Homebrew A quick guide to restoring a Wii? (Removing Homebrew)

  • Thread starter Thread starter Ocarina
  • Start date Start date
  • Views Views 102,266
  • Replies Replies 37
i used the samsung bar, fat 32, and im in bootloop on wiiflow

I mean you said you changed from WBFS Manager to WiiBackupManager,your Steps please,what have you changed please.
Something has happened here when you said after that nothing has worked anymore.

Thank you.:)

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
EDIT:

I looked over Wiiflow v4.2.1 and maybe this can help you on your Issue:

On your SD Card in the Folder "apps\wiiflow" delete the wiiflow.ini and restart Wiiflow.It should re-inizialize the Loader and gives you the Chance to select your USB HDD.

Good luck
Thank you.:)
 
Hello.:)

Thank you for your Update.
I am sorry to hear it is still not working.
I read again over your Description and I have a Question please:



What have you exactly done please ?
Which USB Device did you use ?
How is it formated please ?

Thank you for your Help.:)
i used a samsung bar 64 gig usb, fat 32 format, and i made a wbfs folder on the drive and used wii backup manager to put games on it, but when wiiflow loads i get a wiiflow loading screen for a few seconds then exception error dsi and it gets stuck in a bootloop until i unplug the wii
edit: i didnt think the other message sent sorry

--------------------- MERGED ---------------------------

There is no wiiflow.ini file for me
 
Last edited by wiahh,
  • Like
Reactions: Alexander1970
Maybe the issue it's the Samsung bar itself. I read it's a flash drive. Wii and flash drives, often, don't mix.
Can you try with a USB Hard disk or a SD card?
If you have no wiiflow.ini in your apps/wiiflow folder, then most probably Wiiflow was't able to create it. This may suggest that the Samsung bar is not supported by the Wii.
 
  • Like
Reactions: Alexander1970
Samsung bar, fat 32 format, and i used wii backup manager to import games into my wbfs folder, also i cannot find the folder
Maybe the issue it's the Samsung bar itself. I read it's a flash drive. Wii and flash drives, often, don't mix.
Can you try with a USB Hard disk or a SD card?
If you have no wiiflow.ini in your apps/wiiflow folder, then most probably Wiiflow was't able to create it. This may suggest that the Samsung bar is not supported by the Wii.

The samsung bar worked perfectly fine before tho

--------------------- MERGED ---------------------------

Nowhere on the whole SD Card ? :blink:

EDIT: Is there maybe a WiiFlow Save in the Wii System Settings -> Wii Saves ?

Thank you.:)

I deleted that too
 
  • Like
Reactions: Alexander1970
Samsung bar, fat 32 format, and i used wii backup manager to import games into my wbfs folder, also i cannot find the folder


The samsung bar worked perfectly fine before tho

--------------------- MERGED ---------------------------



I deleted that too
I believe you, but I would check with other storage devices as well, just to be sure.
There were other cases of USB sticks that suddenly stopped working properly with the wii.
 
  • Like
Reactions: Alexander1970
I believe you, but I would check with other storage devices as well, just to be sure.
There were other cases of USB sticks that suddenly stopped working properly with the wii.

He did some "Change" from the WBFS Manager to WiiBackup Manager and now it is no longer working.
I think something goes wrong on the "Migration" Process.:unsure:
 
  • Like
Reactions: Tetsuo Shima
so i want to remove my homebrew from my wii since i lost my sd card. is there a way just to delete homebrew, and then reinstall it again?
 
Hi,
I'm trying to unmod my Wii in order to sell it. I've been using this video as a guide () but I'm not sure about the firmware version and region settings I should be using in Ohneswanzenegger.

I'm in Australia and my Wii model number is RVL001(AUS).
Being in Australia I assume I should be using the European firmware (4.3E) but I could be wrong.
There is also a few other settings that I'm not certain about when completing the settings.txt section in Ohneswanzenegger for an Australian console.
Any help would be welcome,
Thanks.
 
Last edited by Luke0606,
Hey guys, I'm having the same issue. Here is my syscheck:

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline Double_A R2-D2199 and Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)

Drive date: 02.13.2007
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 102051177
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 89 titles.
Found 47 IOS on this console. 15 of them are stubs.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249[56] (rev 65535 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS250[57] (rev 65535 Info: d2x-v10beta52): Trucha Bug NAND Access USB 2.0
IOS251[58] (rev 65535 Info: d2x-v10beta52): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65280): Stub
BC v6
MIOS v10
Report generated on 07/29/2020.

Any idea what I need to fix?
 
Hello! i have gotten hold of the wii i soft modded when i was 11. However i’m trying to update and i didn’t understand what to do with the previous answers as i think my files are different.

But i’m not sure how to use the system download thing.. do i insert my sd card into my computer?
 
Hello! i have gotten hold of the wii i soft modded when i was 11. However i’m trying to update and i didn’t understand what to do with the previous answers as i think my files are different.

But i’m not sure how to use the system download thing.. do i insert my sd card into my computer?
What are you trying to do exactly? You don't need to update the firmware of your Wii. One way to check if your Wii is modded, is by holding the "reset" button on the Wii while turning it on, you should see the Priiloader menu. If you did, congratulations, now you need to update some things, and go get an sd card if you don't have one. 😀
 
  • Like
Reactions: jeannotte
What are you trying to do exactly? You don't need to update the firmware of your Wii. One way to check if your Wii is modded, is by holding the "reset" button on the Wii while turning it on, you should see the Priiloader menu. If you did, congratulations, now you need to update some things, and go get an sd card if you don't have one. 😀
i just tried to update it and it said that it couldn’t. abs mentioned SSID, but it’s connected to my wi-fi.

Is it not because the wii is modded?
 
i just tried to update it and it said that it couldn’t. abs mentioned SSID, but it’s connected to my wi-fi.
Again, if you're trying to update your Wii there's no need/advantage in doing so, in fact there's a risk of bricking your system.
Is it not because the wii is modded?
Did Priiloader appear when holding reset on boot?
 

Site & Scene News

Popular threads in this forum