Sorry I am a total noob. How do I disable it now and set it for an extra to load ?
@Draxzelex and @Adran_Marit
Last edited by WiseFool,
Sorry I am a total noob. How do I disable it now and set it for an extra to load ?
@Draxzelex and @Adran_Marit
I see. so since I only use SD install, time to remove it from my SD card then
one more noob question
I'm currently still on 6.2.0 (will update to later FW soon)
Goldleaf 0.5 is quite stable now? because the last time I was using 0.3 it keeps crashing when installing any games. that's why I keep using OG tinfoil until now
I updated my firmware from 7.0.1 to 8.0.0 using ChoiDujourNX, installed Atmosphere 0.8.9 and Kosmos 12.1.2, downloaded the es and fs patches from: https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/ and am using hekate ver. 4.10.1 with my rcm dongle (autoRCM enabled).
I can boot into CFW just fine and play all of my previously installed games, but when I try to launch new games that I've installed AFTER the firmware update it gives me an error telling me that the software can't be launched and when I try to launch it a second time it tells me it's corrupted.
Some games I tried to install I've had them installed before, but I deleted their save data and game data from Data Management before trying to install them again. Others I had never had them prior to now.
One game is a converted .nsp from xci - does that have anything to do with the error?
The other is the 1.0.3 update for MK 11 - I could play the game on 1.0.2, but after trying to update to 1.0.3 I've been getting this error (hence the reason why I updated in the first place, thinking that fw 8.0.0 would make the MK update work).
How can I fix this?
I can boot into CFW just fine and play all of my previously installed games, but when I try to launch new games that I've installed AFTER the firmware update it gives me an error telling me that the software can't be launched and when I try to launch it a second time it tells me it's corrupted.
Some games I tried to install I've had them installed before, but I deleted their save data and game data from Data Management before trying to install them again. Others I had never had them prior to now.
One game is a converted .nsp from xci - does that have anything to do with the error?
The other is the 1.0.3 update for MK 11 - I could play the game on 1.0.2, but after trying to update to 1.0.3 I've been getting this error (hence the reason why I updated in the first place, thinking that fw 8.0.0 would make the MK update work).
How can I fix this?
My current situation:
System version: 6.1.0
CFW: AMS 0.7.5 (Kosmos)
NSP installer: Tinfoil 0.2.1 (using Aluminiumfoil for USB install)
Firmware installer: ChoiDuJourNX version 1.0.1
Payload: hekate_ctcaer_4.2.bin
I have not followed the developments for several months, but heard that 7.0 brought new hack prevention. I want to update to a later firmware to be able to play more recent games (especially Final Fantasy X).
Questions:
1. To which exact firmware should I currently update? (What is the latest firmware that is hackable and has the most features?)
2. How should I perform the update, is it just using my current version of ChoiDuJour like before or do I have to keep other things in mind?
2. Which package of CFW files should I place on my SD card?
4. Do I have to use a new/different payload?
5. What is currently the best tool for installing NSPs over usb?
To anyone able to answer these questions (partially): thank you
!
System version: 6.1.0
CFW: AMS 0.7.5 (Kosmos)
NSP installer: Tinfoil 0.2.1 (using Aluminiumfoil for USB install)
Firmware installer: ChoiDuJourNX version 1.0.1
Payload: hekate_ctcaer_4.2.bin
I have not followed the developments for several months, but heard that 7.0 brought new hack prevention. I want to update to a later firmware to be able to play more recent games (especially Final Fantasy X).
Questions:
1. To which exact firmware should I currently update? (What is the latest firmware that is hackable and has the most features?)
2. How should I perform the update, is it just using my current version of ChoiDuJour like before or do I have to keep other things in mind?
2. Which package of CFW files should I place on my SD card?
4. Do I have to use a new/different payload?
5. What is currently the best tool for installing NSPs over usb?
To anyone able to answer these questions (partially): thank you
!
I am on latest kosmos version and the switch is in 7.0.1, I had a problem before that if i go to browser i normally go to google both on browsernx nsp and goldleaf nsp on google once i click the search line kind of thing the keyboard does not come up but the line comes then home button does nothing and so does the power button touchscreen works then it freezes, later i found out it was sys net cheat (this was like a month ago), Now it is happening again with no sys netcheat i just got emuiibo then deleted it and now the browser does not work(please do not say "Why can't you just use your phone or computer")
I need a fix plz
And fast
I need a fix plz
And fast
Last edited by Trollface1011,
https://guide.sdsetup.com
Your NAND will be a bit smaller but in the end it doesn't really matter. Keep in mind that you should only use FAT32 because exFAT has corruption issues on the switch.
--------------------- MERGED ---------------------------
1) 8.0.1 is the latest firmware and hackable. Personally I would update to 7.0.1 because there is for me no point to upgrade to 8.0.1. No game requires 8.0.1 yet (Maybe updates but idc).My current situation:
System version: 6.1.0
CFW: AMS 0.7.5 (Kosmos)
NSP installer: Tinfoil 0.2.1 (using Aluminiumfoil for USB install)
Firmware installer: ChoiDuJourNX version 1.0.1
Payload: hekate_ctcaer_4.2.bin
I have not followed the developments for several months, but heard that 7.0 brought new hack prevention. I want to update to a later firmware to be able to play more recent games (especially Final Fantasy X).
Questions:
1. To which exact firmware should I currently update? (What is the latest firmware that is hackable and has the most features?)
2. How should I perform the update, is it just using my current version of ChoiDuJour like before or do I have to keep other things in mind?
2. Which package of CFW files should I place on my SD card?
4. Do I have to use a new/different payload?
5. What is currently the best tool for installing NSPs over usb?
To anyone able to answer these questions (partially): thank you
2) With ChoiDujourNX as always.
3) Replace all old files with the latest Kosmos release.
4) No.
5) Goldtree.
I want to update sysnand and emunand to 8.0.1, I have autorcm enabled but I can't remember if I installed it with Hekate or SX OS (I think is the latest) so I want to disable it before updating, I remember that you must uninstall the autorcm with the same utility you used to install it or it can brick my system, is that true? and is there a way I can know for sure which one I used?
Hello!
First post and sorry if I'm going against board rules (search,etc.)
I bought a used switch from a friend (after checking the serial number - it's an unpatched unit) - but he has been playing online with it (He doesn't know the fw; I'll check it when I get the console)
Do I face any troubles? Is a CFW still possible? Am I locked out?
Or should i just visit the hompage you guys linked up there (even though I don't find any tips regarding my situation)
I don't care which CFW to use - I just want to play with backup games and maybe some NES/SNES Emulators.
Thank you very much for helping me!
First post and sorry if I'm going against board rules (search,etc.)
I bought a used switch from a friend (after checking the serial number - it's an unpatched unit) - but he has been playing online with it (He doesn't know the fw; I'll check it when I get the console)
Do I face any troubles? Is a CFW still possible? Am I locked out?
Or should i just visit the hompage you guys linked up there (even though I don't find any tips regarding my situation)
I don't care which CFW to use - I just want to play with backup games and maybe some NES/SNES Emulators.
Thank you very much for helping me!
Just try to enter RCM, if you can you should be good to go, do your NAND backup and go with Kosmos.
You don't have to disable autoRCM before updating.
You can enter RCM on patched units too but you can't inject a payload.
hi,
i think i have bricked my Nintendo switch and can't make it turn on again
tried the "press power button for 15 secs then press it again" method and it didn't work no matter how long i press it.
i made a nand backup when it was on 7.0.1 FW and updated it to 8.0.1 two days later i just changed Retroarch UI driver and my switch turn off
I'm trying to restore the nand backup but all to tutorials indicate that im missing two files which are BOOT0 and BOOT1
all i have in my backup folder is the following:
8-letter folder, inside it two folders and a bin file
- a folder named "dumps" with two files in it "fuses.bin" and "tsec_keys.bin".
- a folder named "restore" and in it an empty folder named "partitions"
- a file named "rawnand.bin"
and that's it, can i restore nand and get my Switch into a working condition again?
i think i have bricked my Nintendo switch and can't make it turn on again
tried the "press power button for 15 secs then press it again" method and it didn't work no matter how long i press it.
i made a nand backup when it was on 7.0.1 FW and updated it to 8.0.1 two days later i just changed Retroarch UI driver and my switch turn off
I'm trying to restore the nand backup but all to tutorials indicate that im missing two files which are BOOT0 and BOOT1
all i have in my backup folder is the following:
8-letter folder, inside it two folders and a bin file
- a folder named "dumps" with two files in it "fuses.bin" and "tsec_keys.bin".
- a folder named "restore" and in it an empty folder named "partitions"
- a file named "rawnand.bin"
and that's it, can i restore nand and get my Switch into a working condition again?
Hello all, I followed the ReiNx-Guide from here:
/guide-starter-pack-reinx-installation-and-use.512342/
and I got stuck here:
"Uploading payload (mezzo size: 92, user size: 77762, total size: 143978, total padded size: 147456)...
Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
RCM device disconnected"
(more lines above that)
The image with the 2 anime girls appears for 0.5 seconds, then it's gone (no fadeout!).
The Switch does not react until I press Power for 15s.
I can't access .nro files, I think I'm still on stock firmware.
I'm on 8.0.0 with a Fat32 formatted SD card.
I used the most recent ReiNX.bin from here: reinx.guide/
Can anyone help?
/guide-starter-pack-reinx-installation-and-use.512342/
and I got stuck here:
TegraRcmGUI (2.5) says:
"Uploading payload (mezzo size: 92, user size: 77762, total size: 143978, total padded size: 147456)...
Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
RCM device disconnected"
(more lines above that)
The image with the 2 anime girls appears for 0.5 seconds, then it's gone (no fadeout!).
The Switch does not react until I press Power for 15s.
I can't access .nro files, I think I'm still on stock firmware.
I'm on 8.0.0 with a Fat32 formatted SD card.
I used the most recent ReiNX.bin from here: reinx.guide/
Can anyone help?
I downloaded the .zip from sdsetup and injected Fusee_Atmosphere which seemed much more successfull. The switch did a thing and then booted. But I still can't do any new things. At this point I should find a or multiple of the .nro that I called from the downloaded .zip into the SD-card, right? I don't.
I then tried to inject other payloads from the payloads-folder, but none of those worked.
I know this might be against the rules and i am not too much of a noob but can someone answer my question then take away this message.
-
ButterScott101
-
Xdqwerty
what are you looking at?
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
RedColoredStars:
There is an actual trailer with footage too. lol. Going to watch it tonight. Grabbed it from... a place. -
-
@
SylverReZ:
@Psionic Roshambo, JonTron's back yet again until he disappears into the void for another 6 or so months.+1 -
-
-
-
-
-
-
