1. wacko1201

    OP wacko1201 Newbie
    Newcomer

    Joined:
    Mar 5, 2017
    Messages:
    1
    Country:
    United States
    So I recently swapped the shells on my joycons with clear ones and after putting everything back together the right joycon will not connect to the switch in wireless mode. However, the joycon works perfectly fine when attached to the switch, aside from the switch taking around 10 seconds to recognize the joycon after turning on. When off of the switch, the joycon will not light up when pressing any buttons. The left joycon works without a problem

    Things I have tried:
    • Swapping the right and left joycon batteries. The right joycon battery works perfectly in the left joycon, but neither battery works in the right joycon
    • Disconnecting and reconnecting the joycon rail ribbon cables
    I don't know if the rail might be broken. I am hoping that others who have had this problem could possibly help. Thanks
     
  2. Winnppl

    Winnppl Member
    Newcomer

    Joined:
    May 4, 2020
    Messages:
    37
    Country:
    United States
  3. Manaboy

    Manaboy Member
    Newcomer

    Joined:
    Dec 18, 2017
    Messages:
    21
    Country:
    United Kingdom
    Try this with the joycons attached.

    1. Select System Settings from the Switch's Home screen.
    2. Select Controllers and Sensors from the menu.
    3. Select Disconnect Controllers. ...
    4. Attach a pair of Joy-Cons to the Switch console and hold the X button on the right Joy-Con until the controllers are disconnected.
     
  4. bahamaboom

    bahamaboom Newbie
    Newcomer

    Joined:
    Jul 23, 2020
    Messages:
    1
    Country:
    Bahamas, The
    There's a tiny 0 ohm resistor that's easily damaged while modifying the right joycon. Its just to the right of the battery connection socket. That would need to be replaced or bridged for full functionality to return.
     
  5. j31212y

    j31212y Newbie
    Newcomer

    Joined:
    Jun 23, 2020
    Messages:
    1
    Country:
    Indonesia
    can you show me the picture that resistor
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - properly, working, Joycon