Homebrew N3DS doesn't boot at all!

[Manurocker95]

That sounds like a hardware failure then. Did you do anything before the brick? Like restoring a NAND backup or updating the system?

I Did both things.

 

[xtheman]

I Did both things.

Did it not turn on after or a while after?

 

[Manurocker95]

Did it not turn on after or a while after?

Well, if i remember correctly, a while after. I was playing and the 3ds suddenly froze. After the hardreset it stayed like It is now.

 

[xtheman]

Well, if i remember correctly, a while after. I was playing and the 3ds suddenly froze. After the hardreset it stayed like It is now.

That sounds like some sort of hardware failure then.

 

[umbjolt]

Could you try booting without any cartridge? Sometimes if I boot with my R4 inserted the 3ds "boot" with black screens.

 

[eldavo2090]

Man I have otpless new 3ds too!
Is there a way to change it so it has otp?

 

[Kyousak]

Man I have otpless new 3ds too!
Is there a way to change it so it has otp?

Otp ist just a file from the 3ds itself that is needed for installing A9LH.
It doesnt make any difference for you

 

[KomasterXX]

So final clarification, us N3ds Otpless A9lh Installers with Luma should not worry that we used the otpless method, and that we are safe from rare and random bricks in the future? And perhaps that this case is indeed a Hardware related issue instead?

 

[Roomsaver]

So final clarification, us N3ds Otpless A9lh Installers with Luma should not worry that we used the otpless method, and that we are safe from rare and random bricks in the future? And perhaps that this case is indeed a Hardware related issue instead?

If you installed OTPless A9LH without any issues, you're fine. This sounds like a hardware issue.

 

[nMM456]

Try deleting the config inside the luma folder.

 

[4gionz]

Dude number 1, if you have a ds cartridge or any cartridge remove that before booting.
If that doesn't work take a new sd with a freshly downloaded arm9loaderhax.bin(not your old one a freshly downloaded one) and try that.im basically 99% sure Your 3ds didn't randomly brick. This problem has happened to me and it was always the cartridge or the sd

 

[Kinnayan]

Shizzz now I'm scared as hell

Sent from my A0001 using Tapatalk

 

[eldavo2090]

Fitting for our current situation

 

[Manurocker95]

Could you try booting without any cartridge? Sometimes if I boot with my R4 inserted the 3ds "boot" with black screens.

There's no cart inside the 3ds. :S

 

[wurstpistole]

What happens when you hold select on boot? Does the Luma configuration screen appear? If yes, turn on the developer error log option and tell me what it says.

Did it work before at some point and just stopped working now after updating Luma?

 

[Manurocker95]

What happens when you hold select on boot? Does the Luma configuration screen appear? If yes, turn on the developer error log option and tell me what it says.

Did it work before at some point and just stopped working now after updating Luma?

As i said, any Luma payload responses, so i can't turn any option on. Seems to be a hardware failure cz it happened suddenly when i was playing.

 

[umbjolt]

I have an idea that *might* work. Send me PM so I can response you in spanish and if it works, I translate it to english to post here

 

[Manurocker95]

Okay, i opened my n3ds and checked everything was well connected and now the 3ds boots but freezes when doing it. Does anyone know for sure if formatting the 3ds by settings, resets the nand? (as it seems to have something corrupted)