ROM Hack RELEASE Outer Worlds Graphics and FPS Mods

[NotACat]

lol this game is a lost cause it was never meant to be ported to the switch. all the hacking and mods in the world ain't going to make this game better!

This port is ok compare to Ark Survival Evolved...

 

[Loonelywolf]

I want the same to...i wanto to disable shadows,vegetation and another stuff...just increase the sharpness...cause to much stuff to load will make the game lose fps...but when i edit the settings the game crashes on start up...

 

[NotACat]

HANDHELD MODE (Only 460MHZ GPU OC) after some tweaks and enable FXAA instead of TAA

 

[burhansalih]

View attachment 212445
HANDHELD MODE (Only 460MHZ GPU OC) after some tweaks and enable FXAA instead of TAA

Cant decide if i should use the sharphess 1 from the original post or this? both look good.

 

[DemetriusBlack]

Cant decide if i should use the sharphess 1 from the original post or this? both look good.

From what I can see he has also set the sharpness to 1 and raised the minimum resolution for handheld to 65 so if you like the look you can use his instead.

 

[Joshmas]

View attachment 212445
HANDHELD MODE (Only 460MHZ GPU OC) after some tweaks and enable FXAA instead of TAA

this makes it so much nicer to play, only thing is when talking to characters there isn’t anymore dof effects. Can this be sorted at all?

 

[Cencil]

this makes it so much nicer to play, only thing is when talking to characters there isn’t anymore dof effects. Can this be sorted at all?

Yeah same here, it doesn't look like this one has any of the added effects from the original post. Just minimum dynamic res to 65% and FXAA enabled

 

[DemetriusBlack]

Yeah same here, it doesn't look like this one has any of the added effects from the original post. Just minimum dynamic res to 65% and FXAA enabled

Here's FXAA + the added effects from the main config and sharpness 1

 

[Cencil]

Here's FXAA + the added effects from the main config and sharpness 1

You're the man!

 

[NotACat]

Yeah same here, it doesn't look like this one has any of the added effects from the original post. Just minimum dynamic res to 65% and FXAA enabled

I turned down some settings but it still have many settings from the default one (and it's much more than just vanilla settings+FXAA if you can compare) - and the performance still bad in some areas and heavy fights so I need the vanilla file to compare

Here's FXAA + the added effects from the main config and sharpness 1

Do you have the vanilla pak?

 

[Maverick81PL]

Hi, can someone make this for Borderlands games on Switch? Better detail in world (grass) and enable AA in game?

 

[jnl1]

Here's FXAA + the added effects from the main config and sharpness 1

So this works good with 460 MHZ GPU?

 

[Loonelywolf]

Ok...can you trie with shadows off,vegetation off and sharpness the same?
Do you edit the file with text editor?
Cause mine always crashes when i make some changes...

 

[Loonelywolf]

Did anyone played without the day one patch?

 

[burhansalih]

Here's FXAA + the added effects from the main config and sharpness 1

Legend thank you

--------------------- MERGED ---------------------------

Is it just me or sometimes when I apply these I lose the ability to click the left stick to sprint... I have to delete my save and start a new game then the sprint works.... strange eh?

 

[Clausioporosis]

So this works good with 460 MHZ GPU?

Nope, not really.
I get about 20 - 25 fps average with 460mhz when things get busy (fights with some enemies/town) and docked
about 13 - rarely 25 fps. Portable plays pretty fine with 614mhz but docked is a lost cause most of the time with those settings,
even with 921mhz.

ECLIPSE00074 has updated his config to 1.1v:

" Updating the config to version 1.1 : 06/07/20
- Translucent Lighting Volume turned on
- Slightly reduced the quality of the dimming (but it seems that this did not affect the performance or quality)
- Tonemapper quality was reduced to the standard value
- The quality of the materials has been reduced to the standard value (it seems that it didn’t work)
- The quality of the effects has been reduced to the standard value "

Here are the configs, one is the original, the other without TAA. I tried to change the sharpness to 1, but it crashes
for whatever reason.

Another thing I dont understand is FXAA. TAA and FXAA are different antialiasing methods, aren't they? So is it automaticly
activated when disabling TAA because I didn't find any FXAA settings in the config. The only difference I saw in the "FXAA-Config"
from unnamed124 was that TAA is disabled und minResolution higher.

 

[ErvinGarcia1122]

im new, i dont know how to install it? can someone help me?

 

[ecl0674]

I didn't find any FXAA settings in the config

Because AA controls a "r. PostProcessAAQuality"
0 = No AA, 1 and 2 = FXAA, 3, 4, 6 = TAA
You need to better learn a UE4

 

[ErvinGarcia1122]

k

 

[DemetriusBlack]

Nope, not really.
I get about 20 - 25 fps average with 460mhz when things get busy (fights with some enemies/town) and docked
about 13 - rarely 25 fps. Portable plays pretty fine with 614mhz but docked is a lost cause most of the time with those settings,
even with 921mhz.

ECLIPSE00074 has updated his config to 1.1v:

" Updating the config to version 1.1 : 06/07/20
- Translucent Lighting Volume turned on
- Slightly reduced the quality of the dimming (but it seems that this did not affect the performance or quality)
- Tonemapper quality was reduced to the standard value
- The quality of the materials has been reduced to the standard value (it seems that it didn’t work)
- The quality of the effects has been reduced to the standard value "

Here are the configs, one is the original, the other without TAA. I tried to change the sharpness to 1, but it crashes
for whatever reason.

Another thing I dont understand is FXAA. TAA and FXAA are different antialiasing methods, aren't they? So is it automaticly
activated when disabling TAA because I didn't find any FXAA settings in the config. The only difference I saw in the "FXAA-Config"
from unnamed124 was that TAA is disabled und minResolution higher.

Thanks for notifying me about the update, I've updated the original post.

 

[Clausioporosis]

Because AA controls a "r. PostProcessAAQuality"
0 = No AA, 1 and 2 = FXAA, 3, 4, 6 = TAA
You need to better learn a UE4

Thanks for the info haha, but for real I'm not interested in
learning UE4.

 

[StegAadd]

How to install it btw

 

[Benja81]

How to install it btw

--------------------- MERGED ---------------------------

Damn, i pressed “send” button too much

Lol I did that once.

To install just drop the "0100626011656000" folder into atmosphere/contents folder or if using reinx, in the reinx/titles folder etc.