Homebrew Official [Download] Decrypt9 - Open Source Decryption Tools (WIP)

[d0k3]

I noticed that as well, it's a minor issue though and happened with the four carts I dumped earlier, another thing I noticed is that I couldn't get this release the work on my O3DS it always gives me a black screen, the previous one is working fine though.

Forgot to reply to this. There is a problem with certain entrypoints and D9 right now. The fix would have to be done on the side of the entrypoints, not in D9. A9LH will work anywhere. As a workaround, load some ARM9 bootloader first, then load the D9 payload.

 

[masterchan777]

Forgot to reply to this. There is a problem with certain entrypoints and D9 right now. The fix would have to be done on the side of the entrypoints, not in D9. A9LH will work anywhere. As a workaround, load some ARM9 bootloader first, then load the D9 payload.

Thank you @d0k3 ,tested the new build on my N3ds and the dumped CIAs now show meta info, will try to get it to work on the O3DS. Thanks for this excellent work.

 

[jimmyleen]

Using D9 to convert cart dumps to cia turns me on faster than a electric car.


Edit: TMI

 

[jimmyleen]

Okay, here's a new test build (or compile yourself from ciaconvfix branch):
https://transfer.sh/D6nZK/decrypt9wip-20160805-161051.zip

This includes support for zerokey crypto conversion and CIA metadata. Please test and give me feedback!

When I load HBL and try to boot into D9 all I get is a red screen, and than HBL returns me to the main menu.

 

[tiduscrying]

When I load HBL and try to boot into D9 all I get is a red screen, and than HBL returns me to the main menu.

What is your firmware version? AFAIK, you can't run the .3dsx versions via HBL on any firmware >9.2

 

[jimmyleen]

What is your firmware version? AFAIK, you can't run the .3dsx versions via HBL on any firmware >9.2

Come to think of it ever since I installed HBL on my 11.0 3ds I have not been able to run any .3dsx homebrew, okay I will run the bin version of D9 instead.

--------------------- MERGED ---------------------------

And just like that the bin version works, party time!

 

[Suicuark]

Do you mean 10.3? I'm pretty sure 11.0 is the latest version.

Yes Yes i just say 3 cuz it is 11.0-33 so...

 

[Giodude]

Not sure if this is the right place to ask, but i've used the classic way of installing a9lh for a while, and im trying the new way now. I have a rednand, but how do i back it up? Decrypt9 let's me backup sysnand and emunand, but if i backup emunand will it still be a rednand? (keep in mind i still have no idea what a rednand is im used to downgrading an emunand and flashing)

 

[KunoichiZ]

Not sure if this is the right place to ask, but i've used the classic way of installing a9lh for a while, and im trying the new way now. I have a rednand, but how do i back it up? Decrypt9 let's me backup sysnand and emunand, but if i backup emunand will it still be a rednand? (keep in mind i still have no idea what a rednand is im used to downgrading an emunand and flashing)

Yes, just pretend it says RedNAND instead of emuNAND.

 

[Zeriel]

So i can't find any installation info anywhere, I put the Decrypt9 Folder inside the sd/3ds folder and the rest of the files in the root
but It wont launch from the Homebrew Menu

 

[GerbilSoft]

Latest commit of Decrypt9WIP has NDS dumping. I was trying to implement this myself a while back but couldn't get the KEY1 commands working

For DSi, there's two things needed:

1. After dumping the DS secure area using command 3C, reset the cartridge and dump the DSi area using command 3D.
2. Use the DSi Blowfish key when dumping the DSi secure area. (It's present somewhere in itcm.)

 

[Inochi.no.Zenmai]

NDS dumps look good. Only tested two with DeSmuME, Pokemon Platinum and White 2. The last one is DSi enhanced, so according to what I saw, I guess that doesn't come with the ROM (DeSmuME does not load the DSi features on this one). Don't know if I'm wrong.

 

[GerbilSoft]

I attempted to add DSi support, but the DSi secure area isn't being read properly, and there's no known good dump of this ROM. (System Flaw, USA)

https://github.com/GerbilSoft/Decrypt9WIP/tree/twldump has my preliminary test version with an attempt to add support for DSi-enhanced (and DSi-exclusive) cartridges. The DSi secure area is definitely not working right, but I'm not sure about the rest of it. (It's also not reading the extra data in the cartridge header, since it's showing the TWL used data as 0 MB.)

 

[Zeriel]

Could someone please help me? I can't get this to run on
Reinand, Emunand 11.0.33, with Homebrew Menu and I'm not sure
of the installation/additional folders, I just want to make some Xorpads

 

[gnmmarechal]

Could someone please help me? I can't get this to run on
Reinand, Emunand 11.0.33, with Homebrew Menu and I'm not sure
of the installation/additional folders, I just want to make some Xorpads

huh, you have to run it from SysNAND homebrew menu iirc if you don't have Arm9LoaderHax (if you did, you'd run the payload as any other a9lh payload).

 

[Columbo2811]

Could someone please help me? I can't get this to run on
Reinand, Emunand 11.0.33, with Homebrew Menu and I'm not sure
of the installation/additional folders, I just want to make some Xorpads

Yes as above. It won't run from anything over 9.2 from homebrew launcher. You need to run it from system NAND

 

[Zeriel]

huh, you have to run it from SysNAND homebrew menu iirc if you don't have Arm9LoaderHax (if you did, you'd run the payload as any other a9lh payload).

Yes as above. It won't run from anything over 9.2 from homebrew launcher. You need to run it from system NAND

Ah, so is there anyway to create Xorpads from Emunand? Since I no longer have Cubic Ninja and have no other entry into Sysnand

 

[ihaveahax]

Ah, so is there anyway to create Xorpads from Emunand? Since I no longer have Cubic Ninja and have no other entry into Sysnand
My sysnand is 9.0.20 and Emunand 11.0.33

you can just do all of that in sysnand using your existing entry point. or the browser, if you don't have menuhax already.

also, xorpads for what?

 

[Zeriel]

you can just do all of that in sysnand using your existing entry point. or the browser, if you don't have menuhax already.

also, xorpads for what?

I'm just trying to convert a .3DS into a CIA and I used to do it with Cubic Ninja but I have no idea how to do it now that I had to return the game, also I don't have Menuhax or anything installed into Sysnand since it's so risky

 

[Columbo2811]

I'm just trying to convert a .3DS into a CIA and I used to do it with Cubic Ninja but I have no idea how to do it now that I had to return the game, I don't have Menuhax or anything installed into Sysnand since it's so risky

Use browserhax in system NAND for homebrew launcher.