Hacking CFG Loader very slow to load

  • Thread starter Thread starter Futurdreamz
  • Start date Start date
  • Views Views 5,250
  • Replies Replies 16

Futurdreamz

Well-Known Member
Member
Joined
Jun 15, 2014
Messages
2,276
Solutions
1
Reaction score
1,395
Trophies
2
Age
34
XP
2,183
Country
Canada
I had used the Lego Starwars jailbreak to install homebrew, then installed Nintendon't, CFG loader, and a channel launcher for CFG Loader to stick on my vWii's home. It is all set up and works, but CFG is VERY slow to start. I click on the launcher and hit start, and then it spends about a minute or two on the blue screen saying that it's loading files, before FINALLY going to the loader.

I have everything on a 64GB SD card, and while I have a USB drive for Wii U games I have CFG explicitly set to look only at the SD card.

Any help would be appreciated. I can upload a dump of my SD card directory (excluding games) if you want.
 
If I were you, I'd use WiiFlow. It's much better. Also, don't put all your games on the sd card! Use a external hdd or a flash drive. Loaders have a hard time pulling backups from the sd.

--------------------- MERGED ---------------------------

Also, why would you even use a disc jailbreak? Those are unecessary, as there is an easier way to install homebrew called the "letterbomb" method. It's easy af and free too! It takes less than 5 minutes to install homebrew and bootmii with that method!
 
Letterbomb does not work on Wii U. Sorry, the homebrew is on the vWii side so I thought asking here would be more appropriate.

I can try WiiFlow again, I remember dismissing it but I can't remember why.
 
Letterbomb does not work on Wii U. Sorry, the homebrew is on the vWii side so I thought asking here would be more appropriate.

I can try WiiFlow again, I remember dismissing it but I can't remember why.
oh crap, thought this was about the wii. Sorry, I know nothing about vWii, but @GreyWolf might know.
 
Try disconnecting your WiiU-formatted drive and see if that changes anything. If not, run SysCheck and post the .csv file (in spoiler tags.)
 
Code:
SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on vIOS58 (rev 6432).

Region: NTSC-U
System Menu 4.3U (v609)

Drive date: 06.28.2011
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x21
Console ID: 608277669
Console Type: vWii
Shop Channel Country: Canada (18)
Boot2 v0
Found 92 titles.
Found 34 IOS on this console. 0 of them are stubs.

vIOS9 (rev 1290): No Patches
vIOS12 (rev 782): No Patches
vIOS13 (rev 1288): No Patches
vIOS14 (rev 1288): No Patches
vIOS15 (rev 1288): No Patches
vIOS17 (rev 1288): No Patches
vIOS21 (rev 1295): No Patches
vIOS22 (rev 1550): No Patches
vIOS28 (rev 2063): No Patches
vIOS31 (rev 3864): No Patches
vIOS33 (rev 3864): No Patches
vIOS34 (rev 3864): No Patches
vIOS35 (rev 3864): No Patches
vIOS36 (rev 3864): No Patches
vIOS37 (rev 5919): No Patches
vIOS38 (rev 4380): No Patches
vIOS41 (rev 3863): No Patches
vIOS43 (rev 3863): No Patches
vIOS45 (rev 3863): No Patches
vIOS46 (rev 3863): No Patches
vIOS48 (rev 4380): No Patches
vIOS53 (rev 5919): No Patches
vIOS55 (rev 5919): No Patches
vIOS56 (rev 5918): No Patches
vIOS57 (rev 6175): No Patches
vIOS58 (rev 6432): USB 2.0
vIOS59 (rev 9249): No Patches
vIOS62 (rev 6942): No Patches
vIOS80 (rev 7200): No Patches
vIOS249[56] (rev 21010, Info: d2x-v10beta53-alt-vWii): NAND Access, USB 2.0
vIOS250[57] (rev 21010, Info: d2x-v10beta53-alt-vWii): NAND Access, USB 2.0
vIOS251[58] (rev 21010, Info: d2x-v10beta53-alt-vWii): NAND Access, USB 2.0
vIOS512 (rev 7): No Patches
vIOS513 (rev 1): No Patches
Report generated on 01/16/2013.

WiiFlow boots immediately, but I have to download covers and figure out why it can't find my gamecube games. I'll probably use it instead then
 
Last edited by Futurdreamz,
That looks fine. It could just be an issue with CFG Loader, then. It hasn't been updated in quite a while now.
 
I ended up just purging it and and installing the WiiFlow multimod suite. I have to figure out how to enable n64 games, but already it performs better than my old version of WiiFlow and nintendont.
 
If I were you, I'd use WiiFlow. It's much better. Also, don't put all your games on the sd card! Use a external hdd or a flash drive. Loaders have a hard time pulling backups from the sd.
It could just be an issue with CFG Loader, then. It hasn't been updated in quite a while now.
CFG runs perfectly fine on my WiiU, but I use a USB HDD, not an SD card.
CFG Loader has no issues on my vWii loading games stored on the SD card. CFG Loader (70r78.10) loads in about 10 seconds from hitting Start on the channel forwarder, and only takes 5 seconds to boot into a game.

WiiFlow on the other hand takes 30 seconds to load, and another 30 seconds to boot into games. Seems like it's a well-known issue with WiiFlow and a SD card only configuration.

Problably. And here's my card dump, any advice as to what I can actually delete and if anything eeds to be updated? I don't even know what's going on in it anymore except that it works
Looking at config.txt under /usb-loader/, you have "device = usb", when it should be "device = sdhc". That might be causing the large loading time.
 
That would do it. I changed it within CFG but I guess I had to use a text editor. That would've saved me some time.

As it is, Wiiflow launches very fast. I'm not fully satisfied with having to click on that fiddly toggle to cycle through everything just to switch to Gamecube games, but my setup works - and works better than it did before - so I'm not going to futz with it. I'll change that setting in the backup in case Wiiflow borks though.

Thanks for the help.
 
That would do it. I changed it within CFG but I guess I had to use a text editor. That would've saved me some time.

As it is, Wiiflow launches very fast. I'm not fully satisfied with having to click on that fiddly toggle to cycle through everything just to switch to Gamecube games, but my setup works - and works better than it did before - so I'm not going to futz with it. I'll change that setting in the backup in case Wiiflow borks though.

Thanks for the help.

Click B on the source button and you'll get a menu to pick which one you want. :)
 
That would do it. I changed it within CFG but I guess I had to use a text editor. That would've saved me some time.

As it is, Wiiflow launches very fast. I'm not fully satisfied with having to click on that fiddly toggle to cycle through everything just to switch to Gamecube games, but my setup works - and works better than it did before - so I'm not going to futz with it. I'll change that setting in the backup in case Wiiflow borks though.

Thanks for the help.
Press 1 to change the way games are shown. You can even change it to show like 40 games at once.
 

Site & Scene News

Popular threads in this forum