Toggle sidebar

Homebrew Official [Download] Decrypt9 - Open Source Decryption Tools (WIP)

  • Thread starter Thread starter d0k3
  • Start date Start date
  • Views Views 935,416
  • Replies Replies 4,476
  • Likes Likes 71
cearp said:
you can install this - https://github.com/yellows8/hblauncher_loader/releases
to get the hb menu from the home menu :)
Click to expand...

yeah i know about the hblauncher loader, but, first of all, the OP specifically said that it needs to be run from sysnand.

now, back to what i asked, decrypt9 uses a launcher.dat in order to run, just like gateway does, right now to run it, i have to replace the gateway launcher with the decrypt9 and then change it back.

is there a way to modify the 3dsx of gateway or decrypt9 so that one of them point somewhere other than launcher.dat?
 
Altairseven said:
yeah i know about the hblauncher loader, but, first of all, the OP specifically said that it needs to be run from sysnand.

now, back to what i asked, decrypt9 uses a launcher.dat in order to run, just like gateway does, right now to run it, i have to replace the gateway launcher with the decrypt9 and then change it back.

is there a way to modify the 3dsx of gateway or decrypt9 so that one of them point somewhere other than launcher.dat?
Click to expand...
Go read the gigantic README! on github or included in the release zip, it has all your answers. Clearly you haven't read it. ;)
 
  • Like
Reactions: klear
Altairseven said:
yeah i know about the hblauncher loader, but, first of all, the OP specifically said that it needs to be run from sysnand.

now, back to what i asked, decrypt9 uses a launcher.dat in order to run, just like gateway does, right now to run it, i have to replace the gateway launcher with the decrypt9 and then change it back.

is there a way to modify the 3dsx of gateway or decrypt9 so that one of them point somewhere other than launcher.dat?
Click to expand...
how do you load gw? you say launcher.dat i think, so i recommend you set up menuhax or a9lh, with those you can add a 'boot menu' that lets you select what you want to run. gateway, decrypt9, emulators... etc
 
Idk if it's been solved yet, but I just get a red screen on the bottom and it crashes back to the hbl.
N3DS Aureinand 10.7
really need help with this..
 
Mr.ButtButt said:
Idk if it's been solved yet, but I just get a red screen on the bottom and it crashes back to the hbl.
N3DS Aureinand 10.7
really need help with this..
Click to expand...
Need more info.
How are you loading this? Are you using it as a CIA? Are you using your boot manager to load the .dat version?
 
  • Like
Reactions: Mr.ButtButt
Ok so im on AL9H v5.0, and need to boot to decrypt9WIP, i want to have it so if i hold start on boot it will load decrypt9.

I have renamed the arm9loaderhax.bin file to AuReiNAND.bin on the SD card and have copied over 'arm9loaderhax.bin' & 'a9lh.cfg' along with Decrypt9.bin from the Decrypt9WIP zip file to the root of the SD card.

This is the a9lh.cfg file....

Code: 
; CtrBootManager configuration file

[general]        ; General configuration
timeout = 3        ; Default timeout in seconds (-1 = disable autoboot)
recovery = 2            ; Hold this key to enter the menu (SELECT) (keycode: https://goo.gl/4XLDIL)
default = 0             ; Default boot entry

[theme]                     ; theme use RGB colors
bgTop1 = 000000             ; top gradient 1 (BLACK)
bgTop2 = 000000             ; top gradient 2 (BLACK)
bgBottom = 000000           ; bottom color (BLACK)
highlight = dcdcdc          ; selection highlight box (WHITE/GREY)
borders = ffffff            ; borders color (WHITE)
font1 = ffffff              ; default font (WHITE)
font2 = 000000              ; selected font (BLACK)
bgImgTop = /bgTop.bin       ; 400x240 pixels (https://xem.github.io/3DShomebrew/tools/image-to-bin.html)
bgImgBot = /bgBot.bin       ; 320x240 pixels

[entry]
title =    AuReiNand    ;
path =    /AuReiNand.bin    ;
offset = 0        ;
key = -1        ; Key to override default boot entry (NONE). Don't remove, must be last entry !

[entry]
title =    Cakes        ;
path =    /Cakes.bin    ;
offset = 0        ;
key = -1        ; Key to override default boot entry (NONE). Don't remove, must be last entry !

[entry]
title =    Decrypt9            ;
path =    /Decrypt9WIP.bin  ;
offset = 0                  ;
key = 3                     ; Key to override default boot entry (START). Don't remove, must be last entry !

so i believe from that if i hold down nothing on boot it should boot AuReiNand.bin which is the a9lh cfw (so should boot as normal) and if i hold start it should boot decrypt9WIP.bin.

Is this correct or have i overlooked something?
 
Last edited by lettuce,
Xenosaiga said:
Need more info.
How are you loading this? Are you using it as a CIA? Are you using your boot manager to load the .dat version?
Click to expand...
didn't know there was a cia version of this. I tried running it through the hbl on both sysnand and emunand, neither worked
 
Mr.ButtButt said:
didn't know there was a cia version of this. I tried running it through the hbl on both sysnand and emunand, neither worked
Click to expand...
There isn't a cia version of this. It was just an example question. And no idea about the .3dsx version. I haven't used it in a long time since setting up A9LH. I stick with the .bin file for launching at boot.
 
  • Like
Reactions: Mr.ButtButt
Xenosaiga said:
There isn't a cia version of this. It was just an example question. And no idea about the .3dsx version. I haven't used it in a long time since setting up A9LH. I stick with the .bin file for launching at boot.
Click to expand...
how to you have alternate options for things at launch
all i have are emunand and sysnand
 
Xenosaiga said:
Do you have A9LH?
Click to expand...
yeah
do i what do i put in the payloads folder?
i've been poking around but idk what to put in there.
i had put Decrypt9WIP.bin in there and renamed it to l.bin so that it loads with left, but it just loads the emunand..
 
axewfious said:
an even easier option would be getting CTRBootManager9, you wont have to remember what payload is set to launch what and just select it from the screen
Click to expand...
very true, but i do like the express straight bootup of a9lh
if not i'd still have menuhax xp
also i assigned the .bin to right.bin aaaaaaand, nothing...
 
@Mr.ButtButt
image.jpg
Here's how I have mine named. Yes I know I have two D9 files, but a default.bin is REQUIRED and I find it easier to load from th d-pad. The THIS = THAT files are empty files that I use to distinguish what is what.
 
  • Like
Reactions: Mr.ButtButt
So since Steveice has figured out NAND access from Arm11, would it actually be possible to recode this into a cia-feasible version now?

(would probably neccessitate a complete rewrite that's not worth the effort if so, but just wanna know if it's possible)
 
Last edited by Xenosaiga,

Site & Scene News

Go to forum More news

Popular threads in this forum

Why did the price of 3ds shoot up ?

Hacking Homebrew Project  BlazerTube - a YouTube 3DS revival using the REAL app!

Problems getting Homebrew to appear outside of the Homebrew Launcher (homebrew won't appear on the HOME menu)

Homebrew app Emulator  [Release] 3DS-CLI - Run a real RISC-V Linux environment on the Nintendo 3DS

Website for finding alternative games for 3DS

Hardware  2 Broken 3DSes, need help

Gaming  any good rpgs on 3ds?

Hacking  Modding Reassurance