NTRBoot Released!

It's here!
ntrboot_checklist_2.png

Info

@Normmatt has created a way to run B9S .firm files from bootrom via a DSi Flashcard and a magnet! This works on every 3DS on any firmware version.

For installation without a PC, user @TheCyberQuake has created a pack which will automatically install B9S and copy over essential starter homebrew from the flashcard's SD to the 3DS's. This will mainly be used for PC-less B9S installations. If you have a PC with you, use 3ds.guide. Read more here: https://gbatemp.net/threads/481141/

How does this work?

This works because of a flaw in the bootrom. Before the bootrom boots the NAND, it checks to see if Start+Select+X is held down, and if the shell is closed. If these requirements are met, it will boot an NDS cartridge from the bootrom. This give that cartridge bootrom access. You might be wondering how you'd hold down buttons while the shell is closed, and why you need a magnet. If you put a magnet in a specific spot on the 3DS, it will go into sleep mode. Using this, you can boot the NDS cartridge with the buttons held down while in sleep mode! Using a reflashable flashcard, you can boot B9SInstaller using the flashcard, and easily install it on your 3DS.
The 2DS doesn't need a magnet since a switch puts it to sleep instead of a magnet.

What does this mean?

  1. Any 3DS model on any firmware can be hacked with minimal effort
  2. You can unbrick any 3DS model from any type of brick.
    - Remember, you don't need a NAND backup for this. Just do a CTRTransfer.
    - This does not apply to MCU bricks.
  3. Even consoles with fried NAND, or even the NAND chip physically removed, can use this
This is incredibly impressive stuff, and will most likely be released soon! edit: now!

FAQ

Q: Can Nintendo patch this?
A: Nope! Not without a new hardware revision.

Q: My flashcard is blocked by my firmware! Can I still use this?
A: Yes! The flashcard blacklist is not enabled on the bootrom.

Q: Why can't this work with my flashcard?
A: The installation requires you to flash NTRBoot to the flashcard's nand. Most DS flashcards, such as the original R4, have a ROM, which is not flashable.

Q: Can I install NTRBoot on my flashcard without another 3DS system?
A: If you can run NDS roms on your 3DS with it, then yes. If it's blocked on your 3DS version, then you'll need another 3DS system to use it.

Q: Will my 3DS flashcard work?
A: No, only the NDSi flashcards listed above.

Q: Will any other flash cards work?
A: Only the ones listed in the OP. However keep in mind that flashcards such as the DSTT, Supercard DS2 and R4 SDHC Dualcore are planned to be supported in the future.

Q: I tried to do this with my cartridge and it didn't work?
A: It doesn't work with regular DS cards.

Q: Can I unbrick from a ____ brick?
A: Considering the card has access to the bootrom, yes! This can unbrick any brick (except MCU), unless you've taken a knife to the motherboard.

Q: Can I install B9S on the latest firmware with this?
A: Again, since the card has access to the bootrom, you can do this easily! Just plug in your flashcard, boot up using the magnet and button combination, and install.

Q: Does this work on the New Nintendo 2DS XL?
A: Yes!

:arrow: Release
:arrow: Guide
:arrow: Free NTRBoot Flashing
:arrow: Free B9S Installations

Here is SciresM's post about this

Please see SciresM's presentation on bootromhax.
 
Last edited by Deleted member 381889,

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country
of the two, which is the better card if you're buying it?
Depends, I prefer the AK2i, because I have a DSlite to install NTRboot and can use with it install as a normal flashcart. The R4 however, can be used for with only a 3DS, but it has to be restored to be used as a flashcart again.
 

hopkins

Member
Newcomer
Joined
Jan 8, 2015
Messages
11
Trophies
0
Age
44
XP
114
Country
Netherlands
Well, i've bought for parts a bricked new 3ds xl.
Got myself an compatible acekard 2i and prepared it well.

As all my other 3dses react correctly with this setup and everything boots fine, this bricked one unit does not.
It just tries to load exploit after the button combination and then immediately shuts itself off. When trying to turn it on regularly it stucks on blue power led on forever, no screen light or any other reactions. SD in it or w/out it makes no difference. Dunno what happened to it before i got it but hardmod didn't do the trick (correct reader, but blue screen popped for one second and then it turns itself off so no dump or injecting).

I'm not into any cfw or modding, retail user, so my knowledge about scene and posibilities for fixing it are minimal.
So there's only one question from me here - is this motherboard fixable? Any tips or any help here? Thanks! :)
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
Well, i've bought for parts a bricked new 3ds xl.
Got myself an compatible acekard 2i and prepared it well.

As all my other 3dses react correctly with this setup and everything boots fine, this bricked one unit does not.
It just tries to load exploit after the button combination and then immediately shuts itself off. When trying to turn it on regularly it stucks on blue power led on forever, no screen light or any other reactions. SD in it or w/out it makes no difference. Dunno what happened to it before i got it but hardmod didn't do the trick (correct reader, but blue screen popped for one second and then it turns itself off so no dump or injecting).

I'm not into any cfw or modding, retail user, so my knowledge about scene and posibilities for fixing it are minimal.
So there's only one question from me here - is this motherboard fixable? Any tips or any help here? Thanks! :)
Maybe the SD reader in the console isn't working?
 

greenDarkness555

Well-Known Member
Member
Joined
Feb 27, 2016
Messages
122
Trophies
0
Age
28
XP
220
Country
United States
So, as far as magnets go will pretty much any kind work? Would using a large magnet be a problem? Would a strong magnet damage my 3DS?
Thanks!
 

Alex S

Creator Of WWHDM, And Metroid Fusion XER0X!
Member
Joined
May 2, 2016
Messages
695
Trophies
0
Location
Hell
Website
www.erm.wut
XP
1,002
Country
United States


Is it fake ?

Envoyé de mon SM-G930F en utilisant Tapatalk


If thats not fake (which the video is prolly just a ntr cart inside a ctr cart to fool people.) Then that means real ctr carts can be used (including sky3ds) to flash ntrboothax. I dont know how this person did it, but i assume they might have had a previous install of b9s and just booted that with the ctr card already in.
 

Cuphat

Well-Known Member
Member
Joined
May 16, 2011
Messages
1,295
Trophies
1
XP
1,223
Country
United States
  • Like
Reactions: Mushkin

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country

RazorX2014

Well-Known Member
Member
Joined
Mar 18, 2014
Messages
621
Trophies
0
Age
39
XP
421
Country
Yes, you will have to get a dump from elsewhere and flash it after installing godmode. I can provide you with an AK2i HW81 dump.
its ok i figured it out, i downloaded the HW_81 and HW_44 flashrom from 3ds guide and the HW_81 was 16.0MB which was exactly the size of my dump and the other one was just 2.0MB so i got my answer but thanks
 

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country
i looked at that, it said the dump flash will tell me the hw rev but it doesnt it just says dump complete
Acekard can be used on maghax firmware. I also don't think flashing wrong backup would permanently brick it, it just won't work. But I don't want to risk mine to try it...
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    BunnyPinkie @ BunnyPinkie: Cuz I joined this site to follow ds game translations