switch but i would like to load it from a channel.
Can i change the SNEEK2 - EMUL.wad so it looks for 1bootmii folder? If so can i change it in a hex editor?

 

[jeffrey1790]

I still got either a black screen or a complete no-signal screen. I also tried using the original Sneek I
Any ideas? I'm all out of them :/

exact same problem. =\

 

[fraeggle]

Got the same problem. Using a clean Nand. After the installation is ready and i make a reboot, i only have a black screen.
If i use only Sneek (witout DI), i get the Welcome and press A..... Screen. After that i only have black screen.
Using the same on another wii (change settings.txt, delete shared2...) it works.
I don't have a glue why..........

 

[NReale3370]

I've been having that problem with UNEEK-DI since r140, 139 worked it was the change in the FS code to handle super paper mario and wii party that seems to have broken it for me. sneek-di still works fine though

 

[DarkMatterCore]

Just in case you don't know, r142 was released several hours ago.

 

[scooby74029]

yeah crediar is back!!!!


well I have a new release of Sneeky Compiler for anyone that wants it

here : http://www.mediafire.com/?94lqg08vb0pjt1w

i added the ability to configure my app to auto download and compile the latest revision of sneek
without prompt if you so choose in the config of sneeky compiler for the first time

hope this helps some of you out

 

[NReale3370]

Sadly still black screening with uneek-di 142

 

[GolfDude]

scoob, you are awesome, thanks to your auto installer, i have uneek+di working for the 1st time ever.. i never gotten uneek to work before, but thanks to your auto creation program, everything ran right and got it working for me!

 

[scooby74029]

@Golfdude

Glad to here that it worked for you

i am new to the whole programming thing so keep checkin back i am hoping to make it better

scooby74029

 

[GolfDude]

keep up the good work

 

[fraeggle]

Sadly still black screening with uneek-di 142

Me too, but if i use a copy from my real NAND it works right now.
It's crazy, i don't know why the Clean Nand is not working on this one.

to scooby: Great work..........

 

[scooby74029]

SneekyCompiler_SSE v1.0

get it here http://www.mediafire.com/?cyo8eg1rq3ke1jb

with my program you can download all programs needed for sneek/uneek compiling and compile automatically or choose the revision you would like to compile
also you can get Sneeky_Triiforce_MRC, Sneeky_mighty_channels, or the new Sneekflow
and just copy to sd or usb

the above wiiware/vc loaders are only for Uneek at this time and will only load wiiware/vc(because my programming skills are still poop)

thanks and hope this helps some of you out

scooby74029

 

[PizzaPino]

crediar seemed to fix the black boot issue. has anybody tested it yet (r144)? my drive is dead atm.

 

[NReale3370]

Just tested it. UNEEK-DI does indeed seem to work again! However the disc channel stays on insert disc, when I select a game from the list nothing happens

 

[PizzaPino]

mweh, so that problem still exists..

 

[dwmyke]

Deleting shared2 from the sd card and usb drive worked for uneek+DI. But yeah, nothing happens when trying to select a game.