- Status
First, make sure your extracted, edited *.sav works with the exact *.gba game using a desktop version of the mGBA emulator. Testing with mGBA is recommended because it's considered the most accurate GBA emulator (to date).
Next, read here about how to restore the decrypted *.sav back onto the GBA VC title.
If the edited save can't be restored, assume your edits have incompatible discrepancy between native hardware and emulated software.
Next, read here about how to restore the decrypted *.sav back onto the GBA VC title.
If the edited save can't be restored, assume your edits have incompatible discrepancy between native hardware and emulated software.
If a start the game ,with the extracted savefile ,with the mGBA emulator , the savefile is not loaded, i have to start a new game with mGBA. If i change the name of the extracted savefile then it works with the mGBA emulator on pc. But i always get "savegame inject failed" when i want to put it back on the 3DS! Even when i extract it and the try to inject it again wright away ,i got this error. Whatever i do, i cannot inject a savefile.
Last edited by tall guy,
Did you make sure that the sav is the same size as one extracted from the gbavc?
at the time of injecting a sav of an emulator to the vc I gave error because the sav did not have the same size, to fix it I used a trimmer
The one i used was the extracted gbavc save file , even when i dumped it with godmode9 and then want to inject it again, i got this error:
"savegame inject failed" , the size is 128kB.
Did you really follow the instructions? As I said, we need the actual savefile and the S:/agbsave.bin file to find out what happens there.
When i want to upload the save file i get this message : "The uploaded file does not have an allowed extension. "
The dumpted savefile looks like this: 0004000000507500.gbavc.sav , and it's located in S: gm9/out .
I cannot inject it back again.
Last edited by tall guy,
Can you GodMode9 dump the current save found in your GBA VC? Provide this and the hacked *.sav file you're trying to inject. Upload the two *.sav files in an archive here. What game are you trying to get this to work on? Tell us the game's exact name, region (ie, EUR / JPN/ USA, etc.), and whether there are any rom hacks patched on it.
If you have the *.gba rom that was used to make a GBA VC injection, try to get a CRC32 hash of it (may need to archive it in WinRAR).
You can also point to us the game found here:
Uploaded the save file good i hope, i also cannot inject the savefile back , even when i did not touched it. Playing pokemon BlazedGlazed.Can you GodMode9 dump the current save found in your GBA VC? Provide this and the hacked *.sav file you're trying to inject. Upload the two *.sav files in an archive here. What game are you trying to get this to work on? Tell us the game's exact name, region (ie, EUR / JPN/ USA, etc.), and whether there are any rom hacks patched on it.
If you have the *.gba rom that was used to make a GBA VC injection, try to get a CRC32 hash of it (may need to archive it in WinRAR).
You can also point to us the game found here:
Last edited by tall guy,
The *.gba rom I used in my NSUI injection was Pokemon Blazed Glazed v1.3 with a CRC32 hash of 33A19F07 and uncompressed size of 32 MB. This was found at a blog site dated 2017/03. In NSUI setting, the ROM save type was kept with the default setting, Flash 1Mbit (Macronix, ID: 0x09C2) + RTC.
I had no problems using your 0004000000507500.gbavc.sav renamed to match the blazed-glazed-v1.3.gba on Windows desktop mGBA v0.7-b1 emulator.
After launching the game, making a dummy character profile *(& saving it), exiting back to HOME Menu, Rosalina menu (L-shoulder) + (Down, d-pad) + (Select) to Reboot and hold (Start) to get to Luma chainloader > GodMode9 trick.
- I pressed (Y) on 0004000000507500.gbavc.sav to [CLIPBOARD] select the file.
- Went into [S:] SYSNAND VIRTUAL, pressed (A) on agbsave.bin, AGBSAVE options... > Inject GBA VC save, and got the Savegame inject success.
- Pressed (Start) to boot back to HOME Menu and launched Pokemon Blazed Glazed.
- Launched the character profile, pressed (Start) to get to SAVE, and saved the game with YES.
- After saving, pressed (HOME) button to exit back to HOME Menu.
- Launched Pokemon again to see that BLAGAZ is still present.
Last edited by TurdPooCharger,
I don't know what else to tell you at this point other than reformat and check the card like what was mentioned in post #13. If the results comes back clean without an error in H2testw, reinstall that game's *.cia, and try injecting the save again.
Also, make sure you're using the latest custom firmware setup on both your SD card and CTRNAND: Luma3DS v9.1, boot9strap v1.3, and GodMode9 v1.7.1.
If instead you have Luma3DS v7.0.5 or older (arm9loaderhax), your setup needs to be updated.
Edit - If you used Asdolo's previous Ulimate GBA VC Injector, try instead making another GBA VC injection of Pokemon Glazed Blazed with NSUI Beta 27.
Last edited by TurdPooCharger,
Only update the custom firmware AFTER you've reformatted and checked your SD card with guiformat and H2testw. If your card is bad or fake, you can brick your 3DS.
Turn on the 3DS and hold (Select). If you have Luma3DS, you should be greeted with a configuration menu like this:
If it says Luma3DS v7.0.5 configuration or older, follow the A9LH to B9S guide.
***
If it's a version that v7.1 to v9.0, go ahead and do the steps in updating your B9S custom firmware. Here's a condensed and combined guide of Updating B9S and CTRNAND Luma3DS.
Last edited by TurdPooCharger,
Alright, the rest is up to you.
- Reformat and check the SD card with guiformat and H2testw.
- Make another PKM: Blz Glz GBA VC injection with NSUI Beta 27. Reinstall.
- Hanky pranky the save wanky with GodMode9 v1.7.1.
- Status
Similar threads
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
RedColoredStars:
There is an actual trailer with footage too. lol. Going to watch it tonight. Grabbed it from... a place. -
-
@
SylverReZ:
@Psionic Roshambo, JonTron's back yet again until he disappears into the void for another 6 or so months.+1 -
-
