RCM Black screen.....tried everything!!

[ocelot]

after switching from sx os to atmosphere everything worked fine.
Yesterday i tried to copy metroid to the sd I didnt want to reject the payload again so i rebooted to hekate and removed the sd and usually i get a error message when removing the sd
but yesterday my switch rebooted after removing the sd in hekate and now i cant get it to work again.

I use the jig from rcmloader but all I get is a black screen im in rcm mode because the nintendo logo doesnt show and i have to hard reset in order to get the switch to reboot in OFW.

Things i tried:

- different payload methods: rcmloader, pc and mac with online injection
- different cables
- different sd cards
- ex and fat32
- switch factory setting
- atmosphere and sx os with different sd cards
- reformated the sd a couple of times


nothing works and im desperate after 3-4 years of sx os and no problems at all now this BS!

I would appreciate some advice otherwise my switch is bricked

 

[ocelot]

i would really appreciate some advice I dont know what else i can try.....

 

[HollowGrams]

i would really appreciate some advice I dont know what else i can try.....

RCM loader or pc are you using newest payloads?

 

[ocelot]

RCM loader or pc are you using newest payloads?

yes i refreshed the payload on my rcmloader....i think i permanatly damaged something when i removed my sd card when i was in hekate because the removing of the sd caused a reboot and after that i couldnt load into rcm......it seems hekate crashed but is still doing some shit in the backgorund

 

[HollowGrams]

yes i refreshed the payload on my rcmloader....i think i permanatly damaged something when i removed my sd card when i was in hekate because the removing of the sd caused a reboot and after that i couldnt load into rcm......it seems hekate crashed but is still doing some shit in the backgorund

Have you tried hard power off? Hold power 20 seconds then try again?

 

[ocelot]

Have you tried hard power off? Hold power 20 seconds then try again?

yes....

 

[HollowGrams]

So you can go into ofw but cant get into cfw

I would start with

yes....

Try another SD card if your certain your using all new files, payloads and named correctly. Tegrasmash on pc?

 

[ocelot]

So you can go into ofw but cant get into cfw

I would start with

Try another SD card if your certain your using all new files, payloads and named correctly. Tegrasmash on pc?

i did all that and yes tried tegrasmash also...

 

[HollowGrams]

i did all that and yes tried tegrasmash also...

If RCM on you dont need jig.

If RCM off and your loading payload(s):
Longshot but perhaps jig isnt triggering. In ofw check right rails. Connect joycon a few times and make sure connection is nice n tight. You can also check on PC when you connect USB while holding volume + with jig connected of course.

 

[Draxzelex]

after switching from sx os to atmosphere everything worked fine.
Yesterday i tried to copy metroid to the sd I didnt want to reject the payload again so i rebooted to hekate and removed the sd and usually i get a error message when removing the sd
but yesterday my switch rebooted after removing the sd in hekate and now i cant get it to work again.

I use the jig from rcmloader but all I get is a black screen im in rcm mode because the nintendo logo doesnt show and i have to hard reset in order to get the switch to reboot in OFW.

Things i tried:

- different payload methods: rcmloader, pc and mac with online injection
- different cables
- different sd cards
- ex and fat32
- switch factory setting
- atmosphere and sx os with different sd cards
- reformated the sd a couple of times


nothing works and im desperate after 3-4 years of sx os and no problems at all now this BS!

I would appreciate some advice otherwise my switch is bricked

Try charging the Switch.

 

[turtlechip]

after switching from sx os to atmosphere everything worked fine.
Yesterday i tried to copy metroid to the sd I didnt want to reject the payload again so i rebooted to hekate and removed the sd and usually i get a error message when removing the sd
but yesterday my switch rebooted after removing the sd in hekate and now i cant get it to work again.

I use the jig from rcmloader but all I get is a black screen im in rcm mode because the nintendo logo doesnt show and i have to hard reset in order to get the switch to reboot in OFW.

Things i tried:

- different payload methods: rcmloader, pc and mac with online injection
- different cables
- different sd cards
- ex and fat32
- switch factory setting
- atmosphere and sx os with different sd cards
- reformated the sd a couple of times


nothing works and im desperate after 3-4 years of sx os and no problems at all now this BS!

I would appreciate some advice otherwise my switch is bricked

Did you solve the problem? I have exactly the same problem as you wrote. If you have solved the problem, please share the solution.

 

[Draxzelex]

Did you solve the problem? I have exactly the same problem as you wrote. If you have solved the problem, please share the solution.

What have you tried so far to resolve the issue?

 

[turtlechip]

What have you tried so far to resolve the issue?

Everything that I can...
- different payload methods: rcmloader, pc and Rekado app.
- different cables(5 times)
- different sd cards(2 times)
- ex and fat32(several times)
- switch factory setting(2 times)
- atmosphere and sx os with different sd cards(2 times)
- reformated the sd (sevral times)
- console firmware update
- joycon update
- battery discharge, recharge
- jig exchage
- explore all the contents of gbatemp site everyday....

 

[Draxzelex]

Everything that I can...
- different payload methods: rcmloader, pc and Rekado app.
- different cables(5 times)
- different sd cards(2 times)
- ex and fat32(several times)
- switch factory setting(2 times)
- atmosphere and sx os with different sd cards(2 times)
- reformated the sd (sevral times)
- console firmware update
- joycon update
- battery discharge, recharge
- jig exchage
- explore all the contents of gbatemp site everyday....

And the console is never detected as an APX device by your computer?

 

[iiTzSamurai]

Everything that I can...
- different payload methods: rcmloader, pc and Rekado app.
- different cables(5 times)
- different sd cards(2 times)
- ex and fat32(several times)
- switch factory setting(2 times)
- atmosphere and sx os with different sd cards(2 times)
- reformated the sd (sevral times)
- console firmware update
- joycon update
- battery discharge, recharge
- jig exchage
- explore all the contents of gbatemp site everyday....

what are you formatting your sd card with? the switch itself or a program

 

[kcino]

Everything that I can...
- different payload methods: rcmloader, pc and Rekado app.
- different cables(5 times)
- different sd cards(2 times)
- ex and fat32(several times)
- switch factory setting(2 times)
- atmosphere and sx os with different sd cards(2 times)
- reformated the sd (sevral times)
- console firmware update
- joycon update
- battery discharge, recharge
- jig exchage
- explore all the contents of gbatemp site everyday....

have you tried disabling or uninstalling the driver in device manager? i think your payload failed simply disable driver for apx in your device manger after you pluch the switch into your pc and attempt to rcm it it will show up as apx then go to drivers disable and renable if it dosent work try unistalling the driver then going to tegra and reinstalling it