Hacking Help Ontario

[MeatieMeat]

Need to find someone in the Toronto Ontario area(or North of) to unbrick my switch
I tried and my nand backup is no good. Now it won't even go into RCM mode.
Please Help

 

[x65943]

Need to find someone in the Toronto Ontario area(or North of) to unbrick my switch
I tried and my nand backup is no good. Now it won't even go into RCM mode.
Please Help

Was your nand backup from a different firmware version, and did you update and burn fuses?

 

[MeatieMeat]

Yes they are my original back ups and I am sure I did burn fuses

 

[x65943]

It is my understanding that if you restore a backup and the fuses don't match, you should still be able to enter rcm.

What happens when you plug your switch into your PC and boot tegrarcmgui?

Btw, did you have autorcm enabled or no?

 

[Abacus01]

Yes they are my original back ups and I am sure I did burn fuses

If you cant fix your switch contact me privately. I know someone in the states that can probably get it fixed

 

[MeatieMeat]

I got auto rcm working but still cant unbrick it my fuse count is 9 and max fw says 8.0.1 I just want even stock firmware working at this point

 

[x65943]

If you cant fix your switch contact me privately. I know someone in the states that can probably get it fixed

It's nice that you want to help, but I would also say to you @MeatieMeat to be careful who you send anything to - and especially to very new members without anyone to vouch for them or contacts to prove they are trustworthy

No dig against you, but I would be wary to send anything to someone who registered 2 days ago

 

[x65943]

I got auto rcm working but still cant unbrick it my fuse count is 9 and max fw says 8.0.1 I just want even stock firmware working at this point

And you have no backup from before you restored the old nand?

 

[MeatieMeat]

I wont send it to anyone I will only take it in person thats why I was looking for someone in ontario

--------------------- MERGED ---------------------------

no just my backup from when I first started modding it and it doesnt have a boot1 or boot 0 file

 

[x65943]

I wont send it to anyone I will only take it in person thats why I was looking for someone in ontario

--------------------- MERGED ---------------------------

no just my backup from when I first started modding it and it doesnt have a boot1 or boot 0 file

Are you trying to push the hekate payload, then what? Tell me exactly what you are doing.

 

[MeatieMeat]

following Mattytrogs steps:
Brief instructions...
1) Dump all files in Dump To SD to SD card.
2) Install TegraRCMGUI
3) Get BIS keys. Use BISkeydump or launch Switchboot (in tools / info - dump all keys)
4) Restore console using "Use On PC" - "6.2.0 restore Files".
5) Restore from file:

BCPKG2-1-Normal-Main.bin
BCPKG2-2-Normal-Sub.bin
BCPKG2-3-SafeMode-Main.bin
BCPKG2-4-SafeMode-Sub.bin

5) Restore using BIS keys... Add your correct BIS key, CHECK ENTROPY...

If green and OK... Tick passthrough zeros and mount. In mounted drive(probably A,
copy all over to correct folder...

BIS key 1: SAFE is empty. Here for posterity
BIS key 2: SYSTEM - Copy all over
BIS key 3: USER - Copy all over

Power off... Launch Switchboot.bin with TegraRCMsmash or whatever

Go to tools/info option in menu
Restore BOOT0/1 without size check (in red at bottom)

Enable autoRCM if needed...

IMPORTANT:
Go back to main menu...

Go to payloads menu...
Go to SD:/

Launch fusee-primary.bin
Complete.

Go to Album / choidujour and update to one of the included firmwares (7.0.1, 8.0.0 or 8.0.1) if required.

Complete. Well done.

MT

--------------------- MERGED ---------------------------

everything goes fine until I boot fuse then I get atmosphere-nintendo-black screen

 

[x65943]

following Mattytrogs steps:
Brief instructions...
1) Dump all files in Dump To SD to SD card.
2) Install TegraRCMGUI
3) Get BIS keys. Use BISkeydump or launch Switchboot (in tools / info - dump all keys)
4) Restore console using "Use On PC" - "6.2.0 restore Files".
5) Restore from file:

BCPKG2-1-Normal-Main.bin
BCPKG2-2-Normal-Sub.bin
BCPKG2-3-SafeMode-Main.bin
BCPKG2-4-SafeMode-Sub.bin

5) Restore using BIS keys... Add your correct BIS key, CHECK ENTROPY...

If green and OK... Tick passthrough zeros and mount. In mounted drive(probably A,
copy all over to correct folder...

BIS key 1: SAFE is empty. Here for posterity
BIS key 2: SYSTEM - Copy all over
BIS key 3: USER - Copy all over

Power off... Launch Switchboot.bin with TegraRCMsmash or whatever

Go to tools/info option in menu
Restore BOOT0/1 without size check (in red at bottom)

Enable autoRCM if needed...

IMPORTANT:
Go back to main menu...

Go to payloads menu...
Go to SD:/

Launch fusee-primary.bin
Complete.

Go to Album / choidujour and update to one of the included firmwares (7.0.1, 8.0.0 or 8.0.1) if required.

Complete. Well done.

MT

--------------------- MERGED ---------------------------

everything goes fine until I boot fuse then I get atmosphere-nintendo-black screen

So did you skip this step btw

"Go to tools/info option in menu
Restore BOOT0/1 without size check (in red at bottom)"

 

[MeatieMeat]

no did that

 

[x65943]

no did that

But you told me you didn't have a boot 0/1 backup

"no just my backup from when I first started modding it and it doesnt have a boot1 or boot 0 file"

 

[MeatieMeat]

there is one in the package that mattytrog made

 

[F4mouZSt4r]

just re-create the whole nand, problem solved

 

[MeatieMeat]

Wish I knew how

--------------------- MERGED ---------------------------

This is why ppl like me shouldnt mod lol

 

[F4mouZSt4r]

DM and i will guide you

 

[MeatieMeat]

Is this an open offer I don't have anytime to do it right now but next time I get a free moment I will

 

[F4mouZSt4r]

alright, you can DM whenever you want