I have followed all of the directions, but my ofw and cfw are the same. I load into them separately from hekate. Cfw 17.0.1 AMS Ofw 17.0. Profile and Games show on both also. Even tinfoil installs on ofw side. Please help.
Can you share us your hekate config?I have followed all of the directions, but my ofw and cfw are the same. I load into them separately from hekate. Cfw 17.0.1 AMS Ofw 17.0. Profile and Games show on both also. Even tinfoil installs on ofw side. Please help.
I have followed all of the directions
What directions did you follow? It sounds like you either didn't create an emuMMC or that your ini is set to boot to CFW (sysMMC) and stock, instead of CFW (emuMMC) and stock. I recommend stating what directions you followed and posting your hekate ini file as another user suggested.
Here is my configuration. It works on my other switch, but not on this one.Can you share us your hekate config?
What directions did you follow? It sounds like you either didn't create an emuMMC or that your ini is set to boot to CFW (sysMMC) and stock, instead of CFW (emuMMC) and stock. I recommend stating what directions you followed and posting your hekate ini file as another user suggested.
Here is my configuration. It works on my other switch, but not on this one.
Post automatically merged:
Put files to root of sd. Create partition. Create emuMMC.
Here is my configuration. It works on my other switch, but not on this one.
Post automatically merged:
Put files to root of sd. Create partition. Create emuMMC.
The ini looks okay. As far as which directions you used, I meant what guide did you use to mod your Switch? Rentry, NH, or some YouTube video or AIO pack? Also, was the emuMMC created when the Switch already had a bunch of games on it and with your profile set up? If so, naturally the emuMMC is going to appear to be the same as the sysMMC. Do as Hayato said, look in system settings at your FW version to see if one has and E and the other has an S. If so, you should be good to go.
The ini looks okay. As far as which directions you used, I meant what guide did you use to mod your Switch? Rentry, NH, or some YouTube video or AIO pack? Also, was the emuMMC created when the Switch already had a bunch of games on it and with your profile set up? If so, naturally the emuMMC is going to appear to be the same as the sysMMC. Do as Hayato said, look in system settings at your FW version to see if one has and E and the other has an S. If so, you should be good to go.
I used a YouTube video. Got the files from github. It worked on my old switch. I thought it was weird when I booted up. And all of my games and profile were Already loaded.
Post automatically merged:
Is there a way to wipe the switch And start over?
Before starting over, boot into "Atmosphere" from your Hekate menu. Now select the cog wheel on the home screen and then to System on the left hand side. On the top it lists your FW. Is there an E or an S after the FW version? Now do the same after booting into "Stock".
If I check the system from where it tells me It's ready for an update. I know not to update to 18. I will try again using one of the guides that you provided later tonight after work.
If I check the system from where it tells me It's ready for an update. I know not to update to 18. I will try again using one of the guides that you provided later tonight after work.
1) Enable Airplane Mode on both "Atmosphere" and "Stock"
2) Disable Auto-RCM if enabled
3) Completely power down the Switch
4) While holding the volume button down (both - & +), press and hold the power button
5) Let go of the power button once the Nintendo logo appears, but keep holding the volume button until the Maintenance Mode screen appears
6) Let go of the volume button once the Maintenance Mode screen appears, then press the power button to power off the Switch
7) You can now re-enable Auto-RCM if it was previously enabled
That pending update will now be gone on the next reboot and it will now correctly show your FW version (and the E or S). Try again after clearing the update and post back. Remember to turn airplane mode on first so it doesn't redownload the update.
1) Enable Airplane Mode on both "Atmosphere" and "Stock"
2) Disable Auto-RCM if enabled
3) Completely power down the Switch
4) While holding the volume button down (both - & +), press and hold the power button
5) Let go of the power button once the Nintendo logo appears, but keep holding the volume button until the Maintenance Mode screen appears
6) Let go of the volume button once the Maintenance Mode screen appears, then press the power button to power off the Switch
7) You can now re-enable Auto-RCM if it was previously enabled
That pending update will now be gone on the next reboot and it will now correctly show your FW version (and the E or S). Try again after clearing the update and post back. Remember to turn airplane mode on first so it doesn't redownload the update.
Thanks... I'll try this as soon as I get home.
There is an S after the firmware. 17.0.1 Ams 1.6.2!s
It says that for both "Atmosphere" and "Stock"? I would then suggest you go ahead with wiping the sd card & starting over with one of the guides mentioned. It really doesn't take too long and since you've done some of it before it should be a breeze for the most part.
It works correctly now. Thanks guysI will do tomorrow. It's weird because I've done the process with other switches with no problem. But when I do the exact same process with my current switch I get the same result.