Hacking PLZ HELP WAD-BRICK????

[wii94]

PLZ can someone help me my friend has a wad-brick and he can't use the "WAD Manager Autoboot Disc Iso" because he has 3.3e.
PLZ HELP!!

 

[Kadji]

There is nothing your friend can do, except one thing which I by myself have not tried out.

If your Friend still has a twilight Hack Copy on his Wii (the newest version) you could try and create an autoboot Zelda Twilight Princes disc, since this modification does not rely on the Trucha Bug which was fixed in 3.3

Once Zelda starts load your twilight hack and boot the wad unistaller from your SD Card.
And since you are german and i am not sure if you 100% understood what i wrote here is the same thing in german:

Es gibt nichts was du tun kannst ausser einer sache die eventuel funktionieren könnte:

Wenn dein Freund noch eine Twilight Hack Speicherrung (die neuste version) auf dem Wii hat könnt ihr versuchen eine Zelda Twilight Princess Autoboot-DVD zu erstellen, da die modifikationen die man hierfür an der ISO vornehmen muss nicht den Trucha Signer bug benutzen, welcher in der 3.3 Firmware gefixt wurde.

Wenn Zelda startet führt den Twilight Hack aus und bootet den WAD Unistaller von der SD Card.
Hoffe das ich helfen konnte.

 

[wii94]

thanks, but how i can make a Autoboot-DVD?
danke, aber wie kann man eine Autoboot-DVD erstellen?

 

[Fatghost28]

You can make autoboot ISOs with Wii BootMe.

You can get it here: http://wiibrew.org/wiki/Wii_BootMe

 

[wii94]

You can make autoboot ISOs with Wii BootMe.

You can get it here: http://wiibrew.org/wiki/Wii_BootMe

thanks, but how can i make it can someone give me a tutorial or something else???

 

[skawo96]

You can make autoboot ISOs with Wii BootMe.

You can get it here: http://wiibrew.org/wiki/Wii_BootMe

thanks, but how can i make it can someone give me a tutorial or something else???

Start -> Run -> cmd
Browse to folder with this app (like d and have a iso there
then type ./Bootme xxx.iso m

 

[wii94]

I don't understand that pleas can someone make me a auto boot disk PLZ?????

 

[skawo96]

Of Zelda TP?

How could I upload for you 4GB?
1. Place iso of Zelda TP in one of partitions (for example c
3. Place the BootMe in the same partition
4. START -> Run
5. Type "cmd"
6. Type name of partition you have the iso and the app (ie. C
7. Then type: (i.e) C:/Bootme m
8. Press ENTER

 

[wii94]

Of Zelda TP?

How could I upload for you 4GB?
1. Place iso of Zelda TP in one of partitions (for example c
3. Place the BootMe in the same partition
4. START -> Run
5. Type "cmd"
6. Type name of partition you have the iso and the app (ie. C
7. Then type: (i.e) C:/Bootme m
8. Press ENTER

ok thanks, I try this out, but first I musst download zelda^^

 

[grimmyx]

The whole point of this was you having the Twilight hack on your system. Do you even have that on there?

 

[wii94]

The whole point of this was you having the Twilight hack on your system. Do you even have that on there?

yes my friend has the TP hack on his Wii.

 

[wii94]

Of Zelda TP?

How could I upload for you 4GB?
1. Place iso of Zelda TP in one of partitions (for example c
3. Place the BootMe in the same partition
4. START -> Run
5. Type "cmd"
6. Type name of partition you have the iso and the app (ie. C
7. Then type: (i.e) C:/Bootme m
8. Press ENTER

It didn't work

,have someone a nother Idee??? PLZ help???

 

[Diablo1123]

What part didn;'t work?

 

[Hellmonkeys]

This is all right except for the following part:

7. Then type: (i.e) C:/Bootme m

The correct syntax is ./BootMe zelda.iso a

The M makes the disc manual boot (via. the disc channel) again, rather than the autoboot that this person needs. So, patch your ISO again but use a instead of m, then it *should* boot as soon as you put the disc in and start up your Wii.

 

[wii94]

This is all right except for the following part:

7. Then type: (i.e) C:/Bootme m

The correct syntax is ./BootMe zelda.iso a

The M makes the disc manual boot (via. the disc channel) again, rather than the autoboot that this person needs. So, patch your ISO again but use a instead of m, then it *should* boot as soon as you put the disc in and start up your Wii.

I also make it with a but it doesn't work.

 

[nBrew]

Step 7 is wrong:

7. Then type: (i.e) C:/Bootme a

the m (manual) needs to be a (auto) as far as the manual explains.

So..try it

 

[wii94]

I also try it with a but it doesn't work PLZ HELP?????

 

[skawo96]

sorry about that m, I was just guessing how it works, 'cause I wasn't using this app before. Wait, I'll try to get it working, and tell you what.
Okay.

Do that:
name the iso "wiigame.iso"
You have to make a space between your partition name and BootMe, so:

C:\> BootMe wiigame.iso a

 

[wii94]

sorry about that m, I was just guessing how it works, 'cause I wasn't using this app before. Wait, I'll try to get it working, and tell you what.
Okay.

Do that:
name the iso "wiigame.iso"
You have to make a space between your partition name and BootMe, so:

C:\> BootMe wiigame.iso a

he makes the auto boot disc, but it doesn't work:

QUOTEC:\Dokumente und Einstellungen\killer\Desktop>Bootme.exe wiigame.iso a


BootMe 1.0 by CorteX
Greetings fly out to crediar, bushing, segher, and everyone else contributing in
some way

Operation completed successfully.
C:\Dokumente und Einstellungen\killer\Desktop>

I think it doesn't work because he has 3.3e and with 3.3e the wii can't load trucha signed games.

have some one another idee?????

 

[skawo96]

But making iso autobootable doesn't trucha sign it.