Hacking I need help with Hackmii (Wuphax Vwii)

[TrOpHiE]

So, my problem is everytime I start hackmii (try to install homebrew on the vWii with wuphax), I can't get past the scam screen, because my Wiimote just turns off, and I cant reconnect. I am using a wiimote with no wiimotion plus or wii motion plus attachment. The Wii U / vWii also doesn't freeze.

 

[Alexander1970]

Hello.

So, my problem is everytime I start hackmii (try to install homebrew on the vWii with wuphax), I can't get past the scam screen, because my Wiimote just turns off, and I cant reconnect. I am using a wiimote with no wiimotion plus or wii motion plus attachment. The Wii U / vWii also doesn't freeze.

The Step before was successful ?

1. Launch the Homebrew Launcher.
2. Launch Wuphax.
3. Press A to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!.
   • You will be taken back to the Wii U Menu after a few seconds.

Thank you.

 

[TrOpHiE]

Thanks for the Reply, Yes, I successfully installed wuphax and injected hackmii into the mii channel on the vWii. But my problem is that im stuck on this screen because my wiimote disconnects.

 

[Alexander1970]

Thank you.

Thanks for the Reply, Yes, I successfully installed wuphax and injected hackmii into the mii channel on the vWii. But my problem is that im stuck on this screen because my wiimote disconnects.

Your Wii Motion Controller is an ORIGINAL NINTENDO one ?
Is Motion Plus inside/without/as Adapter attached ?
Did you maybe have some USB Devices attached (very important !!!) ? If yes,please disconnet them and try it again.

Thank you.

 

[TrOpHiE]

Hi, so I don't have any usb connected and I am pretty sure its a original wiimote.

So the wiimote turns off at the "launching booter screen".
I dont have anything todo with wiimotion plus connected to the wiimote. I also tried using 1.2hackmii and 1.0. And I also cant turn off the wii u normally, I need to plug out the power supply. (It also doesn't work when I hold the power button for 5 seconds)

One question would it work with a gamecube controller (with the wii u adapter connected)? I don't have one yet, but I am planning to buy one.

 

[Alexander1970]

Thank you.

Hi, so I don't have any usb connected and I am pretty sure its a original wiimote.

So the wiimote turns off at the "launching booter screen".
I dont have anything todo with wiimotion plus connected to the wiimote. I also tried using 1.2hackmii and 1.0. And I also cant turn off the wii u normally, I need to plug out the power supply. (It also doesn't work when I hold the power button for 5 seconds)

One question would it work with a gamecube controller (with the wii u adapter connected)? I don't have one yet, but I am planning to buy one.

I am pretty sure,a Gamecube Controller/Adapter is not working on the vWii for the Exploit.
Please also disconnect a Nunchuk or any other Peripheral from your Wii Motion Controller.

Your SD Card is not write protected ? By the Way which Type (microSD with Adapter or Regular) ?
Please always try a regular SD Card (not too big 2 to 32 GB) for the Exploit.You can change it later to a bigger one.
How is the SD Card formatted please ?

Is your Wii Motion Controller synced with the Wii U or the vWii Mode ? Maybe your Wii Motion Controller is not in the correct "Order" ?

Good Luck.
Thank you.

 

[TrOpHiE]

Hi, so I tried it again, and its the same. And yes the SD Card is formatted in fat32. Would a video of "it" happening help? And I synced the wiimote in the wii u "mode" and in the "vwii" mode, I tried both, it still didn't work. The only thing that is also weird, is that I cant turn off the console normally, but I can see that its not frozen, is it meant to be like that?

 

[Alexander1970]

Thank you.

Hi, so I tried it again, and its the same. And yes the SD Card is formatted in fat32. Would a video of "it" happening help? And I synced the wiimote in the wii u "mode" and in the "vwii" mode, I tried both, it still didn't work. The only thing that is also weird, is that I cant turn off the console normally, but I can see that its not frozen, is it meant to be like that?

Regular SD Card or microSD Card ? And the Size please.

Is your Wii U already modded ? How is/was the Firmware Version of your Wii U please ?
Thank you.

 

[TrOpHiE]

Hi, so yeah my wii u is already modded with haxchi. The Firmware is 5.5.1E. It's a Regular SD card. The SD Card is 128gb but formatted down to 32gb. (I did this for FAT32).

It should be noted that a few years ago, I also tried modding my vWii and I had the same exact thing happening to me with a 8gb sd card.

Also, Thanks for your help, I appreciate it, but this will be my last message for today its already late for me.

 

[godreborn]

sd card should be fine. I'm using a 256GB full sized sd card in mine. everything works with the wii u and vwii.

 

[TrOpHiE]

One question , is it possible to dump wii games without modding the vWii?

 

[TrOpHiE]

Alright, I fixed the problem, I used the vWii Decaffeinator. Injected wuphax again and when launching the mii channel (bootmii/hackmii), My wiimote disconnected, and then reconnected so it worked, and I was able to install hbc.

 

[Alexander1970]

Congratulations.

One question , is it possible to dump wii games without modding the vWii?

No,that is not possible.
You need a modded Wii or vWii and Tools like "Cleanrip" or the Dump/Install Option from the USBLoaders.
Another Way is a PC with a "special" LG DVD-Rom Drive and a lot of Time.Not really a "reasonable" Option today.

Thank you.

 

[BaamAlex]

One question , is it possible to dump wii games without modding the vWii?

If you don't want to mod it, how should it be possible to run unsigned code?