Hacking Cant download Sneek, help pls :/

[Carloix]

Hello y'all, hope someone read this xd.
Well, my Disc drive died a year ago, so i cant run usb backups or even enter to official Wii channels (After some seconds it says ''An error has ocurred, press eject...''). I read somewhere in this forum that using an emunand with Sneek would solve my problem, so, i tried to install sneek following a guide , but at the part of ''compiling the source'', when u had to run a comand with the cmd, it says that (see attached photo), theres somewhere else where i can find the necesary files or im doing something wrong?. plus. It is true that using an emunand could solve my problem?

 

[godreborn]

try modmii. you no longer have to compile it. it's unlikely it will fix your problem. seems unrelated.

 

[XFlak]

If using modmii for the first time to do this, see the notes at the bottom of the first post in the modmii thread to update the link used for unrar to workaround a bug in building neek. Won't be necessary to do this once I push an update

 

[Carloix]

If using modmii for the first time to do this, see the notes at the bottom of the first post in the modmii thread to update the link used for unrar to workaround a bug in building neek. Won't be necessary to do this once I push an update

Hey thanks, i absolutely didn't expect u to reply this xD. I have another problem now, when i launch the Sneek forwarder (i builded an sneek+di), it gets stuck at ''Reloading Bootmii!''. I have bootmii instaled as boot2, Also, I installed it as ios to see if the problem was resolved but it didnt worked, can u help me?

 

[XFlak]

Manually rename sd:/bootmiineek or bootmiiuneek or whatever to just "bootmii". Then launch "bootmii" via whatever method

A lot of these tools like nswitch or switch2uneek rely on renaming folders before loading bootmii IOS, which sometimes they fail to do properly, and then you get stuck at reloading bootmii

You can actually launch neek quite easily without requiring sd:/bootmii (or an SD card all together in the case of uneek or uneek+di) directly via usbloader gx. Under its setting, look for features, then near the bottom is a boot neek feature

I'm putting out a modmii update within 1 week max that will clarify these things

 

[Carloix]

Manually rename sd:/bootmiineek or bootmiiuneek or whatever to just "bootmii". Then launch "bootmii" via whatever method

A lot of these tools like nswitch or switch2uneek rely on renaming folders before loading bootmii IOS, which sometimes they fail to do properly, and then you get stuck at reloading bootmii

You can actually launch neek quite easily without requiring sd:/bootmii (or an SD card all together in the case of uneek or uneek+di) directly via usbloader gx. Under its setting, look for features, then near the bottom is a boot neek feature

I'm putting out a modmii update within 1 week max that will clarify these things

Thank you for answering so quickly, ill give it a try later, Thanks!

 

[Carloix]

Manually rename sd:/bootmiineek or bootmiiuneek or whatever to just "bootmii". Then launch "bootmii" via whatever method

A lot of these tools like nswitch or switch2uneek rely on renaming folders before loading bootmii IOS, which sometimes they fail to do properly, and then you get stuck at reloading bootmii

You can actually launch neek quite easily without requiring sd:/bootmii (or an SD card all together in the case of uneek or uneek+di) directly via usbloader gx. Under its setting, look for features, then near the bottom is a boot neek feature

I'm putting out a modmii update within 1 week max that will clarify these things

Hey, it actually worked, mi Wii its alive again :'D. Now, wich loader should i use to load games? When i enter to the integrated loader, it gives an error of ''The system is damaged. See your Wii Manual.'' or something like that :c

 

[XFlak]

I would load GX off of your real nand, then adjust the paths to your emunand, and you can launch most titles directly from GX without booting into neek

 

[godreborn]

yeah, I only have two games connected to neek with the virtual wii. they both work perfectly. others may need it, but these two I know of.

 

[Carloix]

I would load GX off of your real nand, then adjust the paths to your emunand, and you can launch most titles directly from GX without booting into neek

the problem is that when I try to use the emunand in ULGX the game does not start, I get the error `` An error has occurred, press eject ... '', due to the dead disk drive, on the other hand, when I launch uneek from nSwitch, everything works fine, I can enter the official channels and play wii games (from the disc channel, it is as if the wii randomly chooses one of my games from the usb and puts it there, I don't know how to change the game xd) without the error mentioned above, so it is mandatory to play from the uneek, any ideas? :c

 

[XFlak]

When you mentioned the integrated loader, were you referring to the DI menu that is accessed by holding 1 from the neek+di system menu?

That error you get from GX, do you also get that same error when loading official games from the disc channel? ... You could try launching neek, then launching GX from within a neek environment. It will think your emunand is real nand (in theory) and you shouldn't get that disc drive error; not 100% sure of all this, but worth a shot

 

[Carloix]

When you mentioned the integrated loader, were you referring to the DI menu that is accessed by holding 1 from the neek+di system menu?

That error you get from GX, do you also get that same error when loading official games from the disc channel? ... You could try launching neek, then launching GX from within a neek environment. It will think your emunand is real nand (in theory) and you shouldn't get that disc drive error; not 100% sure of all this, but worth a shot

No no, when i say ''integrated loader'' i mean the Wiiflow that cames with uneek.Sometimes it gives me the error of ''Ur system is damaged'', other times it boots but gets stucked in the logo. Right now i dont have any retail disc to try the drive, but i used to see movies with it, i tried to put one movie disc but the drive doesnt ''eat it'' if u know what i mean, and the eject button doesnt work too (doesnt spit out the disc). Btw, i just tried pressing ''1'' (thanks for this, i wouldnt manage to discover it if u havent said it xd) and now i can switch the games, but it only recognizes 4 of my seven games (it only shows mario kart,mario sunshine, ssbb and tloz skyward sword, but i also have the 2 wii sport games and mario and sonic olimpic games 2012,the latter do not appear, but when I enter ulgx from the real nand, they all appear)

 

[AncientBoi]

It must've Snuck away then. They're sneaky that way

 

[XFlak]

make sure you're running neek2o and not the original neek, which only supports games in an extracted format

 

[Carloix]

make sure you're running neek2o and not the original neek, which only supports games in an extracted format

Hey, I managed to get my other games to show up, I just pressed "2", then clicked "recreate game cache", neek2o restarted, and now all my games are there! Thanks for your support, man, you gave my Wii a second life x'D