Hardware [HACK] problem to rebuild the nand (Help me please)

[JeremKO]

-

 

[bombob]

1-You need a valid backup even Partial will do
2-you should not share your BISkey with the entire world

 

[Hayato213]

https://switch.homebrew.guide/usingcfw/manualchoiupgrade
https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/

/You can check out these two guides, what you can do is use that Bis Key of your and try to rebuild your NAND if your doesn't boot, always keep a NAND backup around to save yourself from headaches such as this. Also don't share your keys around here.

 

[JeremKO]

ok but on the other hand I did not make any backup before having this problem

 

[Hayato213]

If your doesn't boot and you don't have a working NAND backup with the correct boot 0/ boot1 you need to use Rajkosto guide to rebuild your NAND, Good luck.

 

[LapCheong]

No biskey and thats it

 

[JeremKO]

yeah so it will work more?

 

[LapCheong]

yeah so it will work more?

https://switch.homebrew.guide/usingcfw/manualchoiupgrade
https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/

/You can check out these two guides, what you can do is use that Bis Key of your and try to rebuild your NAND if your doesn't boot, always keep a NAND backup around to save yourself from headaches such as this. Also don't share your keys around here.

Do this guide

If i am not wrong your biskey is taken from your boot0/boot1 files. So you messed and didn't backup too bad...

 

[JeremKO]

ok

 

[Lacius]

I helped @JeremyKO over PM. We hopefully have the BIS keys, and we're attempting to rebuild the eMMC.