Toggle sidebar

ps vita fat battery connector

  • Thread starter Thread starter egamephone
  • Start date Start date
  • Views Views 8,100
  • Replies Replies 6
egamephone

egamephone

Member
Newcomer
Level 3
Joined
Jun 14, 2019
Messages
9
Reaction score
2
Trophies
0
Age
24
XP
223
Country
Australia
Is the sp65M battery connector customized by sony for psv1000? Hardly any information on him can be found. The size data of Hirose DF57H or JST are a little worse.
 
I don't know what kind of response you will get around here for such things, even for Nintendo consoles. Plenty will own micrometers and vernier callipers such that measurements could happen if that was what was needed but as far as paying attention to such things then not so much; 99% of the time if someone ripped a connector from something that turned out to be custom they would get a donor board from a dead unit or from someone that parted such a thing out, that or solder enough wires to use something less custom that either the local electronics shop sells or can be bought from the usual suspects in electronics component land.
If it was a controller, external power or video port you wanted to make custom adapters for or get some pinout data on then might get something more.

Come to think of it I am not sure there is anywhere I have been on the internet doing electronics that you are likely to get a reasonable answer from.
 
This is where I stopped looking:

I haven't bought either or fit them (I just switch the connector out for JST 2.0).

This could possible be for the SP65M?
(Used in all color besides red and blue OLED 1000 and 1100 models)
BM03B-ACHSS-GAN-TF LF SN

Possibly the connector for the SP65X?
(Used in Red and Blue 1000 and 1100 OLED Vitas, Slim Vitas and Lite Nintendo Switches).
BM03B-ADHKS-GAN-ETB LF SN
 
  • Love
Reactions: The_Dizzy_Vizzy
Anderxale said:
This is where I stopped looking:

I haven't bought either or fit them (I just switch the connector out for JST 2.0).

This could possible be for the SP65M?
(Used in all color besides red and blue OLED 1000 and 1100 models)
BM03B-ACHSS-GAN-TF LF SN

Possibly the connector for the SP65X?
(Used in Red and Blue 1000 and 1100 OLED Vitas, Slim Vitas and Lite Nintendo Switches).
BM03B-ADHKS-GAN-ETB LF SN
Click to expand...
Thanks Reply. I have tested the BM03B-ACHSS sample, its external dimensions are very similar, and the spacing is the same, 1.2. However, the height and internal structure are wrong, and the SP65M battery interface cannot be inserted. BM03B-ADHKS height 1.9 spacing 1.3, this data seems to be wrong. But I will also try to test. I just tested with SP65M battery, not according to psvita model
 
  • Like
Reactions: Anderxale
Anderxale said:
This is where I stopped looking:

I haven't bought either or fit them (I just switch the connector out for JST 2.0).

This could possible be for the SP65M?
(Used in all color besides red and blue OLED 1000 and 1100 models)
BM03B-ACHSS-GAN-TF LF SN

Possibly the connector for the SP65X?
(Used in Red and Blue 1000 and 1100 OLED Vitas, Slim Vitas and Lite Nintendo Switches).
BM03B-ADHKS-GAN-ETB LF SN
Click to expand...

Very well put. I have 3 Japanese models and two NA models. When I opened up my Vita, did not realize that I needed a different battery (SP65X) but yes, the SP65M is for the North American unit. Well played good sir! :)

EDIT: I JUST REALIZED THIS THREAD IS 4 YEARS OLD - MY BAD!!!
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew Tutorial Project  RetroFlow - Homebrew games box art collection

Vita TV Technical Issue

Repaired aliexpress 1000 3G motherboard, but the shop couldn't figure out how to fix headphone jack

PSX games without Adrenaline?

C2-12828-1 Saved Core File Succeeded

Error code C1-2613-2

disable the green light on PSvita 2000?

[WIP] PS Vita Trophy Archive Manager - Workaround for the 100 Trophy Title Limit