Hi,
A friend of mine just purchased a Switch off eBay so that we can repair it and install CFW afterwards.
The serial starts with XAJ4001xxxx so it should be unpatched.
After the repairs were done, the console shows two major problems :
-It takes 0,47A when powered off (normal) and only 0,09A when powered on.
-It seems to enter RCM but isn't detected on the PC.
As far as the repairs go, we had to replace the M92 and the BQ to make it charge, and the connector for good measure.
Then we had to swap the P13USB that had a nice burn mark on it !
Now everything works except for the issues that I mentioned earlier.
And I have no idea why it's doing this. Maybe the burn mark is a sign that something else burned elsewhere..
PS: we work in electronic repair and I have fixed lots of different problems on Switches, but this particular one is making me go crazy...
Thanks in advance.
A friend of mine just purchased a Switch off eBay so that we can repair it and install CFW afterwards.
The serial starts with XAJ4001xxxx so it should be unpatched.
After the repairs were done, the console shows two major problems :
-It takes 0,47A when powered off (normal) and only 0,09A when powered on.
-It seems to enter RCM but isn't detected on the PC.
As far as the repairs go, we had to replace the M92 and the BQ to make it charge, and the connector for good measure.
Then we had to swap the P13USB that had a nice burn mark on it !
Now everything works except for the issues that I mentioned earlier.
And I have no idea why it's doing this. Maybe the burn mark is a sign that something else burned elsewhere..
PS: we work in electronic repair and I have fixed lots of different problems on Switches, but this particular one is making me go crazy...
Thanks in advance.
Last edited by rzkruspe,