Homebrew possible ARM11 kernel hack on 10.5

[LarBob]

On my o3ds, it can take multiple tries, definitely doesn't always work first time. That being said, it doesn't seem like the hax is working for n3ds yet. Hopefully soon (TM)

 

[punderino]

Using the pagedump, will I only get one file over and over? Or can I get others? I'll downgrade and grab the others if needed.

 

[astronautlevel]

Using the pagedump, will I only get one file over and over? Or can I get others? I'll downgrade and grab the others if needed.

Assuming you have CFW it shouldn't matter what version you're on, you can switch the firmware file that you're using.

 

[aliaspider]

Using the pagedump, will I only get one file over and over? Or can I get others? I'll downgrade and grab the others if needed.

you don't need to downgrade for that, some cfw allow changing the firmware.bin

 

[punderino]

https://drive.google.com/file/d/0B390u0mt1F4CRGJFZGp4NUY3STg/view?usp=sharing
tp_NEW_0x02320900.bin

--------------------- MERGED ---------------------------

I'm using AuReiNand, so I should jump around and use 9.0 FIRM then 10.4 FIRM and so on?

 

[daxtsu]

another try since some dumps seemed to have different offsets than others, don't get your hopes up much though ^^

Tried 5 times on my N3DS 10.6 emuNAND (Native firm's from 10.2, not 10.4), none of them worked (they all froze and didn't say success or the kernel version).

 

[astronautlevel]

Wish I could contribute, but I only have a 9.2 o3DS with 10.6 emuNAND, which has already been confirmed to work. My friend has a 10.6 N3DS, so ill see if i can borrow it, if a .3dsx version becomes available.

You can grab the offsets using the pagedump if you are willing to switch around the firmware for your CFW. As stated earlier, you don't need to downgrade, some CFW supports switching what firmware file you're using. Refer to the OP to find which offsets are still needed.

 

[Bedel]

10 times in emunand 10.6 and nothing, but 1 time in sysnand 9.2 and worked.

 

[Rhapsody]

https://transfer.sh/u4lco/sysupdater-10-4.zip Courtesy of flagrama. Might brick your device, yada yada yada. If it doesn't work support hasn't been added for your device yet, or you need to retry.

O3DS works 10.4+, N3DS might not work yet. Maybe it will. I don't know.

 

[astronautlevel]

10 times in emunand 10.6 and nothing, but 1 time in sysnand 9.2 and worked.

Perhaps the offsets for 10.6 n3ds need to be gotten again

 

[LarBob]

10 times in emunand 10.6 and nothing, but 1 time in sysnand 9.2 and worked.

it could just be a very low success rate

 

[punderino]

https://transfer.sh/u4lco/sysupdater-10-4.zip Courtesy of flagrama. Might brick your device, yada yada yada. If it doesn't work support hasn't been added for your device yet, or you need to retry.

I'll give it a try on a sysNAND with a9lh. Let's do this!

 

[astronautlevel]

https://transfer.sh/u4lco/sysupdater-10-4.zip Courtesy of flagrama. Might brick your device, yada yada yada. If it doesn't work support hasn't been added for your device yet, or you need to retry.

Thank you based flagrama. I'll try this on my 10.6 o3ds emunand later.

 

[Deleted member 384851]

Confirmed working. Downgraded my limited edition Zelda O3DS 10.6 to 9.2 without a brick.

 

[iAqua]

Confirmed working. Downgraded my limited edition Zelda O3DS 10.6 to 9.2 without a brick.

Picture?

 

[LarBob]

Confirmed working. Downgraded my limited edition Zelda O3DS 10.6 to 9.2 without a brick.

pictures? nice by the way

 

[Rhapsody]

Confirmed working. Downgraded my limited edition Zelda O3DS 10.6 to 9.2 without a brick.

What, the version I linked or a different one? That was fast.

 

[aliaspider]

10 times in emunand 10.6 and nothing, but 1 time in sysnand 9.2 and worked.

9.2 and lower will always work now since it now uses memchunkhax1 there.

 

[Bedel]

Confirmed working. Downgraded my limited edition Zelda O3DS 10.6 to 9.2 without a brick.

Still not a sysupdater, so... WTF

 

[Bedel]

9.2 and lower will always work now since it uses memchunkhax1 there.

Oh, okay... Well, that goes nothing