Homebrew RELEASE NxFileViewer

[BigOnYa]

I already tried that and also this one before posting:
https://vps.suchmeme.nl/git/mudkip/Lockpick_RCM/releases

There is a spot in the app for prod.keys, title keys, and console.keys. Those apps put out two of those three files... but not a console.keys file. Trying to use either of the other two, or the dev.keys file files in the apps section for console.keys results in errors. LockPick does not provide the proper console.keys file for use in the app. So again I'm asking how the proper file is attained, even if it doesn't matter and is not even necessary. It's a leaning thing mor ethan anything else. I just enjoy knowing.

Don't put anything in that Console keys option. Works fine with the other Two only.

 

[RedColoredStars]

Don't put anything in that Console keys option. Works fine with the other Two only.

Was editing my post when you replied. I know I don't need that file and the app works fine without it. I just enjoy learning. How is the correct console.keys file obtained to begin with?

 

[BigOnYa]

Was editing my post when you replied. I know I don't need that file and the app works fine without it. I just enjoy learning. How is the correct console.keys file obtained to begin with?

Not sure, never needed or tried to get really. But read here: https://github.com/Thealexbarney/LibHac/blob/master/KEYS.md

 

[RedColoredStars]

Not sure, never needed or tried to get really. But read here: https://github.com/Thealexbarney/LibHac/blob/master/KEYS.md

I read it and I for the most part understand what the console.keys file is, but still not how to obtain it. There's most likely a reason that info is not really provided anywhere. Thanks for trying to help out. Appreciated. I'll just put it out of my head despite my "need to know".

 

[Deshi]

but still not how to obtain it.

really... I'm a genius...

 

[RedColoredStars]

really... I'm a genius...

Except you're not. 100% positive you didn't read the entire conversation because it's been stated very clearly that Lockpick does not put out a console.keys file. Only dev.keys, prod.keys, and title.keys. None of those three work for use in NxFileViewer's console.keys section.

​

 

[Deshi]

Except you're not. 100% positive you didn't read the entire conversation because it's been stated very clearly that Lockpick does not put out a console.keys file. Only dev.keys, prod.keys, and title.keys. None of those three work for use in NxFileViewer's console.keys section.

​

There are no other keys files than these 3...
In there, you have to enter the path for each.

Why dev.keys is renamed console.keys ? The dev may give an explanation...
SAK and NSC_Builder for example look for a file named "keys.txt" to work; but it is not a "new" file with keys just a renaming of the file.

There
https://github.com/Thealexbarney/LibHac/blob/master/KEYS.md
dev.keys and console.keys are said to be optional files so you should get it to work without them.
You also have "This template is for console-unique keys." and all the labels listed in "Console-unique keys"

Spoiler: what you need

secure_boot_key
tsec_key
device_key
bis_key_00
bis_key_01
bis_key_02
bis_key_03
save_mac_key_00
save_mac_key_01

keyblob_key_##
keyblob_mac_key_##
encrypted_keyblob_##

sd_seed
save_mac_sd_card_key

eticket_rsa_keypair

So now it's time for a nice text editor and copy paste from dumped keys what you need in file "console.keys".

Anyway, you're right, nice read, good luck to you !

 

[RedColoredStars]

There are no other keys files than these 3...
In there, you have to enter the path for each.
View attachment 409434
Why dev.keys is renamed console.keys ? The dev may give an explanation...
SAK and NSC_Builder for example look for a file named "keys.txt" to work; but it is not a "new" file with keys just a renaming of the file.

There
https://github.com/Thealexbarney/LibHac/blob/master/KEYS.md
dev.keys and console.keys are said to be optional files so you should get it to work without them.
You also have "This template is for console-unique keys." and all the labels listed in "Console-unique keys"

Spoiler: what you need

secure_boot_key
tsec_key
device_key
bis_key_00
bis_key_01
bis_key_02
bis_key_03
save_mac_key_00
save_mac_key_01

keyblob_key_##
keyblob_mac_key_##
encrypted_keyblob_##

sd_seed
save_mac_sd_card_key

eticket_rsa_keypair

So now it's time for a nice text editor and copy paste from dumped keys what you need in file "console.keys".

Anyway, you're right, nice read, good luck to you !

I already knew where in the app to set the locations as was stated in my prior comments. However, they don't need to be set if you have them in the same folder as NXFileViewer. The page you linked to was also already discussed. A bit poor documentation there (imo), as some of the info needed for the console.keys templates are either not included in either the dev.keys or prod.keys files... or it is is worded differently so a person isn't sure what to use.

I don't care anymore. lol. Thank you for offering your assistance.

Post automatically merged: Dec 20, 2023

This is a weird one. Can someone with a known good copy of Bayonetta 3 see if it's the same? I noticed this because NSC_Builder was reporting the following on the nsp:

DECRYPTION TEST
***************
01004A4010FEA000 - Content.META
79309e10d24e1d0d74579d7f5b2ecfb5.cnmt.nca -> is CORRECT
01004A4010FEA000 - Content.PROGRAM
Exception: read returned empty 0x37325c000

I opened the file in NX File viewer and while the sig and hash are both valid, there are hash errors in the "Content" tab for (Program) Sections 0 and 1 as seen in the pic. Notice those two sections have a little red exclamation next to them as well. The error for both is the same and says: "Failed to open content of NCA section «0»: ResultFsNonRealDataVerificationFailed (2002-4604): Hash error!"

 

[RedColoredStars]

@MysterTee Can you update the app to use NET 8? NET 7 has reached end of support, while NET 8 support is until November 2026.

Also, the messages when starting the app for example:

Failed to match key device_key_4x
Failed to match key eticket_rsa_kek_source
Failed to match key eticket_rsa_kekek_source
Failed to match key save_mac_key
Failed to match key ssl_rsa_kek_source
Failed to match key ssl_rsa_kekek_source
Failed to match key ssl_rsa_key

I believe this is worded poorly. They are just extra entries in prod.keys that are not needed. Perhaps change "Failed to match key" to "Redundant key". That makes much more sense.

Cheers and thanks for the app.

​

 

[nomai]

I tried to rename a game and the corresponding update and i get the next error:

• [SIMULATION] «Name [xxxxxxxxxxxxxxxx][v0][US].nsp»Renaming failed: The SSL connection could not be established, see inner exception.
• [SIMULATION] «Name [xxxxxxxxxxxxxxxx][v131072][US].nsp»Renaming failed: The SSL connection could not be established, see inner exception.

What I am doing wrong?
Any help wold be appreciated.

 

[MysterTee]

I tried to rename a game and the corresponding update and i get the next error:

• [SIMULATION] «Name [xxxxxxxxxxxxxxxx][v0][US].nsp»Renaming failed: The SSL connection could not be established, see inner exception.
• [SIMULATION] «Name [xxxxxxxxxxxxxxxx][v131072][US].nsp»Renaming failed: The SSL connection could not be established, see inner exception.

What I am doing wrong?
Any help wold be appreciated.

Do you still have the issue? It seems to be related to HTTPS certificate of tinfoil.io.

 

[nomai]

Still the same issue, yes. But I don't know what to do.

 

[satel]

Package information & Presentation in Overview always blank.

Is there an alternative app that shows the file image?

 

[rd2k3]

renaming error in all games since 17/oct



• «Dreamcutter [010038701CD36000][v0] (1.12 GB).nsp»Renaming failed: Response status code does not indicate success: 521 (<none>).
• «Dreamcutter [010038701CD36800][v65536] (0.04 GB).nsp»Renaming failed: Response status code does not indicate success: 521 (<none>).
• «Lumo 2 [01000C40236A8000][v0][] (1).nsp»Renaming failed: Response status code does not indicate success: 521 (<none>).

 

[OrGoN3]

renaming error in all games since 17/oct



• «Dreamcutter [010038701CD36000][v0] (1.12 GB).nsp»Renaming failed: Response status code does not indicate success: 521 (<none>).
• «Dreamcutter [010038701CD36800][v65536] (0.04 GB).nsp»Renaming failed: Response status code does not indicate success: 521 (<none>).
• «Lumo 2 [01000C40236A8000][v0][] (1).nsp»Renaming failed: Response status code does not indicate success: 521 (<none>).

Because the repo it uses it hosted on tinfoil's website and that website is currently down.

Try using the .media repo.

 

[rd2k3]

Because the repo it uses it hosted on tinfoil's website and that website is currently down.

Try using the .media repo.

thanks, but currently it is already a .media repo (in options, settings)

i notice that in NxFileViewer.settings.json there TitlePageUrl (online) and TitleInfoApiUrl (api url dont work)

 

[OrGoN3]

thanks, but currently it is already a .media repo (in options, settings)

In fact, this current one is not offline, so I don't understand why the error


i notice that in NxFileViewer.settings.json there TitlePageUrl and TitleInfoApiUrl (api url dont work)

Sorry. But yeah, 521 means web server is down. Same as the main site. So perhaps all the main resources are down.