Have a switch that doesnt detect SD card. Only Hekate is able to boot but warns about 1-bit Card Mode. Nothing else works as probably nothing else supports this 1-bit SD Card mode (no OFW, no ATMO - cant start, no SD card, no SXOS)
I did search and found some topics regarding this:
1) Broken onboard connector - checked continuity to points, nothing broken, no missing pins visual, looks very pristine
2) Bad Card reader - tested four different readers from my donors. No go
3) Bad SD Card or format - tested 3 different cards 8,128,256 GB with Fat32, exFat - no go
Is there anything else hardware or software related to check ? Is there some other chip responsidle for SD card transfers on board which i need to replace from donor ?
Thanks for any help
I did search and found some topics regarding this:
1) Broken onboard connector - checked continuity to points, nothing broken, no missing pins visual, looks very pristine
2) Bad Card reader - tested four different readers from my donors. No go
3) Bad SD Card or format - tested 3 different cards 8,128,256 GB with Fat32, exFat - no go
Is there anything else hardware or software related to check ? Is there some other chip responsidle for SD card transfers on board which i need to replace from donor ?
Thanks for any help