Hardware Need help with fixing a Switch

[NoNAND]

Sorry guys for being a total noob but I've got another Switch to fix and it's been months since i fixed mine
Anyways
This Switch i have has some missing screws and needs a new backplate but the thing is.

What screwdrivers doo i need for the switch?
What screws do i need for the bottom part near the USB c port and on the upper part near the cooling vents
Also what tri point screws do i need for the back?

Can someone tell me the exact sizes of the screws and their respective screwdrivers?

Thanks.

 

[SheriffBuck]

I'd recommend looking on eBay for a Switch screws kit which should contain all the replacement screws you need. You would be hard pushed to get them individually. Kits cost a few dollars.

Again, you can find precision screwdriver kits on eBay that are compatible with the Switch. For what it's worth, I recommend the
iFixit Mako Precision Bit Set. You will need a Y00 bit and a PH00 to get your Switch reassembled.

The screws that hold the metal heat panel are all held in with silver screws (same as the ones supporting the board around the 3.5mm jack and the USB Type-C on the PCB.