I replaced a broken USB-C port and it is docking fine. But for any reason the backlight isn't turning on.
Then I measured the voltage at the backlight connector of my own switch and get around 14 volts if it's turned on.
The console where I am working on, shows just the standby voltage of around 4 volts.
What I can tell is, that the ribbon cable connector of the LCD seems to be a little bit damaged inside, but the display is working without the backlight (can see it under bright light). Is there any connection between the ribbon cable of the lcd and the backlight functionality?
Any ideas what could be the issue? Thanks for any help!
Then I measured the voltage at the backlight connector of my own switch and get around 14 volts if it's turned on.
The console where I am working on, shows just the standby voltage of around 4 volts.
What I can tell is, that the ribbon cable connector of the LCD seems to be a little bit damaged inside, but the display is working without the backlight (can see it under bright light). Is there any connection between the ribbon cable of the lcd and the backlight functionality?
Any ideas what could be the issue? Thanks for any help!