Hi guys!
I found an old v1 with broken type-c port, I have installed a new one and now the console boot but charge only on one side.
I tested the vbus and voltage around m92t36 and all seem to be ok on two sides. The vbus just of the top of the port is ok too.
I have no voltage on battery connector on the faulted side.
The BQ24193 get no good voltage on the faulted side.
Other strange thing is the capacitor on the photo (marked as red) it seems open on two side, normal?
Do you think that I have to change the BQ24193? If you have idea of other tests...
EDIT: I have tested the capacitor on an other switch and the result is the same
I found an old v1 with broken type-c port, I have installed a new one and now the console boot but charge only on one side.
I tested the vbus and voltage around m92t36 and all seem to be ok on two sides. The vbus just of the top of the port is ok too.
I have no voltage on battery connector on the faulted side.
The BQ24193 get no good voltage on the faulted side.
Other strange thing is the capacitor on the photo (marked as red) it seems open on two side, normal?
Do you think that I have to change the BQ24193? If you have idea of other tests...
EDIT: I have tested the capacitor on an other switch and the result is the same
Attachments
Last edited by RoXuS,
