Modded OLEDs does not detect joycon

[impy101]

I'm starting to see more and more OLEDs that have been modded after which one of the joy-con rails no longer detects when a joy-con is inserted. Wireless it works fine, but when the joy-con is inserted into the switch it will still show up as wireless.

Any idea what could be causing this? The flex cable is definitely plugged in.

 

[Hayato213]

Most likely it is the rail

 

[jkyoho]

I'm starting to see more and more OLEDs that have been modded after which one of the joy-con rails no longer detects when a joy-con is inserted. Wireless it works fine, but when the joy-con is inserted into the switch it will still show up as wireless.

Any idea what could be causing this? The flex cable is definitely plugged in.

try OFW see if it works in handheld. I have similar issue but after couple times disconnect all controllers from setting and reconnect, that fixes it.

 

[l7777]

I'm starting to see more and more OLEDs that have been modded after which one of the joy-con rails no longer detects when a joy-con is inserted. Wireless it works fine, but when the joy-con is inserted into the switch it will still show up as wireless.

Any idea what could be causing this? The flex cable is definitely plugged in.

If there is a connection between modding and the joycon problem it would almost certainly be related to the removal/reinstallation of the joycon flex cables/connectors. Either not being re-connected properly or damaged during the process.

 

[impy101]

If there is a connection between modding and the joycon problem it would almost certainly be related to the removal/reinstallation of the joycon flex cables/connectors. Either not being re-connected properly or damaged during the process.

I thought that too, but the connectors are perfectly in order and the flex cables appear brand new.

 

[The Real Jdbye]

I thought that too, but the connectors are perfectly in order and the flex cables appear brand new.

Probably has nothing to do with the mod, in any case.

 

[Hayato213]

I thought that too, but the connectors are perfectly in order and the flex cables appear brand new.

I would reseat the cable for the side that have problem to see if it was just loose.

 

[dragonmaster]

I would reseat the cable for the side that have problem to see if it was just loose.

i had a situation where my switch displayed this behaviour, cable did not clip well...