Yes it 100% needs to be bzImage and not bzImage.txt LOL
I should not laugh, I did exactly the same thing a while ago.
If this works I've finally spent 2 days but with a good purpose
If it won't
Rip
Thanks Leeful
Also to KiiWii I've been a great pain "there"
I can't believe this works.
I've lost 2 days because of ".txt"
Thanks guys!
Installing!
Last edited by Sergi8,
Actually I got stuck cause it says that there is no "psxitarch" file, even tho I inserted the USB etc.
It's like it check every USB port and doesn't find the right one.
I'm switching ports, will let you know
Edit:
Ok, second try with No-Edid
Switched ports, seem it should work (it has found the file)
I don't know how much I need to wait but other people said about 20/30 mins.
Will let you know
Last edited by Sergi8,
Have you formatted to FAT32 ?
is psxitarch.tar.xz file on the USB?
did you type exec install-psxitarch.sh
If you are using v2 files the md5s are:
bzImage - md5 : 20FE8941F2238B35822EA61939F2393D
nitramfs.cpio.gz - md5: 7C38CA9C4EAFF335EF52CEF398AB1278
psxitarch.tar.xz - md5: 8058D928B9A3F9532D55535E166789F7
If you are using v1 files the md5s are:
bzImage - 85D3A15A22380591F5519122F436C7BA
initramfs.cpio.gz - A3E4D2E6A15FEA750ED4E8CCCACFA112
psxitarch.tar.xz - 26BAE18CCC2E2173109A7FD954657C08
You cannot mix and match files from v1 and v2.
If you are using v1 use the eeply loader.
If you are using v2 use the NOEID or 1GBVRAM loader.
is psxitarch.tar.xz file on the USB?
did you type exec install-psxitarch.sh
If you are using v2 files the md5s are:
bzImage - md5 : 20FE8941F2238B35822EA61939F2393D
nitramfs.cpio.gz - md5: 7C38CA9C4EAFF335EF52CEF398AB1278
psxitarch.tar.xz - md5: 8058D928B9A3F9532D55535E166789F7
If you are using v1 files the md5s are:
bzImage - 85D3A15A22380591F5519122F436C7BA
initramfs.cpio.gz - A3E4D2E6A15FEA750ED4E8CCCACFA112
psxitarch.tar.xz - 26BAE18CCC2E2173109A7FD954657C08
You cannot mix and match files from v1 and v2.
If you are using v1 use the eeply loader.
If you are using v2 use the NOEID or 1GBVRAM loader.
Ok everything went for the best
Inside the OS right now.
Will boot it up with the 3GB version
--------------------- MERGED ---------------------------
Last thing now.
I'm updating the OS with Pacman "sudo pacman -Syu"
Since I have a Pro and I've heard the fans are not working properly (there is no dynamic control over the temperature)
Is there a way to set them to 50%?
I dont know, sorry.
I only know how to get it up and running on the PS4. I'm a complete novice when it comes to Linux.
I saw some mention of fan controll on twitter but I can't remember who.
@KiiWii do you have any info on this?
I can't believe I lost 2 days because of the extension.
Now works great
Just tried some Steam games
Some work, some other don't
F.i. Battleblock Theatre doesn't open
Garry's Mod reaches 120fps at "default" settings (almost everything maxed out)
Not pushing it because I need the Payload for the Fan Control (which should be on its way)
Now works great
Just tried some Steam games
Some work, some other don't
F.i. Battleblock Theatre doesn't open
Garry's Mod reaches 120fps at "default" settings (almost everything maxed out)
Not pushing it because I need the Payload for the Fan Control (which should be on its way)
Fans are fine, the threshold is high and ps4 pro is not in "pro" mode in Linux, probably why the fans don't spin high. It doesn't get hot enough.
The fan works fine on all console versions, it's just either set high on the Pro(perhaps the base/slim version) (79 degrees c), it's just that Pro doesn't heat as much so the fan doesn't trigger, but now we know how to set a lower limit which is what I prefer (60)
— Zer0xFF (@Zer0xFF) February 14, 2019
A bit off topic, can anyone check black color levels while in linux? I have black crush issue.
http://www.lagom.nl/lcd-test/black.php
Most of the squares should be visible, but on Linux I only see bottom two.
Last edited by Kaan_,
Can't it be due to PSXITARCH default contrast?
I wrote him to ask when the Payload for 60°C will be ready
I don't know, haven't found a way to change it. Playing with gamma helps but then it becomes too washed out.
Same with you too, this causes loss of detail on mid to dark portions of the screen when watching video or gaming. I asked on Twitter about this but got no reply.
Last edited by Kaan_,
I played Binary Domain just an hour ago
It's not natively supported by Linux so I had to use Steam Play and Proton, but the audio stutters
Garry's Mod reaches about 120 FPS and seems stable (but this time it is supported on Linux)
A part for that I didn't try much else because I want to wait for the Fan Control patch on 60°C
P.S. I forgot that the image quality (contrast etc.) look good to me
Maybe it's just a Firefox's problem
Try with another Web Browser
I had this very same problem on Windows 10 when changing from Chrome to Edge (colors where totally different)
Last edited by Sergi8,
If you need anything else just look on Google on "HOW TO" on ARCHLINUX (it's an official linxu distro, same as PSXITARCH)
I'm not sure about this but doesn't PLEX support IPTV, too?
So I read it and
Just to be clear
If I set the fan trigger at 59°
It will trigger even on "standard" gaming (with PS4 titles)?
Seems like a Win-Win situation to me
Similar threads
- No one is chatting at the moment.
-
-
@
K3Nv2:
I'd like to see a DS emulator that allows casting top screen to TV then use bottom for the touch screen stuff+1 -
-
-
@ HiradeGirl:
@K3Nv2 I did that using Citra for 3DS games. Bottom screen was my smartphone. Until I got the touch screen. -
-
-
-
@
Psionic Roshambo:
Ken I have that sort of set up on Drastic on Pi for games that don't require touch -
-
-
Any TV with your PC connected with Citra and any smartphone to use as a screen using a free play store app.+1
-
-
-
-
-
-
-
-
-
-
-
-
-
