Apologies if this isn't the right forum for this; I tried asking on some subreddits already and didn't know where else to ask. I recently bought an FXPAK Pro to play on my SNES, but I can't seem to get it to play anything. It boots up to the menu just fine, but when I load a rom, it just fades to black and nothing happens.
I was told it might be a power supply issue, so I swapped out the standard SNS-002 for a Triad power supply with an appropriate adapter. The new PSU seems to work just fine, but games still aren't loading.
I also tried installing different firmware. v1.11.0b2-RevD and v1.11rc4 behave identically, and v1.10.3 seems to not work at all when I turn on the console.
The last thing I haven't tried is an alternate micro SD card, as my current one might be too big at 256gb. I was under the impression it would be fine as long as it was formatted to FAT32, so I'm unsure.
EDIT: Solved! Turning "Reset patch for clock phase" in the options was all I needed to. Everything loads fine!
I was told it might be a power supply issue, so I swapped out the standard SNS-002 for a Triad power supply with an appropriate adapter. The new PSU seems to work just fine, but games still aren't loading.
I also tried installing different firmware. v1.11.0b2-RevD and v1.11rc4 behave identically, and v1.10.3 seems to not work at all when I turn on the console.
The last thing I haven't tried is an alternate micro SD card, as my current one might be too big at 256gb. I was under the impression it would be fine as long as it was formatted to FAT32, so I'm unsure.
EDIT: Solved! Turning "Reset patch for clock phase" in the options was all I needed to. Everything loads fine!
Last edited by Roboticoblitera,
