Error 002# - Zelda: Skyward sword

Discussion in 'Wii - Console and Game Discussions' started by Exxon-08, Nov 18, 2011.

Nov 18, 2011
  1. Exxon-08
    OP

    Newcomer Exxon-08 Newbie

    Joined:
    Dec 15, 2008
    Messages:
    6
    Country:
    Norway
    Hi, as you may already know from reading the title, I have difficulties loading Zelda: skyward sword after i just bought it. This was a little letdown, but since I haven't been using my wii for a very long time, I expected as much do to homebrew and all that. I read from another topic that syscheck can help you guys out in order for you to help me out. I'm basicly a noob, again -.-, and in need of your help.
    Stuff:
    -softmod
    -bootmi

    Basicly, i think I've done most important prior to before 2009.

    Syscheck:

    Warning: Spoilers inside!

    Thanks for all advices on beforehand. Really hope you can help me out:) Also, if you know what I need to get my HDD working again with homebrew(/just installed newest install, and it broke the functionality for me).
     
  2. MalayZN

    Newcomer MalayZN Advanced Member

    Joined:
    Jul 26, 2008
    Messages:
    54
    Country:
    Canada
    update 249 and 250 to dx2 and also add 236 in and use 249 to load ur game after =D
     
  3. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,417
    Location:
    Engine room, learning
    Country:
    France
    Your cIOS are a little old. (you have rev15, best compatibility now are either rev17 or rev21_d2x)
    A fix for "error #002" was included in old cIOS (up to cIOS rev14 if I remember), now it's done directly by the USBloaders.

    You should install the latest version : cIOS rev21 d2x v6

    Use method2 (installer) if you have internet access on your Wii.
    Then install these two cIOS:
    - d2x v6, slot249, base 56
    - d2x v6, slot250, base 57



    Then, it will depend on the USBloader you are using.
    use the latest version of the loaders, they all have the fix for error #002 enabled by default.



    After you updated both the cIOS and the loader, you may need a special setting for zelda:

    You have to enable an option called "Block IOS reload" in the USBloader's options.
    It will allow you to watch the WiiMotion+ video if you never watched it.
     
  4. Exxon-08
    OP

    Newcomer Exxon-08 Newbie

    Joined:
    Dec 15, 2008
    Messages:
    6
    Country:
    Norway
    Is there any way you MalayZN could add links for 249 250 --> dx2, link to 236 and so on.

    Also, i might sound really noob now: But I what loader should i use to run the game. Since, seeing how you responded, seems like i cannot use the default loader. I'd hate to get my HDD working now.
     
  5. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,417
    Location:
    Engine room, learning
    Country:
    France
    There are no "default" loader.

    You just choose the loader you want to use, between:

    uLoader (not updated anymore)
    Neogamma (works only with WBFS partition)
    WiiFlow
    Configurable USB Loader
    USB loader GX


    The last 3 work with FAT32/NTFS/WBFS


    About the links, I did it in my previous post.
    IOS236 is not required to play a game, but it can be useful to have it.
     
  6. Exxon-08
    OP

    Newcomer Exxon-08 Newbie

    Joined:
    Dec 15, 2008
    Messages:
    6
    Country:
    Norway
    Alright. Your effort is highly appropriated, thanks!. I think I replied too fast. Anyway,.. I'm am doing the method 2 right now :)

    For everyone else:
    Cyan pretty much covered it.
     
  7. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,417
    Location:
    Engine room, learning
    Country:
    France
    About choosing a loader, they are all pretty much doing the same things.
    It's just a matter of taste about the look and settings.

    You should try them to decide the one you prefer.
     
  8. WiiPower

    Member WiiPower GBAtemp Guru

    Joined:
    Oct 17, 2008
    Messages:
    8,165
    Country:
    Germany
    cIOS rev15 should cause lots of 001 errors on recent games btw. To run the retail disc you need to get to know which IOS the game wants, and then install the latest version of that. Oh and priiloader and the disc update block hack.
     
  9. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,417
    Location:
    Engine room, learning
    Country:
    France
    I thought you wanted to backup your game on HDD and use an USBloader (as you talked about HDD).

    But if you want to use your original disc without updating your Wii, then there are different way to do that.
    1. Like wiipower said, you can use Priiloader to enable "Disc update block" and prevent the game from asking you to update.
    Zelda require IOS56 to boot correctly, you already have it (though, it seems it has been patched, maybe you used PimpMyWii once? It shouldn't pose any problem)


    2. You can also use a Disc loader (homebrew) to launch your disc.
    either a USBloader, as they can also run discs, or a specific disc launcher, like TinyLoad
     
  10. Darkmatter5

    Newcomer Darkmatter5 Member

    Joined:
    Sep 21, 2009
    Messages:
    13
    Country:
    United States
    Okay I'm incredibly noob and need help. I've attempted to follow the instructions on this post, but Skyward Sword still isn't starting. I'm using WiiFlow, but not sure of the version. When I attempt to run the game through WiiFlow the screen goes black, like it's about to run, but it never does.

    Here's my config info

    sysCheck v2.1.0b13 by Double_A and R2-D2199
    ...runs on IOS61 (rev 5405).

    Region: NTSC-U
    System Menu 4.0/4.1U (v54449)
    Priilaoder installed
    Homebrew Channel 1.0.8 running on IOS61
    Hollywood v0x11
    Console ID: 82419899
    Boot2 v4
    Found 100 titles.
    Found 47 IOS on this console. 4 of them are stub.

    IOS3 (rev 65280): Stub
    IOS4 (rev 65280): Stub
    IOS9 (rev 54321): Trucha Bug
    IOS10 (rev 768): Stub
    IOS11 (rev 54321): Trucha Bug
    IOS12 (rev 269): No Patches
    IOS13 (rev 273): No Patches
    IOS14 (rev 520): No Patches
    IOS15 (rev 523): No Patches
    IOS16 (rev 54321): Trucha Bug ES Identify Flash Access NAND Access
    IOS17 (rev 775): No Patches
    IOS20 (rev 54321): Trucha Bug
    IOS21 (rev 782): No Patches
    IOS22 (rev 1037): No Patches
    IOS28 (rev 1550): No Patches
    IOS30 (rev 54321): Trucha Bug
    IOS31 (rev 3349): No Patches
    IOS33 (rev 3091): No Patches
    IOS34 (rev 3348): No Patches
    IOS35 (rev 3349): No Patches
    IOS36 (rev 54321): Trucha Bug ES Identify NAND Access
    IOS37 (rev 3612): Trucha Bug
    IOS38 (rev 3867): No Patches
    IOS50 (rev 54321): Trucha Bug
    IOS51 (rev 4864): Stub
    IOS53 (rev 5149): Trucha Bug
    IOS55 (rev 5149): Trucha Bug
    IOS56 (rev 5146): Trucha Bug
    IOS57 (rev 5661): No Patches
    IOS60 (rev 54321): Trucha Bug
    IOS61 (rev 5405): No Patches
    IOS70 (rev 54321): Trucha Bug
    IOS80 (rev 54321): Trucha Bug
    IOS90 (rev 54321): Trucha Bug
    IOS202[60] (rev 65535 Info: hermes-v5.1): Trucha Bug NAND Access USB 2.0
    IOS222[38] (rev 65535 Info: hermes-v4.0): Trucha Bug ES Identify NAND Access USB 2.0
    IOS223[38] (rev 65535 Info: hermes-v4.0): Trucha Bug ES Identify NAND Access USB 2.0
    IOS224[57] (rev 65535 Info: hermes-v5.1): Trucha Bug NAND Access USB 2.0
    IOS236 (rev 54321): Trucha Bug ES Identify NAND Access
    IOS245[37] (rev 21007 Info: d2x-v7beta1d): Trucha Bug NAND Access USB 2.0
    IOS246[38] (rev 21007 Info: d2x-v7beta1d): Trucha Bug ES Identify NAND Access
    IOS247[53] (rev 21007 Info: d2x-v7beta1d): Trucha Bug NAND Access USB 2.0
    IOS248[55] (rev 21007 Info: d2x-v7beta1d): Trucha Bug NAND Access USB 2.0
    IOS249[56] (rev 21007 Info: d2x-v7beta1d): Trucha Bug NAND Access USB 2.0
    IOS250[57] (rev 21007 Info: d2x-v7beta1d): Trucha Bug NAND Access USB 2.0
    IOS251[58] (rev 21007 Info: d2x-v7beta1d): Trucha Bug NAND Access USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v65535

    Report generated on 2011/11/20.


    Thanks in advance!
     

Share This Page