pspmte said:Comon guys give is a guide to this is english not with bits missing
Pacman i have got as far as you have lol
Wiigator does this work?
thanksWiiGator said:pspmte said:Comon guys give is a guide to this is english not with bits missing
Pacman i have got as far as you have lol
Wiigator does this work?
Sorry, I forget that you will need also the following file:
/00000001/00000024/v1042/cetk
1. Copy http://nus.cdn.shop.wii.com/ccs/download/0...0100000024/cetk to SD /00000001/00000024/v1042/cetk
2. Copy http://nus.cdn.shop.wii.com/ccs/download/0...000024/00000004 to SD /00000001/00000024/v1042/00000004
3. Get a tool for extracting WAD files (I assume that the WAD Unpacker will work http://www.elotrolado.net/hilo_bfgr-wadtools-v036_1010150 , on Linux you can use zeventig from http://git.infradead.org/users/segher/wii.git )
4. Get a backup copy of a game and extract the file BOOT2-v2-64.wad.out.wad (on Linux you can use negentig from http://git.infradead.org/users/segher/wii.git )
5. Extract the file BOOT2-v2-64.wad.out.wad and copy the files to the SD card. You will get the following directory tree on the SD card:
/00000001/00000001/v2/00000000.app
/00000001/00000001/v2/cetk
/00000001/00000001/v2/tmd.2
You may need to rename "tik" to "cetk".
You may need to rename "tmd", "title.tmd" or "tmd.title" to "tmd.2"
WiiGator said:pika9323 said:Yeah ok thanks but i got stuck at a new problem.
When i boot my Wii with the files on SD Card:
Cboot dol loader
IOS Version 36 v7 0x00240007
IOS sucessfully loaded
Sdio_Startup() rv=0
fat _driver: disk init failed
Init Fat driver failed
Failed to load boot.dol from front sd reader.
I even formatted my SD Card with SD Formatter (it performs a low level format if i remember right) but it still doesnt work.
The cause for "Sdio_Startup() rv=0" is lost IPC messages, because the PowerPC initialization is not complete and I may forgot something. When you see messages on the screen, the Starlet has already transfered data from the SD card. This problem occurs for me only if Bootmii is started as IOS (e.g. started from HBC).
Note: The program will try to download Boot2 from internet, but this is not available on the Nintendo servers. The file 00000004 was also used for the Backup Launcher 0.3 Gamma installation.
Cboot dol loader
IOS Version 36 v7 0x00240007
IOS sucessfully loaded
Sdio_Startup() rv=0
fat _driver: disk init failed
Init Fat driver failed
Failed to load boot.dol from front sd reader.
pika9323 said:How do go:
First install Bootmii.
If you can as Boot2 if you cant as IOS.
Prepare the SD Card for Bootmii.
Then go to your PC and save the folder Bootmii.
Now:
The package on the first page is for Bootmii as Boot2.
The package at post #26 is for Bootmii as IOS.
Get the package and prepare the files.
Now start Homebrewchannel and there Cboot installer.
After it is done, it will return back to the Homebrewchannel (or Systemmenu not sure at this moment but it doesnt matter anyway).
Now turn your Wii of and turn it on.
...
n01a said:Need some help here ...
I extracted 3 different BOOT2-v2-64.wad.out.wad from 3 ISOs with Wii Scrubber than i unpacked them with wad unpacker, that gave me the following files:
00000000.app
0000000100000001.cert
0000000100000001.tik
0000000100000001.tmd
00000000.app is always the right one (sha1 checked) but I' m not able to find ther right tmd & cetk (i have never found "tmd", "title.tmd" or "tmd.title")
WiiGator said:@alp63: Did you cut the video before wad manager is started? There should be a something printed like "cBoot2 v16" and "IOS Version 36 v1042". Is this recorded using NTSC only hardware? I am asking because I don't know how this behaves on a NTSC TV.