Hacking Help won't on after downgrade

[Lacius]

That's not the problem. My switch can't boot into Rcm. The switch has a problem not my computer or tegrarcmgui.
Why i need tegrarcmgui when my switch is not in rcm mode.

If your Switch will not enter RCM, then there are two likely possibilities:

1. The battery is dead, in which case you need to charge it for a while before trying again (this happens occasionally to people when a system is accidentally left in RCM with AutoRCM installed).
2. You aren't following the the steps correctly to enter RCM.

 

[ThatFinn]

My switch do nothing. I cannot start my switch normal or in Atmosphere. It looks like a broke nintendo switch but it cannot be only with a firmware downgrade

--------------------- MERGED ---------------------------

I charged my switch 10 hours. And AutoRCM isn't activated

 

[BaamAlex]

That's not the problem.

That is the problem dude. Your pc doesn't detect your console because the drivers are missing.

My switch can't boot into Rcm

Your console is in rcm mode. I saw your video. The screen is black. But the drivers are missing on your pc. The stock firmware should be accessible. If the screen stays black it means you have somehow autorcm enabled. Or your battery is dead. But install the drivers first. TegraRCMGui has an option for that.

 

[ThatFinn]

I open TegraRcmGUI and i installed the drivers. Nothing works and usually when i am in rcm i can press the power button 15-20sec and then it start normal. Before the switch didn't work the power was 51% and yesterday i charged my switch 10 hours (in the night).

 

[BaamAlex]

What happens when you turn on the console normally?

 

[ThatFinn]

The first time i get an error and now when i want to start my console normal nothing happens, black screen, no nintendo switch logo, nothing

 

[BaamAlex]

The first time i get an error

That's the second or third time where i ask you which error that is?

 

[ThatFinn]

I can't remember full code. I only know the first 4 number: 2001
It can be that the other 4 numbers are 2368 but i can't remeber perfect

 

[BaamAlex]

And what happens when you put the console into rcm? And what shows tegrarcmgui when you connect your console with your pc? The rcm should be always accessible.

 

[ThatFinn]

I cannot boot into rcm. When you watch the viedeo you see it looks like i am in rcm but nothing works. I don't know why i can't access rcm after downgrade.

 

[lolcatzuru]

I am going to bookmark this for the inevitable point that it will cost him more to replace the switch then it wouldve to just buy online.

 

[Hayato213]

No RCM jig?

 

[BaamAlex]

No RCM jig?

He has a jig.

 

[ThatFinn]

Has anybody a idea what can i do that boot into rcm work?
And lolcatzru my english isn't the best. Do you mean a repair cost more than a new nintendo switch?

 

[lolcatzuru]

Has anybody a idea what can i do that boot into rcm work?
And lolcatzru my english isn't the best. Do you mean a repair cost more than a new nintendo switch?

Either one will cost more than the 10 dollars it costs too have online

 

[Hayato213]

Has anybody a idea what can i do that boot into rcm work?
And lolcatzru my english isn't the best. Do you mean a repair cost more than a new nintendo switch?

You are suppose to connect the usb c cable first to the computer and the tablet then trying to enter rcm mode, if the driver is installed correct it should detect it, as for troubleshooting the driver you can use Zadig 2.4

 

[ThatFinn]

I tried use a other USB3 cable and a other laptop but nothing works.
and lolcatzru now i understand your message
and Hayato213 what is zadig 2.4?

 

[lolcatzuru]

I tried use a other USB3 cable and a other laptop but nothing works.
and lolcatzru now i understand your message
and Hayato213 what is zadig 2.4?

https://lmgtfy.com/?q=zadig+2.4&s=l&qtype=search&ovr=1

this should help.

 

[Hayato213]

I tried use a other USB3 cable and a other laptop but nothing works.
and lolcatzru now i understand your message
and Hayato213 what is zadig 2.4?

You use that to troubleshoot the driver if it isn't setup correctly, in your case probably ain't the issue, you should try to see if you can get it to turn on right now, and work from there.

 

[lolcatzuru]

You use that to troubleshoot the driver if it isn't setup correctly, in your case probably ain't the issue, you should try to see if you can get it to turn on right now, and work from there.

im on switchologist here but im wondering if he tried to short a patched unit.