Search results

  1. G

    Hacking Hardware Picofly - a HWFLY switch modchip

    Decided to scrap the ribbon and just hand solder ABCD, works great now. Thanks for this amazing project
  2. G

    Hacking Hardware Picofly - a HWFLY switch modchip

    Was trying to install in my Lite today, but it boots as if there was no chip at all, just regular booting. I think the error code means no RST connected, but I pulled the flex off and double checked its not shorting on something else, so is there something else I can look at?
  3. G

    Wii U gamepad Charger fuse

    Hello, I accidentally blew the F1 charging fuse of my wii u gamepad, it charges if I bypass the fuse but I would rather properly replace the fuse and was wondering if anyone knew the spec of the original fuse?
  4. G

    Hardware Magic-NS bind joystick to d-pad

    I just bought a magic ns adapter for my switch and I want to use a wiimote but I want the dpad to bind to the left stick instead of the actual dpad. Is there a way to do this? Or do I need an 8bitdo adapter instead?
  5. G

    Hardware CPU swap between 2 consoles

    my idea was to make an unpatched erista switch lite, would be funny to see.
  6. G

    Tutorial Internal modchip - SAMD21 (Trinket M0, Gemma M0, ItsyBitsy M0 Express) Guide, Files & Support

    I figured it out, the resistor for the vol+ was burnt out. I replaced it and am now using autorcm instead of vol+ strap to prevent it from happening.
  7. G

    Tutorial Internal modchip - SAMD21 (Trinket M0, Gemma M0, ItsyBitsy M0 Express) Guide, Files & Support

    I installed the VOL + strap wire so that the switch would automatically boot to cfw, and it worked for a few days but now it won't boot cfw anymore and the vol+ button doesn't work even with the wire removed. Is the console broken now?
  8. G

    Hardware WiFi error 2110-1115

    I have a switch lite that has the error 2110-1115. I’ve rebooted it and initialized keeping save data and it didn’t work. I pulled the battery and it still didn’t work. I let the battery die, and when I charged it, wifi started working again. Unfortunately, after another reboot it has stopped...
  9. G

    Hardware Nintendo Switch, repairing damaged or lifted pads on USB-C port !

    I tried buying these and using them for usb pads but I cannot get them to stick down. I used UV curable mask and it does not cure below the pad so heat makes it move again.
  10. G

    Hardware CPU swap between 2 consoles

    Would it be possible to swap the cpu from a switch with a bad/cracked pcb to one with a shorted cpu? I know at least the nand would have to be swapped but would anything else prevent this from working?
  11. G

    Hardware No backlight Switch Lite (no 17v)

    I second what he said, My lite had the backlight trace blown on the ribbon cable, What I did until I got a replacement was run a magnet wire from the main board to the left board to get the backlight working.
  12. G

    Tutorial Switch Unbricking Guide - ProdInfo Fix (PikaFix)

    oh, i used prodinfogen to generate a new prodinfo from scratch so that's why I don't need custom exosphere. I can dm you something to add to the post to add about prodinfogen, which I see is blank in your post now, but just a note prodinfogen breaks the cart slot, unless your custom exosphere...
  13. G

    Tutorial Switch Unbricking Guide - ProdInfo Fix (PikaFix)

    Hey, just curious, why do you need a custom exosphere.bin? The way I rebuilt my nand I am able to use normal unmodified OS and normal Atmosphere just fine. auto someone I know tried to fix a patched switch with a sx core, but the sx core doesn't allow for tsec keys to be dumped so it wasn't...
  14. G

    Hardware Nintendo Switch, repairing damaged or lifted pads on USB-C port !

    hello, I am curious as to why you left out SBU2, RX1, and TX2 from the pinouts. I found where they go, but are they not necessary for anything (docking, usb bluetooth dongle, etc)?
  15. G

    Hacking Wii U upgrade 8GB emmc to 32GB emmc

    I just bought a 256gb Dramless SSD for like $26 and it is like 5x faster than the eMMC so, yeah this mod is cool to think about but since you can solder a usb ssd that is faster it probably is not worth the time.
  16. G

    Hacking Wii U upgrade 8GB emmc to 32GB emmc

    Thats actually pretty cool, I may end up doing that mod to have all my games without any external devices.
  17. G

    Hacking Wii U upgrade 8GB emmc to 32GB emmc

    Yeah I was considering a USB but I plan to bring my Wii U places (i guess I probably wont be taking it many places until corona calms down) and I want to be able to play a few games (2-3) without having to worry about loosing a USB. With just Wind Waker HD installed, 8gb is already full. Yeah...
  18. G

    Hacking Wii U upgrade 8GB emmc to 32GB emmc

    Hello, I was wondering if it is possible to upgrade the emmc of a Wii U basic/8gb model to have 32gb (or more) internal storage and using a hardmod to reflash the original nand contents. According to http://wiiubrew.org/wiki/Hardware/EMMC_NAND, the 32gb wiis use a Samsung KLMBG4GE4A-A001 or a...
  19. G

    Hacking Can someone with a banned switch help me repair mine?

    Yeah sorry i didn't post a tutorial, I wrote one up but I haven't had the chance to test it so I don't want to release it with a possible missing step.
  20. G

    Hacking RELEASE [Trinket] [Rebug] [Others] [Modchip Software] *NEW* Fusee_Suite UF2 packages

    So, I’m confused on which part to download. Do I need both parts? Or just one? My end goal for this is to have when no buttons pressed the console boots ofw, and when (probably v+) is held it boots cfw. Is that possible with this?