Hardware Degrading laser?

  • Thread starter Thread starter Talaria
  • Start date Start date
  • Views Views 2,358
  • Replies Replies 13

Talaria

...
Member
Joined
Jan 31, 2007
Messages
584
Reaction score
3
Trophies
1
Location
...
Website
Visit site
XP
280
Country
New Zealand
I often here about how the backups shorten the Wii's laser when its modded. I was just wondering how quickly does the laser degrade. Like will it be ruined at the end of 1 year or 2 or who knows
wacko.gif
?

Thanks
 
no way to know for sure. too many variables. just play it 'til it dies! and worry about it then
smile.gif
replacement lasers are about the price of a game, and we know you're saving money on those
wink.gif
 
Bob Loblaw said:
no way to know for sure. too many variables. just play it 'til it dies! and worry about it then
smile.gif
replacement lasers are about the price of a game, and we know you're saving money on those
wink.gif

Yep but it seems hard to replace the laser for amators like me and lots of other people
 
"the laser" as in what is used to read data off the game DVDs

a chip won't affect the laser's life, technically. it would be using recordable media. However, I don't believe it will make a noticeable difference, if at all. Of course people tend to have their own opinions on the matter.
 
robi said:
"the laser" as in what is used to read data off the game DVDs

a chip won't affect the laser's life, technically. it would be using recordable media. However, I don't believe it will make a noticeable difference, if at all. Of course people tend to have their own opinions on the matter.

Yeah I think so too. Wii's die left right and center. No matter what. So if your laser dies you probably won't ever know for sure if it's because of the media you're using.

Anyway I wouldn't worry about it too much. It's a waste of time which you could use on playing games
biggrin.gif
 
berlinka said:
robi said:
"the laser" as in what is used to read data off the game DVDs

a chip won't affect the laser's life, technically. it would be using recordable media. However, I don't believe it will make a noticeable difference, if at all. Of course people tend to have their own opinions on the matter.

Yeah I think so too. Wii's die left right and center. No matter what. So if your laser dies you probably won't ever know for sure if it's because of the media you're using.

Anyway I wouldn't worry about it too much. It's a waste of time which you could use on playing games
biggrin.gif

i concur. the ironic part is that nintendo stayed away from cd and dvd media for so long, and now that they've embraced it, it's causing the most of the wii's problems, whether it's the laser, an eject mechanism, or whatever.

the wii is the least reliable piece of hardware nintendo's ever released with the original nes coming in a close second (hey, at least blowing on the original carts worked most of the time)
smile.gif
 
Ha!! someone also blowed the carts too!! And I thought it was just me... lol
Laser degrading is not nice... a part like this should be very very very very expensive around here...
 
zajoao said:
Ha!! someone also blowed the carts too!! And I thought it was just me... lol
Laser degrading is not nice... a part like this should be very very very very expensive around here...

Dude, I think everyone blew in the carts...
I know that my brother and I thought we came up with it for a long time, but everyone kinda figured it out at the same time.

Additionally, I thought that my brother I came up with the whole idea to put another cartridge on top of the cartridge that you were playing to get some games to work.... but I came to realize that others were doing it too.

Anyhow, as for the laser, if you guys are concerned about, im sure the less technical savvy type of person can hire some off of craigslist to repair it. go to your local craigslist city and type in wii repair. you probably will get some hit.

Good Luck.
 
I've got a question about my laser and I think it will fit in here.

When I play Metroid Prime 3, the laser is almost always toccing. Should I not worry or should I stop? If I stop, then what is the cause?

Thanks.
 
About laser degrading.

No two electrical components are alike.
The laser diode and photo transistor/diode are semiconductors, and ALL semiconductors will lead more current the warmer they get, After a while (couple of 1000 hrs most likely) the surface of the laser diode will get matted, and some af the laser radiation will be reflected back into the diode and cause some heating of it , hence;let more current through it.
The diode will gradually get more matted and cause more internal heating until the current will pass a preset value of a protective circuit that will limit the current/voltage to the laser drive and the diode will seice working. this is to protect the surounding electronics from damage incase of overcurrent.

//jonas7611, electronics engineer
 
sid0101 said:
zajoao said:
Ha!! someone also blowed the carts too!! And I thought it was just me... lol
Laser degrading is not nice... a part like this should be very very very very expensive around here...

Dude, I think everyone blew in the carts...
I know that my brother and I thought we came up with it for a long time, but everyone kinda figured it out at the same time.

Additionally, I thought that my brother I came up with the whole idea to put another cartridge on top of the cartridge that you were playing to get some games to work.... but I came to realize that others were doing it too.

Anyhow, as for the laser, if you guys are concerned about, im sure the less technical savvy type of person can hire some off of craigslist to repair it. go to your local craigslist city and type in wii repair. you probably will get some hit.

Good Luck.

You know that blowing on the cartridges is actually bad for them? The condensation in your breath would actually slightly damage the terminals. The only thing that made the games work again, was more likely the fact that you took the game out, and put it straight back in, not the blowing. In some cases though, the blowing would fix it, but would also cause more damage. You'd be better using a brush...
 
sid0101 said:
zajoao said:
Ha!! someone also blowed the carts too!! And I thought it was just me... lol
Laser degrading is not nice... a part like this should be very very very very expensive around here...

Dude, I think everyone blew in the carts...
I know that my brother and I thought we came up with it for a long time, but everyone kinda figured it out at the same time.

Additionally, I thought that my brother I came up with the whole idea to put another cartridge on top of the cartridge that you were playing to get some games to work.... but I came to realize that others were doing it too.

Anyhow, as for the laser, if you guys are concerned about, im sure the less technical savvy type of person can hire some off of craigslist to repair it. go to your local craigslist city and type in wii repair. you probably will get some hit.

Good Luck.


I never put another cartridge on top of it. I just used the black sleeve in which the game was stored. Worked like a charm
wink.gif


Volkov said:
sid0101 said:
QUOTE(zajoao @ Mar 17 2008, 11:41 PM)
Ha!! someone also blowed the carts too!! And I thought it was just me... lol
Laser degrading is not nice... a part like this should be very very very very expensive around here...

Dude, I think everyone blew in the carts...
I know that my brother and I thought we came up with it for a long time, but everyone kinda figured it out at the same time.

Additionally, I thought that my brother I came up with the whole idea to put another cartridge on top of the cartridge that you were playing to get some games to work.... but I came to realize that others were doing it too.

Anyhow, as for the laser, if you guys are concerned about, im sure the less technical savvy type of person can hire some off of craigslist to repair it. go to your local craigslist city and type in wii repair. you probably will get some hit.

Good Luck.

You know that blowing on the cartridges is actually bad for them? The condensation in your breath would actually slightly damage the terminals. The only thing that made the games work again, was more likely the fact that you took the game out, and put it straight back in, not the blowing. In some cases though, the blowing would fix it, but would also cause more damage. You'd be better using a brush...

Uh... well, yeah, the condensation is bad, but back then, no one cared about that. It cleaned it out, and it worked. As well, i never had a cart stop working due to that while it was still the current system. Hell, even now if i'd have it, i'd still blow. There's nothin better than a game not working, pulling it out, making that "Faaaawifffff Faaaawifffffff" noise with your mouth in front of the cart, putting it back in, and BAM it works.
 

Site & Scene News

Popular threads in this forum