Hacking SNEEK+DI quick guide

[tueidj]

SNEEK replaces ES, which controls what gets loaded. If something asks SNEEK's ES to load IOS9 (or anything

 

[thesund0g]

So would a stub suffice?

 

[XFlak]

good Q, I could easily put stub IOSs in place of all IOSs

 

[scooby74029]

new rev out r131

 

[tueidj]

good Q, I could easily put stub IOSs in place of all IOSs

 

[jhoff80]

Huh, so I was hoping Metroid Other M would work in SNEEK+DI for me by now, but still nothing. I wonder why I'm the only (or one of the few) one having issues with it still.

Oh well, I can still play that with the retail disc off my normal NAND.

 

[s3phir0th115]

I figure I should tell you guys, since it's not in the main guide.

If you want to disable the cheat menu, you gotta comment the following part in the main.c:

if( !SMenuFindOffsets( (void*)0x00000000, 0x01200000 ) )

Thanks go out to sk0ld on IRC for this information.

If you're wondering why this might be desirable, it's because the feature isn't done, or completely enabled, just yet, and it's currently breaking a few games, including Contra Rebirth from my testing.

 

[scooby74029]

new rev 133 out

 

[NReale3370]

Can someone confirm for me the Wii Party/Super Paper Mario fixes? I've been finding that SNEEK-DI works like a charm with both games but UNEEK-DI has issues (Super Paper Mario not starting and Wii Party saying can't read from disc at certain points). I tried to make a google code issue about it but it was labeled invalid for some reason

 

[SanGor]

crediar only updated the fatlib code in the DI part and not in the FS-USB code.

 

[sk0ld]

Since the home button menu showing up in captures has become an issue, the best way to use the screenshot feature is to press home, then press and hold home and it'll return to the game, then press 2.

 

[jefffisher]

has anyone gotten wiimc to run in sneek that's the only thing keeping me from using sneek permanently.

 

[Shepp]

whats it mean when your drive light stays illumintated? about every 10-15 minutes it'll flash 4 times then twice then once. Im not sure these are the normal error codes cause when ive gotten errors before my drive would constantly flash the error code not stay illuminated. any advice?

 

[Royusmc]

has anyone gotten wiimc to run in sneek that's the only thing keeping me from using sneek permanently.

Wiimc works for me in sneek. Just not sneek di or any uneek.

Dose anyone know when dios mios will be coming out. I would love to try it out. Thanks

 

[markehmus]

Royusmc

http://gbatemp.net/index.php?showtopic=236...p;#entry3192370

project has been 'scrap d'


-=-=-=-=-

i geuss skold likes to make a fool of me , (crediar too i supose, since he said he scrap'd it)

the 1 who donated (a few times) more then the price of a wode , then bought a second wode since i was lied to, spending more money.

but i was wrong dios mios was not scrap'd , i geuss it was some REAL FUNNY joke on me, eh skold ?

http://code.google.com/p/dios-mios/

yay now if i ever chose to donate again , i wont.... now evrytime i see sneek or dios mios i will be reminded of how skold like to rub shit in...(for what?) whats the point now , i never need dios mios , i donted to a guy i thought had a good idea and it seemed that even if it wasnt possible i would at least donate (again to something else crediar does), now i have nothing but regret of trying to support a guy who has a poor sence of humor.

too bad , so sad , im just a fool, eh skold, thanks and fu

 

[scooby74029]

sneek updated to r136

cheat menu activated explanation on sneek google code page wiki

 

[brausm08]

Here's my trouble....trying to play MPT via SNEEK+DI....

i used ModMii 4.3.4 (most current as of 10/23/10) to build a SNEEK nand and setup SNEEK+DI (uses SNEEK rev125 says the rev.txt in the SNEEK folder)....after the agonizing wait booting the wii the first time, i have it running. i can use the DI to make the disc channel recognize it from the HDD (the banner appears), but when i choose 'START' i get a perpetual black screen with loss of wiimote sync.

the SNEEK+DI setup i used is 4.2U with no additional channels (so i have only the disc channel). i would thus assume i have all the required IOSes needed to play the game....

the game is on a HDD formatted fat32 with 32kb cluster size. its a WD640 with a single partition. file structure is.... usb: games > R3ME01 > extracted ios files (files folder, sys folder, and 3 .bin files - extracted with DiscEX v0.5 - size is 7.20GB, so i'm thinking it's all there)....it's the only thing on the entire drive as of right now.... might be worth noting this dump worked (using the alt dol method) when it was on a WBFS partition prior to my restructuring into a fat32 setup.

the SD card I'm using is a Kingston 2GB...it's a bit slow, but it works....

what did i overlook?

edit: RESOLVED...see post by me below for details....in short: use SNEEK installer from the google code site and combine that with a NAND build from Modmii; don't rely on Modmii alone!

 

[NReale3370]

Here's my trouble....trying to play MPT via SNEEK+DI....

i used ModMii 4.3.4 (most current as of 10/23/10) to build a SNEEK nand and setup SNEEK+DI....after the agonizing wait booting the wii the first time, i have it running. i can use the DI to make the disc channel recognize it from the HDD (the banner appears), but when i choose 'START' i get a perpetual black screen with loss of wiimote sync.

the SNEEK+DI setup i used is 4.2U with no additional channels (so i have only the disc channel). i would thus assume i have all the required IOSes needed to play the game....

the game is on a HDD formatted fat32 with 32kb cluster size. its a WD640 with a single partition. file structure is.... usb: games > [R3ME01] > extracted ios files (files folder, sys folder, and 3 .bin files - extracted with DiscEX v0.5 - size is 7.20GB, so i'm thinking it's all there)....it's the only thing on the entire drive as of right now.... might be worth noting this dump worked (using the alt dol method) when it was on a WBFS partition prior to my restructuring into a fat32 setup.

the SD card I'm using is a Kingston 2GB...it's a bit slow, but it works....

what did i overlook?

Had this same issue, try shortening the folder name for the game. I have MPT and the ID6 of the game. Originally I had "Metroid Prime Trilogy "ID6 and that didn't work

 

[brausm08]

thanks for the reply....

i'm assuming you're not talking about the 'R3ME01' folder name (only the ID6...usb:\games\R3ME01\)....the DI menu reads the full 'METROID PRIME TRILOGY USA' or something like that when selecting the game....is that what you're referring to? if so, how can it be changed....

edit: just discovered the partition was not marked 'Active'...so i did that; but no dice, the problem persists.....

edit again: tried renaming it 'MPT R3ME01' suggested in prior post....no help....

last edit: downloaded SNEEKv2 from the google code site. wow has that changed a bunch from when i last tried SNEEK a long time ago.... used it to check my SNEEK build and it returned something like 'SNEEK setup for DI, but di.bin not found'...di.bin was present, but apparently corrupt or something..... used the SNEEK installer to build it with r140, and used the SNEEK and bootmi files with the NAND built from Modmii.... put it all together, let the wii do it's long first boot again...VIOLA!....works as it should.....

has anyone had luck using Modmii to build SNEEK+DI (or UNEEK+DI) for them???

 

[agentgamma]

I just got all the files onto my SD card and loaded my Wii. It hasn't done anything for about 5-10 minutes. Is this normal?
(If you can't tell already, I'm an absolute noob at this)