Homebrew Problem with SafeCTRTransfer

[JustAharpy]

When I tried to boot via safehax it says "CTRTransfer not finished! No changes written to NAND check lower screen for info." but the lower screen shows nothing.

 

[proflayton123]

When I tried to boot via safehax it says "CTRTransfer not finished! No changes written to NAND check lower screen for info." but the lower screen shows nothing.

"

• If you get an error, ensure you have all files in the correct locations and that you have enough free space on your SD card as detailed in Get Started"

 

[Deleted User]

Redownload the CTRTransfer files, making 100% sure they are the correct ones for your device and region.
Also, if you have shitty/unstable internet, they might have just been corrupted while downloading. If this problem persists, keep redownloading them. Maybe try over ethernet or a different connection.

EDIT: What @proflayton123 said, too.

 

[JustAharpy]

"

• If you get an error, ensure you have all files in the correct locations and that you have enough free space on your SD card as detailed in Get Started"

with or without the 2.1.0 image?

 

[proflayton123]

with or without the 2.1.0 image?

I'd imagine with also because it contains space, what gb is your sd card? Also check it's not faulty/corrupted

 

[arc13]

with or without the 2.1.0 image?

A 4GB SD card should be enough to complete the guide.

 

[Deleted User]

with or without the 2.1.0 image?

With, I'm assuming. If you have to ask that, you probably just need a bigger SD card. Find one/get one. Also, check to see if it's corrupted.
EDIT: Ninja'd again ;-;

 

[JustAharpy]

With, I'm assuming. If you have tTTo ask that, you probably just need a bigger SD card. Find one/get one. Also, check to see if it's corrupted.
EDIT: Ninja'd again ;-;

Thanks