Homebrew Luma3ds 3d settings

[why_me]

This question probably has an obvious answer, and I just can’t find it. In the luma 3ds quickmenu, there is a separate menu for the new 3ds. In there, you can change the values of the parallax barriers (which I was dumb enough to do). Now, I cannot for the life of me find a configuration or an article on the internet on how to revert it or reset it. The 3d slider no longer responds. I actually created an gbatemp account just to make this thread. Any help that is given is strongly appreciated.

 

[Kwyjor]

I'm not familiar with that specific setting, but if I'm not mistaken, settings like that are stored in a .ini file on the SD card.

If you turn off the 3DS and boot it without an SD card inserted, does the problem go away?

 

[zekro94]

I tried on my New 3ds Xl and it says barrier position 13, I don't know if it helps.
Edit: Okay, so in the Super-Stable 3d Calibration submenu, the center position is 5.12, that seems to be the sweet spot for it. In order to calibrate it you need to enter a game and push the 3d slider to max, then enter the 3ds quickmenu and go to Super-Stable 3d calibration, if you don't use the slider then it won't let you calibrate it since it will say it's not in use

 

[why_me]

I'm not familiar with that specific setting, but if I'm not mistaken, settings like that are stored in a .ini file on the SD card.

If you turn off the 3DS and boot it without an SD card inserted, does the problem go away?

The problem does leave after removing the SD card.

I booted FTPD and looked at the config.ini file, but didn't change anything. (I couldn't find a section for the new 3ds settings on the rosalina menu.) When I returned home, however, everything seemed back to normal. The 3d works now, but the parallax barriers were still unaligned. I went back to the rosalina menu and set the barrier to 5.12 (thanks, zekro94) and re-exited. There has still been no issue as of now. I've reinserted the SD card and everything still seems to be working properly. Thank you both so much for your help! I'll try to follow zekro94's instructions to resolve the issue if it happens again, but if not, I'll list the issues.

Thanks again! I was beginning to get a headache.

 

[Kwyjor]

I booted FTPD and looked at the config.ini file, but didn't change anything.

I was going to suggest deleting (or just renaming) the .ini file entirely. But it seems you have it working again regardless.

 

[zekro94]

The problem does leave after removing the SD card.

I booted FTPD and looked at the config.ini file, but didn't change anything. (I couldn't find a section for the new 3ds settings on the rosalina menu.) When I returned home, however, everything seemed back to normal. The 3d works now, but the parallax barriers were still unaligned. I went back to the rosalina menu and set the barrier to 5.12 (thanks, zekro94) and re-exited. There has still been no issue as of now. I've reinserted the SD card and everything still seems to be working properly. Thank you both so much for your help! I'll try to follow zekro94's instructions to resolve the issue if it happens again, but if not, I'll list the issues.

Thanks again! I was beginning to get a headache.

Well thanks to you I updated my luma version since mine was on v11 and didn't have those settings. It was a shot in the dark but at least it works now and maybe it can be used if someone else will have this problem in the future.
Also I've seen a setting named Temporarily Disable Super-stable 3d. Maybe you used that setting and that's why it wasn't working?

 

[why_me]

Well thanks to you I updated my luma version since mine was on v11 and didn't have those settings. It was a shot in the dark but at least it works now and maybe it can be used if someone else will have this problem in the future.
Also I've seen a setting named Temporarily Disable Super-stable 3d. Maybe you used that setting and that's why it wasn't working?

I enabled and disabled that setting a couple of times, but it didn’t seem to change anything. To be fair, though, I didn’t have a bit of an idea of what I was doing, so you’re probably right. As of now, I’ve been playing on it for about half an hour and no problems have been present.

Thanks to both of you! I’ve been struggling with this for about 2 days.