I have a new 3ds xl 11.6.0-39U and an R4i+ 3ds/ds gold card.
Here's what I've done:
-R4 switch to N
-opened deck's sd via pc
-applied files
-put deck's sd back in
-put r4 in the correct slot (no SD card)
-ran safeB9
-power off
-eject deck sd
-switch boot.firm for luma
-insert deck sd
-run system
-show NAND
-saved
-reboot
-ALL GOOD!!
-turn device off
-deck sd to pc
-install cias as instructed
-create files as instructed
-insert deck sd
-power on deck
-launch download and play
-Rosalina process
-homebrew launched
-install cias
-ran dspi
-pressed b for self-delete and return to home menu
-launch god mode 9
-set state and time
-ran script "setup_ctrnand_luma3ds"
-Message: This will copy luma to your ctrnad allowing for system to work without an SD card. Continue?
-Press A
-Press key sequence to unlock
-Luma copied successfully
-press A
-Then it asks if to relock the write permissions.
-press A for yes
BACKUP SysNAND
-press home
-Scripts
-Back up SysNAND
-Create a back up.
-15 min later
-press A to continue
-eject sd card
-open sd on pc
-copy nandmin_###.bin
-also copied the entire sd card for back up
-reinserted card
-script
-clean up complete successfully
-press start to reboot
-system shut off
-wait 10 min
-press power button
-blue power light comes on then shuts off
-charges deck 4 hours
-press power
-blue power light comes on then shuts off
-press and hold start
-press power
-blue power light comes on then shuts off
-double check steps
-deleted .bin from gm9/out
-press power
-blue power light comes on then shuts off
-place magnet
-press and hold start, select x
-tap power button
-count 9 seconds, blue light stays on
-release all buttons and remove the magnet
-blue light shuts off after a few seconds
This process comes from http://www.r4ids.cn/r4ids-e.htm Any ideas how to save this or am I royally f'ed up.
What happened to the days when we could just put the programs and games on an SD put that SD into the R4, put the R4 card into the deck and it allowed you to play. That's what I need lol.
Resolution:
-ejected sd
-power on as normal
-inserted sd card
-updated luma
-followed on-screen prompts
-reboot deck
-normal
-power down
-waited several min
-press power
-the deck starts as normal
WOOT!! Thank you all for your help. Now to figure out the point of the r4 card now... external storage? We shall see!!
Here's what I've done:
-R4 switch to N
-opened deck's sd via pc
-applied files
-put deck's sd back in
-put r4 in the correct slot (no SD card)
-ran safeB9
-power off
-eject deck sd
-switch boot.firm for luma
-insert deck sd
-run system
-show NAND
-saved
-reboot
-ALL GOOD!!
-turn device off
-deck sd to pc
-install cias as instructed
-create files as instructed
-insert deck sd
-power on deck
-launch download and play
-Rosalina process
-homebrew launched
-install cias
-ran dspi
-pressed b for self-delete and return to home menu
-launch god mode 9
-set state and time
-ran script "setup_ctrnand_luma3ds"
-Message: This will copy luma to your ctrnad allowing for system to work without an SD card. Continue?
-Press A
-Press key sequence to unlock
-Luma copied successfully
-press A
-Then it asks if to relock the write permissions.
-press A for yes
BACKUP SysNAND
-press home
-Scripts
-Back up SysNAND
-Create a back up.
-15 min later
-press A to continue
-eject sd card
-open sd on pc
-copy nandmin_###.bin
-also copied the entire sd card for back up
-reinserted card
-script
-clean up complete successfully
-press start to reboot
-system shut off
-wait 10 min
-press power button
-blue power light comes on then shuts off
-charges deck 4 hours
-press power
-blue power light comes on then shuts off
-press and hold start
-press power
-blue power light comes on then shuts off
-double check steps
-deleted .bin from gm9/out
-press power
-blue power light comes on then shuts off
-place magnet
-press and hold start, select x
-tap power button
-count 9 seconds, blue light stays on
-release all buttons and remove the magnet
-blue light shuts off after a few seconds
This process comes from http://www.r4ids.cn/r4ids-e.htm Any ideas how to save this or am I royally f'ed up.
What happened to the days when we could just put the programs and games on an SD put that SD into the R4, put the R4 card into the deck and it allowed you to play. That's what I need lol.
Resolution:
-ejected sd
-power on as normal
-inserted sd card
-updated luma
-followed on-screen prompts
-reboot deck
-normal
-power down
-waited several min
-press power
-the deck starts as normal
WOOT!! Thank you all for your help. Now to figure out the point of the r4 card now... external storage? We shall see!!
Last edited by RozeMoon,