There doesn't seem to be much documentation on this, so I decided to write up a guide. With my testing I can't get audio working, it breaks everything severely. If you can get audio working with the same low-latency, let me know and I'll update the guide.


Downloads:

• The latest version of SysDVR-Client
• The latest version of SysDVR (Stream over WiFi) or SysDVR-USB-Only (Stream over USB)
• VLC 2.2.8 (32-bit Windows ll 64-bit Windows)
• Zadig (For USB Only)

Extraction:

1. Extract either SysDVR.zip or SysDVR-USB-Only.zip to the root of your SD Card
2. Extract vlc-2.2.8-win[32 or 64].7z to its own folder
3. Extract SysDVR-Client.7z to its own folder

VLC Setup:

1. Start vlc.exe from your VLC folder
2. If prompted, do not update VLC
3. Select "Tools" > "Preferences" at the top of the window
4. Select the "Inputs / Codecs" Tab
5. Set "Hardware-accelerated decoding" to "Automatic"
6. Set "Live555 stream transport" to "RTP over RTSP (TCP)"
7. Set "Show settings" in the bottom-left corner to "All"
8. Select the "Inputs / Codecs" Tab
   
9. Set "Network caching (ms)" to 100
10. Select "Save"

USB Setup (Skip if using network):

1. Connect your switch to your PC via USB (Tested using USB 3.0)
2. Launch Zadig
3. Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing. If you are using the full version of SysDVR on your Switch make sure to start it using the SysDVR config in the Homebrew Launcher.]

Network Setup (Skip if using USB):

1. Open the Homebrew Launcher
2. Launch the SysDVR Config app
3. Select "Stream over RTSP"
4. Close the Homebrew Launcher

Launch (USB):

1. Connect the Switch to your PC via USB
2. Open a compatible game on the Switch (Games that support capture recording)
3. Open SysDVR-Client.exe on your PC
4. Type "SysDVR-Client.exe bridge [Your PC's IP Adress Here] --no-audio and hit 'Enter'
5. Open VLC
6. Inside VLC select "Media" > "Open Network Stream..."
7. Type or copy/paste "rtsp://127.0.0.1:6666/" (Without the Quotes) and select "Play"

Launch (Network)

1. Open a compatible game on the Switch (Games that support capture recording)
   
2. Open SysDVR-Client.exe on your PC
   
3. Type "SysDVR-Client.exe bridge [Your Switch's IP Adress Here] --no-audio and hit 'Enter'
   
4. Open VLC
   
5. Inside VLC select "Media" > "Open Network Stream..."
   
6. Type or copy/paste "rtsp://127.0.0.1:6666/" (Without the Quotes) and select "Play"

You should be all set up! You can now follow the launch instructions whenever you'd like to stream.



This guide was written/tested using the USB mode. The network instructions were pieced together off information that I could find, so please let me know if there are any issues, I will edit the guide. If you need any help/support feel free to leave a comment!

 

[Souperman9]

There's no way streaming over network will give you playable latency.

 

[nintenbrolluseless]

There's no way streaming over network will give you playable latency.

It can! I got the basic idea from this reddit thread, but the instructions were unclear and didn't work, so I figured it out and made a guide.

 

[Souperman9]

It can! I got the basic idea from this reddit thread, but the instructions were unclear and didn't work, so I figured it out and made a guide.

Huh, that's really cool actually. I'm pleasantly surprised!

 

[xroxas99]

3. Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]
what if mine is 057e 2000 how to correct it?

 

[nintenbrolluseless]

3. Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]
what if mine is 057e 2000 how to correct it?

Sorry for the late response, that means you have the wrong device selected.

 

[derYASIN]

Idea for audio capturing: Connect a aux cable to switch and the computer you streaming to.

 

[nintenbrolluseless]

Idea for audio capturing: Connect a aux cable to switch and the computer you streaming to.

I actually thought about that, but the slight latency might be more noticable. I'll try it out later with Audacity.

 

[_Mizuto_]

When I lunch the Client it closes immediatly
Can you help me please

 

[nintenbrolluseless]

When I lunch the Client it closes immediatly
Can you help me please

Make sure hardware-accelerated decoding is set to automatic in VLC.

 

[Olmectron]

USB Setup (Skip if using network):

1. Connect your switch to your PC via USB (Tested using USB 3.0)
2. Launch Zadig
3. Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]

The thrid step isn't possible if you don't start SysDVR in your Switch beforehand. Your guide doesn't mention it anywhere. Because the SysDVR (Nintendo Switch) entry doesn't appear otherwise

 

[diesel701]

Tried again but same as before there is always a little lag that does not make playable the game. I tried USB mode.

In your guide the USBmode does not work if you use bridge <IP addess>

 

[nintenbrolluseless]

SysDVR starts on its own

 

[Olmectron]

SysDVR starts on its own

Well, not really? I had to start SysDVR config and set it to start when I turn the console on. After that, yeah, it starts in their own.

What I mean is I had to go to another thread to find that out. It wouldn't hurt having that info here.

 

[nintenbrolluseless]

Well, not really? I had to start SysDVR config and set it to start when I turn the console on. After that, yeah, it starts in their own.

What I mean is I had to go to another thread to find that out. It wouldn't hurt having that info here.

My bad, must be specific to network setup. What exactly should I add to the guide?

 

[Olmectron]

My bad, must be specific to network setup. What exactly should I add to the guide?

In this step, that is already in your guide: "ll the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]", just add something along the lines of "The Device won't show unless you already started SysDVR from the SysDVR config homebrew. If you configured SysDVR before, it should be started when you turn on your console."

 

[nintenbrolluseless]

In this step, that is already in your guide: "ll the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]", just add something along the lines of "The Device won't show unless you already started SysDVR from the SysDVR config homebrew. If you configured SysDVR before, it should be started when you turn on your console."

Fixed

 

[Nikoru]

Terminating Video thread due to ExtendedSocketException...

 

[RY0M43CH1Z3N]

Anyone tried with the portable version?

 

[diesel701]

A new version of SysDvr is in development with a reduced latency. I think the dev is near the release, so better to wait