Toggle sidebar

Hacking Atmosphere-NX - Custom Firmware in development by SciresM

  • Thread starter Thread starter Waze0613
  • Start date Start date
  • Views Views 2,721,442
  • Replies Replies 9,253
  • Likes Likes 92
linuxares said:
Delete your Atmosphere folder, copy the new one over (1.4.0) and use the NEW fusee.bin file. You can't use the old one to boot the latest version.
Click to expand...
Sorry for a possible stupid question but i don´t think i used this "fusee.bin" in the past...

I´m looking at my last year´s files (didn´t update this year yet, planning to do it now) and the only .bin file i found to use in tegrasmash is "hekate_ctcaer_5.6.2.bin". Is this an alternative to fusee.bin? (of course i´ll use an updated version of hekate_ctcaer_5.6.2.bin when hacking with 1.4.0 atmos)
 
Donnie-Burger said:
15.01 just dropped
Click to expand...
God damn it, Donnie!


https://en-americas-support.nintend...tch-system-updates-and-change-history#current

Update history​

Ver. 15.0.1 (Released October 31, 2022)​

  • Resolved an issue causing Error Code: 2181-1000 to appear when playing DLC from a console other than your primary console.
  • Resolved an issue preventing screenshots during specific in-game scenes for some games.
  • General system stability improvements to enhance the user's experience.
Click to expand...
 
  • Like
Reactions: peteruk and Donnie-Burger
mrdude said:
Don't worry patches are the same. Also atmosphere works with it.
Click to expand...
That was fast, I’m still dumping Sysnand FW to update my Emunand.
Party’s over fellas. Nothing to see here. Move along.
Post automatically merged:

impeeza said:
a fix on, it's a new thing, they forgot the stability.
Click to expand...
Stability is in there. Last line. I have it on my Sysnand already and I think I can feel the stability a little bit.
 
Last edited by binkinator,
  • Like
  • Haha
Reactions: Tyvar1, impeeza and mrdude
binkinator said:
That was fast, I’m still dumping Sysnand FW to update my Emunand.
Party’s over fellas. Nothing to see here. Move along.
Post automatically merged:


Stability is in there. Last line. I have it on my Sysnand already and I think I can feel the stability a little bit.
Click to expand...
I've got a clean backup file based emunand that's only 999Mb which I use for such things - so I just updated that, it's not a big deal if it gets broken as I just copy it back onto the micro sdcard. Then I use a firmware dumper on the switch to dump it. It takes less than 5 minutes for the entire process.
 
  • Like
Reactions: peteruk and binkinator
mrdude said:
I've got a clean backup file based emunand that's only 999Mb which I use for such things - so I just updated that, it's not a big deal if it gets broken as I just copy it back onto the micro sdcard. Then I use a firmware dumper on the switch to dump it. It takes less than 5 minutes for the entire process.
Click to expand...
Ahhh. See, my emunand is 8G. That’s why you were faster!

No n00bs should read below this line. I’m known to do dumb shit and following me down a rabbit hole could get you or your switch hurt! Always wait for the word from SciresM before updating!

YOU HAVE BEEN WARNED

—————————————————————————————————-


You were right @mrdude !

I’m fully dumped and bumped and can confirm no issues thus far.

image.jpg

stability…ahhhh…I’m soaking in it.
Post automatically merged:


https://gbatemp.net/threads/new-nintendo-switch-update.621192/



Still no reason to update folks!
 
Last edited by binkinator,
  • Like
Reactions: laz305, SylverReZ, peteruk and 4 others
Hello! I faced an issue using my switch and I'm pretty sure it's about atmo so I want to share it here. My switch can't initialise CFW - emuNAND and CFW - sysNAND if I have clean emuMMC on my sd card. Let me explain what exactly did I do.

1)Launch semi-stock
2)Update sysNAND using Daybreak to 15.0.0 (factory reset option, FAT32 + exFAT)
3)On the next boot press VOL- to get into hekate and power off (Did not try to load sysNAND)
4)Format new sd card with Large FAT32, block size default
5)Copy to sd card "clean" set of hekate/atmo/patches etc.
6)Make SD File emuMMC on this card
7)Run CFW - emuNAND / CFW - sysNAND

Tried to launch emuNAND about 4 times and sysNAND about 3 time. Every time I try it just goes to black screen or atmo logo -> stuck on Nintendo Switch logo.

I'm not really sure if factory reset option makes my sysNAND really clean like out of box.

Finally, I just got nervous, tried to launch full stock, got Nintendo set up screen, turned off and tried again. It didn't work. Then I got through nintendo set up and made emuNAND from it and it worked.

Switch Mariko, hwfly first release, bought about an year ago.
 
idoctorhacker said:
Hello! I faced an issue using my switch and I'm pretty sure it's about atmo so I want to share it here. My switch can't initialise CFW - emuNAND and CFW - sysNAND if I have clean emuMMC on my sd card. Let me explain what exactly did I do.

1)Launch semi-stock
2)Update sysNAND using Daybreak to 15.0.0 (factory reset option, FAT32 + exFAT)
3)On the next boot press VOL- to get into hekate and power off (Did not try to load sysNAND)
4)Format new sd card with Large FAT32, block size default
5)Copy to sd card "clean" set of hekate/atmo/patches etc.
6)Make SD File emuMMC on this card
7)Run CFW - emuNAND / CFW - sysNAND

Tried to launch emuNAND about 4 times and sysNAND about 3 time. Every time I try it just goes to black screen or atmo logo -> stuck on Nintendo Switch logo.

I'm not really sure if factory reset option makes my sysNAND really clean like out of box.

Finally, I just got nervous, tried to launch full stock, got Nintendo set up screen, turned off and tried again. It didn't work. Then I got through nintendo set up and made emuNAND from it and it worked.

Switch Mariko, hwfly first release, bought about an year ago.
Click to expand...

Sounds like a bad SD, could you test using H2testW before next step?
 
  • Like
Reactions: binkinator
  • Like
Reactions: binkinator, SylverReZ and peteruk
So no need to update Atmosphere/Hekate for 15.01? It's all the same that worked for 15.0? I just want to update my sysnand.
 
Is it possible to fully disable the cartridge slot in emunand, BUT NOT in sysnand ?
Sometime when i play legit cartridge in sysnand, if i switch to emunand where the warez nsp is installed, it may conflict the files between nsp datas and cartridge.
 
I was playing dq11 in sysnand using the cartridge, and when i switch to emunand with the game still inside the switch, the warez nsp i installed became corrupted. Happens to all games installed if I have the same cartridge in the slot.
2022111100110100-57B4628D2267231D57E0FC1078C0596D.jpg
 
  • Wow
Reactions: SylverReZ

Site & Scene News

Go to forum More news

Popular threads in this forum

Feedback Homebrew  Essential Homebrew

Homebrew Tutorial Translation Project  CS2SX — Write Nintendo Switch Homebrew in C#

Homebrew Homebrew game Project  So... Dan didn't want to reveal his Vulkan, so I made mine.

Homebrew Homebrew game  Lego Star Wars: The Complete Saga · Switch Port

running 20.5 Is it worth upgrading my firmware...?

Homebrew Homebrew game  GTA: Chinatown Wars - Switch port

Hacking Hardware Misc  Yo chat! I'm I cooked?

Homebrew Homebrew game  Final Fantasy IV 3D Remake - Switch port