Hacking Question Switch wont boot up anymore

[CejayNL]

I did a factory reset on my switch and when it booted off for the reset it stayed off and now wont turn on again.
Can i fix this?

 

[Chocola]

Plug your Switch to charger directly (without dock) and press power button during 15 secs

 

[Budsixz]

I did a factory reset on my switch and when it booted off for the reset it stayed off and now wont turn on again.
Can i fix this?

Too vague information
What fw? What did you change before reset? Hacked switch? Possible autorcm?

 

[CejayNL]

Plug your Switch to charger directly (without dock) and press power button during 15 secs

Tried this but no succes

--------------------- MERGED ---------------------------

Too vague information
What fw? What did you change before reset? Hacked switch? Possible autorcm?

Was on 6.1 fw.
Had osxs installed but autorcm was disabled.

 

[Budsixz]

Tried this but no succes

--------------------- MERGED ---------------------------


Was on 6.1 fw.
Had osxs installed but autorcm was disabled.

I dont really know much about SX OS
but really it sounds like one of these 2 :
- Console went into RCM mode somehow (try to connect to PC or Push a payload with phone)
- Black Screen Freeze (try to remove memory card and then hold power button for 30 seconds. Make sure your console is charged)

 

[NoNAND]

Backup your data on the SD card then do a full format with guiformat
Since you're on 6.2 at times it can mess up on a black screen especially if you're downgrading and as a result would require the nocmac patches to run
Use this version of Hekate/Kosmos. if that doesn't work then your option would be to rebuild your NAND with ChoiDujourPC.
You're lucky to be on 6.2, it makes the process simpler.

 

[CejayNL]

I dont really know much about SX OS
but really it sounds like one of these 2 :
- Console went into RCM mode somehow (try to connect to PC or Push a payload with phone)
- Black Screen Freeze (try to remove memory card and then hold power button for 30 seconds. Make sure your console is charged)

How do i connect to pc just with a usb?
If thats the case it wont even connect then.

And i tried almost everthing i can find on the internet regarding the power button.

--------------------- MERGED ---------------------------

Backup your data on the SD card then do a full format with guiformat
Since you're on 6.2 at times it can mess up on a black screen especially if you're downgrading and as a result would require the nocmac patches to run
. if that doesn't work then your option would be to rebuild your NAND with ChoiDujourPC.
You're lucky to be on 6.2, it makes the process simpler.

Ok wil try this in a few hours.

 

[CejayNL]

Backup your data on the SD card then do a full format with guiformat
Since you're on 6.2 at times it can mess up on a black screen especially if you're downgrading and as a result would require the nocmac patches to run
. if that doesn't work then your option would be to rebuild your NAND with ChoiDujourPC.
You're lucky to be on 6.2, it makes the process simpler.

So my pc cant even find the switch dont think it want to connect.
i think it is dead.

 

[Hayato213]

What were you doing before it stops working?

 

[CejayNL]

What were you doing before it stops working?

factory reset.

 

[Hayato213]

Just a factory reset or did you restore NAND?

 

[CejayNL]

Just a factory reset or did you restore NAND?

normal factory reset

 

[Hayato213]

You can try the 30 Seconds power trick, was it in AutoRCM when you reset?

 

[CejayNL]

You can try the 30 Seconds power trick, was it in AutoRCM when you reset?

no it was off.

 

[Hayato213]

Okay if force reset by power button doesn't work, you might have to open it and unplug the battery and plug back in.

 

[Paulsar99]

If you factory reset it most likely it also cleaned the contents of your sd card.

 

[CejayNL]

If you factory reset it most likely it also cleaned the contents of your sd card.

no it was all still on there.

 

[Budsixz]

maybe it is in RCM and ran out of battery
try to keep it plugged in for about 2 hrs atleast

 

[CejayNL]

maybe it is in RCM and ran out of battery
try to keep it plugged in for about 2 hrs atleast

its been charging for 2 days now.
and the battery was full when i did the reset.

 

[Budsixz]

well then try what hayato suggests
the only thing in my mind at this point is a broken power button lol