Hacking old3dsXL hardmod help

[Fikiy]

Hello! So I am hardmoding my o3dsXL and after welding everything and getting the BootROM error 8046 and the 00000400, when I plugged my 3ds to the SDCard Reader which is one of the recommended one to use (A trascend) all was going well. I started to write my NAND backup but when it reached to 50-60% an error 21 showed up. So I followed the instructions from the tutorial I was using and I tried to write the NAND again using a different port, but after I retired my Trascend SDcard Adapter and plug it againg into my pc it no longer reads anything. Any help pls?? thx

 

[Fikiy]

anyone help??

 

[vb_encryption_vb]

Bad soldering.

 

[Fikiy]

Bad soldering.

Then why the first time worked?? Im gonna try to sold everything again, Ill report back

 

[vb_encryption_vb]

dumb luck

 

[Fikiy]

All is well sold, I have checked and I have done it twice now, the sold is clean, any other ideas??

 

[vb_encryption_vb]

Soldering on the sd card.

 

[Fikiy]

I have done that too, I even used a new sd card. I retty sure that the problem is not the soldering, I have experience on soldering and Im pretty sure that the sold is ok, anyway thx for ur help. Any other ideas?? Maybe the adapter is not reading the SD card the way it has to be readed?

 

[Fikiy]

Anyone??

 

[vb_encryption_vb]

Use a different sd adapter, o3ds xl can be read by just about everything.

 

[Fikiy]

I used multimeter and everything is ok, Im gonna try with a different sd card and also with other adapter, thx for ur help guys, Ill report back if it works now