1. DrPupper

    OP DrPupper Newbie
    Newcomer

    Joined:
    Apr 10, 2020
    Messages:
    7
    Country:
    United States
    Hello there! I am completely new here and I just recently ran into a problem with USB Loader GX on my RVL-101 Wii. To explain myself, I softmodded my Wii a while back, where all went fine and I was able to run a few Wii games on USB Loader GX through a Staples 8GB USB Flash Drive, (I don't have my hands on a proper HDD just yet), but regardless, everything worked fine. Recently I decided to add a few more Wii games and the addition of some Gamecube ones as well. I used Wii Backup Manager to transfer the new Wii games, then manually put the Gamecube games in subfolders within a "games" folder. I tried out the Gamecube games and worked just fine through USB Loader GX, but once I checked on my new Wii games, they would not load and stayed on a black screen. Checking my other Wii games led to the same result. I've tried reinstalling IOS's on cIOS installer through the wii.guide site, but yet again, the same result. Is there something I did wrong and is this fixable? Here is my System Check
    SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
    ...runs on IOS58 (rev 6432).

    Region: NTSC-U
    System Menu 4.3U (v513)

    Drive date: 12.07.2010
    Homebrew Channel 1.1.2 running on IOS58

    Hollywood v0x21
    Console ID: 235373763
    Console Type: Wii
    Shop Channel Country: United States (49)
    Boot2 v5
    Found 107 titles.
    Found 48 IOS on this console. 16 of them are stubs.

    IOS3 (rev 65280): Stub
    IOS4 (rev 65280): Stub
    IOS9 (rev 1290): No Patches
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 782): No Patches
    IOS13 (rev 1288): No Patches
    IOS14 (rev 1288): No Patches
    IOS15 (rev 1288): No Patches
    IOS16 (rev 512): Stub
    IOS17 (rev 1288): No Patches
    IOS20 (rev 256): Stub
    IOS21 (rev 1295): No Patches
    IOS22 (rev 1550): No Patches
    IOS28 (rev 2063): No Patches
    IOS30 (rev 2816): Stub
    IOS31 (rev 3864): No Patches
    IOS33 (rev 3864): No Patches
    IOS34 (rev 3864): No Patches
    IOS35 (rev 3864): No Patches
    IOS36 (rev 3864): No Patches
    IOS37 (rev 5919): No Patches
    IOS38 (rev 4380): No Patches
    IOS40 (rev 3072): Stub
    IOS41 (rev 3863): No Patches
    IOS43 (rev 3863): No Patches
    IOS45 (rev 3863): No Patches
    IOS46 (rev 3863): No Patches
    IOS48 (rev 4380): No Patches
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS52 (rev 5888): Stub
    IOS53 (rev 5919): No Patches
    IOS55 (rev 5919): No Patches
    IOS56 (rev 5918): No Patches
    IOS57 (rev 6175): No Patches
    IOS58 (rev 6432): USB 2.0
    IOS60 (rev 6400): Stub
    IOS61 (rev 5918): No Patches
    IOS62 (rev 6430): No Patches
    IOS70 (rev 6912): Stub
    IOS80 (rev 7200): No Patches
    IOS222 (rev 65280): Stub
    IOS223 (rev 65280): Stub
    IOS249[56] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
    IOS250[57] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
    IOS251[58] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65280): Stub
    BC v6
    MIOS v10
    Report generated on 04/10/2020.
     
  2. Cyan

    Cyan GBATemp's lurking knight
    Former Staff

    Joined:
    Oct 27, 2002
    Messages:
    23,305
    Country:
    France
    did you try boh usbport?
    looks like you plugged it back in the wrong one.

    wii games work only with USB Port 0 (the bottom port on Wii)
     
    jeannotte likes this.
  3. DrPupper

    OP DrPupper Newbie
    Newcomer

    Joined:
    Apr 10, 2020
    Messages:
    7
    Country:
    United States
    At the moment I am busy making a bootmii NAND backup via HBC and updating some apps. I'll try to do what you said and notify once I am ready to.
     
  4. DrPupper

    OP DrPupper Newbie
    Newcomer

    Joined:
    Apr 10, 2020
    Messages:
    7
    Country:
    United States
    And to answer you, I've always used the bottom-most USB port since plugging the middle/top one, makes USB Loader GX wait 20 seconds and never launch. However, USB Loader GX says Port 1 in its splash screen even though it's on the bottom port. Is that normal?
     
  5. Cyan

    Cyan GBATemp's lurking knight
    Former Staff

    Joined:
    Oct 27, 2002
    Messages:
    23,305
    Country:
    France
    if it used to work "just before adding more games" there shouldn't be any reason it doesn't work anymore.
    last time it worked is "just before", right?

    or years ago?
    is your flashdrive always been in FAT32, or was it formatted to WBFS when "it worked" ?

    because flashdrives are usually not working well, unless you use IOS58 (not an cIOS) or WBFS (old partition format, not wbfs files on fat32)

    it it was working with FAT32 before, did you try to reset the settings of the loader? maybe it's something you changed recently.


    I just go with "it used to work so it still should", because flashdrives are usually taboo here.
     
    Last edited by Cyan, Apr 12, 2020
  6. DrPupper

    OP DrPupper Newbie
    Newcomer

    Joined:
    Apr 10, 2020
    Messages:
    7
    Country:
    United States
    Well it was always FAT32, but now I encounter a new problem. While the Wii games did not work, in either WiiFlow nor USB Loader GX, it still recognized the games in the menu and probperly booted into it through cIOS. But just minutes ago USB Loader GX just doesnt recognize it anymore, booting into IOS58 mode for the first time (This is through the same port that has always worked until now.) What do I do now? [New Notice] I defaulted USB Loader GX and it stopped working now.
     
    Last edited by DrPupper, Apr 13, 2020
  7. jeannotte

    jeannotte GBAtemp Addict
    Member

    Joined:
    Jun 15, 2016
    Messages:
    2,928
    Country:
    France
    Hello,

    Just advice:

    As Cyan says, a lot of problems with usb keys.:unsure:

    You can also test the wbfs format with your usb key, and test with the Loader "Configurable loader v70"
    Often people on the forum who play with usb keys, get an external hard drive in fat 32, and it works wonderfully afterwards.

    I don't want to influence anyone, just for information;)
     
    alexander1970 likes this.
  8. DrPupper

    OP DrPupper Newbie
    Newcomer

    Joined:
    Apr 10, 2020
    Messages:
    7
    Country:
    United States
    I could definitely reformat it in the wbfs format, but that would mean losing GameCube compatibility, unless Nintendont still recognizes it as it is currently, but nonetheless it probably won't if I use wbfs or so I've heard. If this doesn't work, then I guess it means I'm going to have to wait to get an external drive at some point, the extra storage would be practical either way. ^_^
     
    jeannotte likes this.
  9. jeannotte

    jeannotte GBAtemp Addict
    Member

    Joined:
    Jun 15, 2016
    Messages:
    2,928
    Country:
    France
    If you put your support in wbfs format, you will lose your Gamecube games.:unsure:

    If you get a hard drive in FAT 32 format, you can put the Wii and Gamecube games on the same partition.:yayu:
     
    Last edited by jeannotte, Apr 13, 2020
    alexander1970 likes this.
  10. DrPupper

    OP DrPupper Newbie
    Newcomer

    Joined:
    Apr 10, 2020
    Messages:
    7
    Country:
    United States
    Welp it sounds like I'm going to wait for an HDD then. ¯\_(ツ)_/¯
     
    jeannotte likes this.
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Loader,