Broken display when Picofly has SD card

[Ravenext]

After doing a replacement on the Type-C port (One side has both Data lines OL), I decided to do an install of Picofly. Turning it on, no error codes and the screen shows the "No SD Card" screen with the SD card out.

With a MicroSD card inserted with Sthetix's newest HATS, this shows up.

When Picofly is removed. Its just a blue screen

 

[jkyoho]

trace cut around cpu to RAM. take some picture around CPU with shield remove

 

[Ravenext]

trace cut around cpu to RAM. take some picture around CPU with shield remove

Wasn't able to find any cut traces between the CPU and the RAM. Instead, there was a missing capacitor and resistor that connected the MAX77812 to basically everything. But yeah, thanks for saying it was a possible trace to ram issue.
The picofly is now working perfectly.
(Was able to grab the pair from an old donor board I had to replace it)